Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
learn:instrumentation:tutorials:openlogger:update-firmware [2019/01/08 23:28] – created Arthur Brownlearn:instrumentation:tutorials:openlogger:update-firmware [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== OpenLogger - Update Firmware ======+====== OpenLogger - Firmware Update ======
  
 +===== Required Update - First-Time Connection =====
 +
 +Upon establishing a connection to the OpenLogger for the first time, WaveForms Live will check the device's firmware to see if needs to be updated. The firmware must be updated from the factory default before the OpenLogger can be used.
 +
 +**Note:** //After the first required update, described in this guide, an OpenLogger's firmware can be checked and updated through its Configuration Menu, found through the Device Manager in WaveForms Live.//
 +
 +----
 +
 +<WRAP group>
 +<WRAP column half>
 +=== 1. ===
 +Click **Update Firmware** and follow the instructions to update the firmware on the OpenLogger.
 +</WRAP>
 +<WRAP column half>
 +{{ reference:test-and-measurement:openlogger:updating-firmware-1.png?500 |}}
 +</WRAP>
 +</WRAP>
 +
 +<WRAP group>
 +<WRAP column half>
 +=== 2. ===
 +Review the **Current Firmware Version** on the device and the **Latest Firmware Version** available.
 +</WRAP>
 +<WRAP column half>
 +{{ reference:test-and-measurement:openlogger:updating-firmware-2.png?500 |}}
 +</WRAP>
 +</WRAP>
 +
 +<WRAP group>
 +<WRAP column half>
 +=== 3. ===
 +Select the latest **Available Firmware Version**.
 +</WRAP>
 +<WRAP column half>
 +{{ reference:test-and-measurement:openlogger:updating-firmware-3.png?500 |}}
 +</WRAP>
 +</WRAP>
 +
 +<WRAP group>
 +<WRAP column half>
 +=== 4. ===
 +At the bottom right corner of the screen, click **Update** to load the new firmware onto the device. The firmware update will take about 10 seconds to complete.
 +</WRAP>
 +<WRAP column half>
 +{{ reference:test-and-measurement:openlogger:updating-firmware-4.png?500 |}}
 +</WRAP>
 +</WRAP>
 +
 +<WRAP group>
 +<WRAP column half>
 +=== 5. ===
 +With the update complete, click **Done**.
 +</WRAP>
 +<WRAP column half>
 +{{ reference:test-and-measurement:openlogger:updating-firmware-6.png?500 |}}
 +</WRAP>
 +</WRAP>
 +
 +----
 +===== More Information =====
 +
 +Check out the OpenLogger's [[test-and-measurement:openlogger:start|Resource Center]] for more guides, tutorials, and projects.
 {{include_n>3}} {{include_n>3}}