Adding Digilent FPGA Boards to Multisim

This guide will provide a step by step tutorial of how to add a Digilent FPGA board to Multisim. To program your FPGA board through Multisim, follow this guide: Programming Digilent FPGA Boards Through Multisim.

• a Digilent FPGA trainer board
• Multisim Education version 14.2, or higher
• Xilinx Vivado

Note: This same process can be applied to earlier FPGA boards, but instead of Vivado, Xilinx ISE is required. This tutorial will only focus on utilizing Vivado.