Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:programmable-logic:tutorials:cmod-a7-getting-started-with-microblaze:start [2016/07/20 18:17] – [Description] Mikel Skreenlearn:programmable-logic:tutorials:cmod-a7-getting-started-with-microblaze:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Cmod A7 - Getting Started with Microblaze ====== ====== Cmod A7 - Getting Started with Microblaze ======
 +
 +<WRAP round important 660px>
 +=== Important! ===
 +This guide is obsolete, the updated guide can be found [[:vivado:getting-started-with-ipi:start|here]].
 +</WRAP>
  
 {{:cmod_a7:gsmb13.jpg?nolink&500|}} {{:cmod_a7:gsmb13.jpg?nolink&500|}}
Line 5: Line 10:
 ===== Overview ===== ===== Overview =====
 ==== Description ==== ==== Description ====
-This guide will provide a step by step walk-through of creating a Microblaze based hardware design using the Vivado IP Integrator for the Cmod A7 FPGA board. **NOTE: The Cmod A7 requires Vivado Design Edition or System Edition which supports the Artix-7 FPGA**+This guide will provide a step by step walk-through of creating a Microblaze based hardware design using the Vivado IP Integrator for the Cmod A7 FPGA board. 
  
  
Line 47: Line 52:
  
 === Software === === Software ===
-  * **Xilinx Vivado 2015.X** +  * **Xilinx Vivado 2015.X+** 
-    * //System Edition or Design Edition must be installed to support the Kintex-7 FPGA//+    * //Should work for 2016.X as well//
   * **Xilinx SDK**   * **Xilinx SDK**
     * //Same version as your vivado installation//     * //Same version as your vivado installation//
Line 57: Line 62:
 === Board Support Files === === Board Support Files ===
   * **Board Support Files** -- These files will describe GPIO interfaces on your board and make it easier to select your FPGA board and add GPIO IP blocks.    * **Board Support Files** -- These files will describe GPIO interfaces on your board and make it easier to select your FPGA board and add GPIO IP blocks. 
-    * Follow this Wiki guide **[[vivado:boardfiles|Vivado Board Files for Digilent 7-Series FPGA Boards]]** on how to install Board Support Files for Vivado 2015.X+    * Follow this Wiki guide **[[vivado:boardfiles|Vivado Board Files for Digilent 7-Series FPGA Boards]]** on how to install Board Support Files for Vivado 2015.X+
  
  
Line 294: Line 299:
 >{{:genesys2:gsmb27.jpg?nolink&500|}} >{{:genesys2:gsmb27.jpg?nolink&500|}}
  
-{{tag>learn programmable-logic tutorial cmod-a7 microblaze}}+/*{{tag>learn programmable-logic tutorial cmod-a7 microblaze}}*/