Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:courses:unit-6-lab6a:start [2017/04/14 17:56] – [7.3. DC Motor Power Control] Marthalearn:courses:unit-6-lab6a:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Lab 6a: Open-loop Process Control ====== ====== Lab 6a: Open-loop Process Control ======
 +[[{}/learn/courses/unit-6/start|Back to Unit 6]]
  
 === Download This Document === === Download This Document ===
-  * {{ :learn:courses:unit-6-lab6a:lab_6a.pdf |Lab 6a PDF}}+{{ :learn:courses:unit-6-lab6a:lab_6a.pdf |Lab 6a PDF}}
  
  
 ===== 1. Objectives ===== ===== 1. Objectives =====
-  * Generate PWM outputs to implement analog motor supply voltage. +  - Generate PWM outputs to implement analog motor supply voltage. 
-  * Implement a tachometer operation using PIC32 Timers. +  - Implement a tachometer operation using PIC32 Timers. 
-  * Develop MPLAB X projects that implement open-loop and closed-loop motor control. +  - Develop MPLAB X projects that implement open-loop and closed-loop motor control. 
-  * Develop C program code to implement a PI controller and a moving averaging digital filter. +  - Develop C program code to implement a PI controller and a moving averaging digital filter. 
-  * Manage multiple background tasks in an interrupt driven system. +  - Manage multiple background tasks in an interrupt driven system. 
-  * Send real time data monitoring devices.+  - Send real time data monitoring devices.
  
  
Line 17: Line 18:
  
 ===== 2. Basic Knowledge ===== ===== 2. Basic Knowledge =====
-  * How to configure pins on a Microchip® PIC32 PPS microprocessor.  +  - How to configure pins on a Microchip® PIC32 PPS microprocessor.  
-  * How to implement a real-time system using preemptive foreground – background task control. +  - How to implement a real-time system using preemptive foreground – background task control. 
-  * How to generate a PWM output with the PIC32 processor. +  - How to generate a PWM output with the PIC32 processor. 
-  * How to configure the Analog Discovery 2 to display logic traces. +  - How to configure the Analog Discovery 2 to display logic traces. 
-  * How to implement the design process for embedded processor based systems.+  - How to implement the design process for embedded processor based systems.
  
  
Line 28: Line 29:
 ===== 3. Equipment List ===== ===== 3. Equipment List =====
 ==== 3.1. Hardware ==== ==== 3.1. Hardware ====
-  * [[http://store.digilentinc.com/basys-mx3-pic32mx-trainer-board-recommended-for-embedded-systems-courses/|Basys MX3 trainer board]] +  - [[https://digilent.com/shop/basys-mx3-pic32mx-trainer-board-for-embedded-systems-courses/|Basys MX3 trainer board]] 
-  * Workstation computer running Windows 10 or higher, MAC OS, or Linux +  - Workstation computer running Windows 10 or higher, MAC OS, or Linux 
-  * 2 [[http://store.digilentinc.com/usb-a-to-micro-b-cable/|Standard USB A to micro-B cables]] +  - 2 [[https://digilent.com/shop/usb-a-to-micro-b-cable/|Standard USB A to micro-B cables]] 
-  * [[http://store.digilentinc.com/motor-gearbox-1-19-gear-ratio-custom-12v-motor-designed-for-digilent-robot-kits/|5V DC motor with tachometer]] +  - [[https://digilent.com/shop/dc-motor-gearbox-1-19-gear-ratio-custom-12v-motor-designed-for-digilent-robot-kits/|12 V DC motor with tachometer]] 
-  * [[http://store.digilentinc.com/5v-2-5a-switching-power-supply/|5V, 2.5A power supply]]+  - [[https://digilent.com/shop/5v-4a-switching-power-supply/|5V, 4A DC power supply]]
  
 In addition, we suggest the following instruments: In addition, we suggest the following instruments:
  
-  * [[http://store.digilentinc.com/analog-discovery-2-100msps-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2]]  +  - [[https://digilent.com/shop/analog-discovery-2-100ms-s-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2]]  
-  * [[http://store.digilentinc.com/autorange-digital-multimeter-ms8217/|Digital Multimeter]]+  - [[https://digilent.com/shop/ms8217-autorange-digital-multimeter/|Digital Multimeter]]
  
