Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:programmable-logic:tutorials:arty-z7-hdmi-in-demo [2017/02/23 11:37] – [Prerequisites] Monica Ignatlearn:programmable-logic:tutorials:arty-z7-hdmi-in-demo [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Arty Z7 HDMI In Demo ====== ====== Arty Z7 HDMI In Demo ======
  
-{{:learn:programmable-logic:tutorials:arty-z7-hdmi-demo:hdmiout.png?500|}} 
  
 +{{:learn:programmable-logic:tutorials:arty-z7:hdmi_in.png?500|}}
 ===== Overview ===== ===== Overview =====
 +
 +==== Description ====
 +
 +The Arty Z7 HDMI In project demonstrates the usage of the HDMI in and out ports on the Arty Z7 board. There are two projects, one for each variant of the board: Arty Z7-10 and Arty Z7-20.
 +The behavior is as follows:
 + 
 +  * Video data streams in through the HDMI in port and out through the HDMI out port.
 +  * A UART interface is available to configure what is output through HDMI.
 +  * There are 3 display frame buffers that the user can choose to display or write to.
  
 ==== Features Used ==== ==== Features Used ====
Line 17: Line 26:
 ^ PWM mono audio out w/ 3.5mm jack   |    X     |       | ^ PWM mono audio out w/ 3.5mm jack   |    X     |       |
 ^ 10/100/1000 Ethernet PHY           |    X     |       | ^ 10/100/1000 Ethernet PHY           |    X     |       |
-^ 512MB 1050Mb/s DDR3 Memory         |          |   X   |+^ 512MiB 1050Mb/s DDR3 Memory        |          |   X   |
 ^ Quad-SPI Flash                     |    X     |       | ^ Quad-SPI Flash                     |    X     |       |
 ^ Two Pmod ports                     |    X     |       | ^ Two Pmod ports                     |    X     |       |
-^ chipKIT connector for XADC signals |          |   X   |+^ chipKIT connector for XADC signals |    X     |       |
 ^ USB HID Host                       |    X     |       | ^ USB HID Host                       |    X     |       |
- 
- 
-==== Description ==== 
- 
-The Arty Z7 HDMI project demonstrates the usage of the HDMI port on the Arty Z7 board. There are two projects, one for each variant of the board: Arty Z7-10 and Arty Z7-20. 
-The behavior is as follows: 
-  
-  * Frames stream out through the HDMI port. 
-  * A UART interface is available to configure what is output through HDMI. 
-  * There are 3 display frame buffers that the user can choose to display. 
  
 ------- -------
-===== Prerequisites ===== 
  
-===Skills=== +===== Prerequisites =====
-  * **Basic familiarity with Vivado & SDK** +
-    *  //This experience can be found by walking through our "Getting Started with Vivado" guide//+
  
 ===Hardware=== ===Hardware===
Line 44: Line 40:
   * **Micro-USB cable**   * **Micro-USB cable**
   * **HDMI cable**   * **HDMI cable**
 +  * **HDMI source**
   * **HDMI monitor**   * **HDMI monitor**
  
Line 49: Line 46:
   * **Vivado Design Suite & Xilinx SDK 2016.4**    * **Vivado Design Suite & Xilinx SDK 2016.4** 
     * //Version 2016.4 must be used to generate the project//     * //Version 2016.4 must be used to generate the project//
 +  * **Digilent Board Support Files for Vivado** 
 +    * Follow the [[vivado:boardfiles|Vivado Board Files for Digilent 7-Series FPGA Boards]] guide on how to install Board Support Files for Vivado.
  
