Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:programmable-logic:tutorials:cmod-a7-gpio-demo:start [2017/05/31 19:08] – Updated for github tutorial rework Arthur Brownlearn:programmable-logic:tutorials:cmod-a7-gpio-demo:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 43: Line 43:
 ===== Downloads ===== ===== Downloads =====
  
-Cmod A7 15T Project Repository -- [[https://github.com/Digilent/Cmod-A7-15T-GPIO|GIT Repo]] [[https://github.com/Digilent/Cmod-A7-15T-GPIO/releases/download/v2016.4-1/Cmod-A7-15T-GPIO-2016.4-1.zip|ZIP Archive]]+Cmod A7 15T GPIO Project Repository -- [[https://github.com/Digilent/Cmod-A7-15T-GPIO|GIT Repo]] [[https://github.com/Digilent/Cmod-A7-15T-GPIO/releases/download/v2016.4-1/Cmod-A7-15T-GPIO-2016.4-1.zip|ZIP Archive]]
  
-Cmod A7 35T Project Repository -- [[https://github.com/Digilent/Cmod-A7-35T-GPIO|GIT Repo]] [[https://github.com/Digilent/Cmod-A7-35T-GPIO/releases/download/v2016.4-1/Cmod-A7-35T-GPIO-2016.4-1.zip|ZIP Archive]]+Cmod A7 35T GPIO Project Repository -- [[https://github.com/Digilent/Cmod-A7-35T-GPIO|GIT Repo]] [[https://github.com/Digilent/Cmod-A7-35T-GPIO/releases/download/v2016.4-1/Cmod-A7-35T-GPIO-2016.4-1.zip|ZIP Archive]]
  
 ------- -------
Line 51: Line 51:
 ===== Download and Launch the Cmod A7 GPIO Demo ===== ===== Download and Launch the Cmod A7 GPIO Demo =====
  
->1) Follow the [[:learn:programmable-logic:tutorials:github-demos:start|Using Digilent Github Demo Projects]] Tutorial. This is an HDL design project, and as such does not support Vivado SDK, select the tutorial options appropriate for a Vivado-only design. Make sure that you download the version of the project that applies to your specific board - the 15T or 35T version. Return to this guide when prompted to check for extra hardware requirements and setup.+>1) Follow the [[:learn:programmable-logic:tutorials:github-demos:start|Using Digilent Github Demo Projects]] Tutorial. This is an HDL design project, and as such does not support Vivado SDK, select the tutorial options appropriate for a Vivado-only design. Return to this guide when prompted to check for extra hardware requirements and setup. 
 +> 
 +><WRAP round important 660px> 
 +===Important=== 
 +Make sure that between the 15T and 35T versions of the project, you download the version that applies to your Cmod A7. 
 +</WRAP>
  
 >2) In order to fully use the demo, you will need to connect a serial terminal to your Cmod A7. Plug your board into your computer with a Micro USB cable and make sure the board has power. Then open a serial terminal (such as TeraTerm) on your computer. In the terminal application setup the serial port to connect to the appropriate port for your board, with a baud rate of 9600. Then return to the Github Projects Tutorial to finish programming and running the demo. >2) In order to fully use the demo, you will need to connect a serial terminal to your Cmod A7. Plug your board into your computer with a Micro USB cable and make sure the board has power. Then open a serial terminal (such as TeraTerm) on your computer. In the terminal application setup the serial port to connect to the appropriate port for your board, with a baud rate of 9600. Then return to the Github Projects Tutorial to finish programming and running the demo.
Line 81: Line 86:
 >{{:learn:programmable-logic:tutorials:cmod-a7-gpio-demo:gpio2.jpg?500|}} >{{:learn:programmable-logic:tutorials:cmod-a7-gpio-demo:gpio2.jpg?500|}}
  
-{{tag>learn programmable-logic tutorial cmod-a7}}+{{tag>learn programmable-logic project cmod-a7}}