  
 ==== 3.2. Software: ==== ==== 3.2. Software: ====
 The following programs must be installed on your development workstation: The following programs must be installed on your development workstation:
-  * [[http://www.microchip.com/mplab/mplab-x-ide|Microchip MPLAB X® v3.35 or higher]] +  - [[http://www.microchip.com/mplab/mplab-x-ide|Microchip MPLAB X® v3.35 or higher]] 
-  * [[http://www.microchip.com/SWLibraryWeb/product.aspx?product=PIC32%20Peripheral%20Library|PLIB Peripheral Library]] +  - [[http://www.microchip.com/SWLibraryWeb/product.aspx?product=PIC32%20Peripheral%20Library|PLIB Peripheral Library]] 
-  * [[http://www.microchip.com/xcdemo/xcpluspromo.aspx|XC32 Cross Compiler]] +  - [[http://www.microchip.com/xcdemo/xcpluspromo.aspx|XC32 Cross Compiler]] 
-  * [[http://store.digilentinc.com/waveforms-2015-download-only/|WaveForms 2015]] (if using the Analog Discovery 2) +  - [[https://digilent.com/shop/software/digilent-waveforms/|WaveForms]] (if using the Analog Discovery 2) 
-  * [[http://www.putty.org/|PuTTY Terminal Emulation]] +  - [[http://www.putty.org/|PuTTY Terminal Emulation]] 
-  * Spreadsheet application (such as Microsoft Excel)+  - Spreadsheet application (such as Microsoft Excel)
  
  
Line 53: Line 54:
  
 ===== 4. Project Takeaways ===== ===== 4. Project Takeaways =====
-  * How to read analog voltage with a PIC32 processor. +  - How to read analog voltage with a PIC32 processor. 
-  * How to use the PIC32 Output Compare to implement a PWM analog output. +  - How to use the PIC32 Output Compare to implement a PWM analog output. 
-  * How to use the PIC32 Timer and Input Capture to implement a tachometer. +  - How to use the PIC32 Timer and Input Capture to implement a tachometer. 
-  * Fundamental analog and filtering concepts for data smoothing and open-loop control.+  - Fundamental analog and filtering concepts for data smoothing and open-loop control.
  
  
Line 192: Line 193:
   - Phase 2 Construction   - Phase 2 Construction
     - Attach the workstation monitor and launch the terminal emulator application.     - Attach the workstation monitor and launch the terminal emulator application.
-    - Port in the LCD code from [[https://reference.digilentinc.com/learn/courses/unit-3-lab3a/start|Lab 3a]] or [[https://reference.digilentinc.com/learn/courses/unit-3-lab3b/start|3b]] into this project and display the motor Analog Control Input value, the percentage PWM and the motor speed in RPM. +    - Port in the LCD code from [[/learn/courses/unit-3-lab3a/start|Lab 3a]] or [[/learn/courses/unit-3-lab3b/start|3b]] into this project and display the motor Analog Control Input value, the percentage PWM and the motor speed in RPM. 
-    - Port the UART code from [[https://reference.digilentinc.com/learn/courses/unit-4-lab4a/start|Lab 4a]] into this project and initialize for 38000 BAUD with no parity.+    - Port the UART code from [[/learn/courses/unit-4-lab4a/start|Lab 4a]] into this project and initialize for 38000 BAUD with no parity.
     - Modify the background task to update the LCD and UART once each 250 ms.      - Modify the background task to update the LCD and UART once each 250 ms. 
  
Line 210: Line 211:
     - Plot the motor speed vs. percent PWM as demonstrated in Fig. 8.3. All motors have different power-speed characteristics.     - Plot the motor speed vs. percent PWM as demonstrated in Fig. 8.3. All motors have different power-speed characteristics.
  
-{{ :learn:courses:unit-6-lab6a:lab6a-fig-8-1.png?nolink |Figure 8.1. H-Bridge inputs for CW motor rotation for 60% PWM.}}+{{ :learn:courses:unit-6-lab6a:lab_6a_fig_8_1.png?nolink&1100 |Figure 8.1. H-Bridge inputs for CW motor rotation for 60% PWM.}}
 //Figure 8.1. H-Bridge inputs for CW motor rotation for 60% PWM.// //Figure 8.1. H-Bridge inputs for CW motor rotation for 60% PWM.//
  
-{{ :learn:courses:unit-6-lab6a:lab6a-fig-8-2.png?nolink |Figure 8.2. H-Bridge inputs for CCW motor rotation for 60% PWM.}}+{{ :learn:courses:unit-6-lab6a:lab_6a_fig_8_2.png?nolink&1100 |Figure 8.2. H-Bridge inputs for CCW motor rotation for 60% PWM.}}
 //Figure 8.2. H-Bridge inputs for CCW motor rotation for 60% PWM.// //Figure 8.2. H-Bridge inputs for CCW motor rotation for 60% PWM.//
 +
  
 {{ :learn:courses:unit-6-lab6a:lab6a-fig-8-3.png?nolink&600 |Figure 8.3. Example plot of motor speed vs. %PWM.}} {{ :learn:courses:unit-6-lab6a:lab6a-fig-8-3.png?nolink&600 |Figure 8.3. Example plot of motor speed vs. %PWM.}}
Line 461: Line 463:
 } }
 </code> </code>
 +
 +----
 +
 +[[{}/learn/courses/unit-6/start|Back to Unit 6]]
 +[[{}/learn/courses/unit-6-lab6b/start|Go to Lab 6b]]
 +[[{}/learn/courses/unit-7/start|Go to Unit 7]]