 ----- -----
 ===== Downloads ===== ===== Downloads =====
-Arty Z7 Support Repository -- [[https://github.com/Digilent/Arty-Z7/archive/master.zip|ZIP]] [[https://github.com/Digilent/Arty-Z7|Git Repo]]+Arty Z7-10 Hdmi In Project Repository -- [[https://github.com/Digilent/Arty-Z7-10-hdmi-in/releases/download/v2016.4-2/Arty-Z7-10-hdmi-in-2016.4-2.zip|ZIP]] [[https://github.com/Digilent/Arty-Z7-10-hdmi-in.git|Git Repo]] 
 + 
 +Arty Z7-20 Hdmi In Project Repository -- [[https://github.com/Digilent/Arty-Z7-20-hdmi-in/releases/download/v2016.4-4/Arty-Z7-20-hdmi-in-2016.4-4.zip|ZIP]] [[https://github.com/Digilent/Arty-Z7-20-hdmi-in.git|Git Repo]]
 ------- -------
-===== How to..=====+===== Download and Launch the Arty Z7 HDMI Input Demo =====
  
-==== 1. Generate the Project ====+>1) Follow the [[:learn:programmable-logic:tutorials:github-demos:start:|Using Digilent Github Demo Projects]] Tutorial. Since this is a Vivado SDK Project, you can either directly launch SDK and import the hardware handoff, or you can generate a bitstream in Vivado before launching SDK. Select the hardware handoff options in the tutorial if you don't want to modify the project block design later. Return to this guide when prompted to check for additional hardware requirements and setup.
  
->1.1) Download the project linked in the download section and unzip it in the location of your choosing. +>2) Plug one end of the HDMI cable into a video monitor and the other into the Arty Z7 HDMI out port. Do the same for an HDMI source, likely your computer, and the HDMI in port. 
 +> 
 +>{{:learn:programmable-logic:tutorials:arty-z7:hdmi_in_setup.jpg?500|}}
  
->1.2) Generate the **hdmi_out** project in the Projects folder by following this guide before continuing: [[vivado:github|How to Generate a Project from Digilent's Github]] +>3) Turn on your board and open a serial terminal (such as TeraTerm) on your computer to receive status messages. Setup the serial port to connect to the appropriate port for your board, with a baud rate of 115200, 8 data bits, no parity bit and 1 stop bit. Then return to the Github Project Tutorial to finish programming and running the demo. 
-==== 2. Build the Project ====+> 
 +>{{:learn:programmable-logic:tutorials:arty-z7:hdmi_in.png?500|}}
  
->2.1) Click **Generate Bitstream** on the left hand menu towards the bottom. Vivado will run through both Run Synthesis and Run Implementation before it generates the bitstream automatically. + 
 +===== Using the Arty Z7 HDMI Input Demo ===== 
 + 
 +==== HDMI Display Options ==== 
 + 
 +>  1 - Change the resolution of the HDMI output to the monitor. 
 + 
 +>  2 - Change the frame buffer to display on the HDMI monitor. 
 + 
 +>  3/4 - Store a test pattern in the chosen video frame buffer - color bar or blended.
 > >
->Note: If you want, you can click each step by itself in the order of **Run Synthesis**, **Run Implementation** and then **Generate Bitstream**.+>{{:learn:programmable-logic:tutorials:arty-z7:hdmi_incolorbar.jpg?500|}}{{:learn:programmable-logic:tutorials:arty-z7:hdmi_inblend.jpg?500|}} 
 + 
 +>  5 - Start/Stop streaming video data from HDMI to the chosen video frame buffer. 
 + 
 +>  6 - Change the video frame buffer that HDMI data is streamed into. 
 + 
 +>  7 - Invert and store the current video frame into the next video frame buffer and display it.
 > >
->{{:basys3:buildflow.png?600|}}+>{{:learn:programmable-logic:tutorials:arty-z7:video_in.jpg?500|}}{{:learn:programmable-logic:tutorials:arty-z7:20170224_120103.jpg?500|}} 
 + 
 +>  8 - Scale the current video frame to the display resolution, store it into the next video frame buffer, and then display it. 
 + 
 +{{tag>learn programmable-logic project arty-z7}}