Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:programmable-logic:tutorials:arty-getting-started-with-microblaze-servers:start [2017/09/15 21:56] – [14. Program the Microblaze Processor] jon peyronlearn:programmable-logic:tutorials:arty-getting-started-with-microblaze-servers:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 344: Line 344:
 >{{:genesys2:gsmbs22.jpg?nolink&300|}} >{{:genesys2:gsmbs22.jpg?nolink&300|}}
  
->14.3) Your program will run and you should see the IP information inside of your Serial Terminal.+>14.3) In the console window at the bottom of the screen the details of the connection will be displayed. This shows all three phy speed link settings.
 > >
->{{:genesys2:gsmbs7.jpg?nolink&600|}}+>{{:learn:programmable-logic:tutorials:arty-getting-started-with-microblaze-servers:arty_echo_2017_2_number_1.jpg?600|}}
  
->14.4) Connect to the echo server by opening another terminal and connecting to the **Board IP on port 7**. +----
-> +
->{{:genesys2:gsmbs23.jpg?nolink&500|}}+
  
 ==== 15. Testing the Server with Tera Term ==== ==== 15. Testing the Server with Tera Term ====