Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:courses:unit-5-lab5a:start [2017/05/12 19:33] – [3.1. Requirements] Talesa Bleythinglearn:courses:unit-5-lab5a:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 27: Line 27:
  
 ==== 3.2. Design ==== ==== 3.2. Design ====
-  * Analyze the IrDA remote control protocol. +  - Analyze the IrDA remote control protocol. 
-    * Determine the carrier frequency as shown in [[https://reference.digilentinc.com/learn/courses/unit-5/start#characterization_of_the_nec_irda_protocol|Fig. 7.3 of Unit 5]].+    * Determine the carrier frequency as shown in [[/learn/courses/unit-5/start#characterization_of_the_nec_irda_protocol|Fig. 7.3 of Unit 5]].
     * Determine the synchronization timing from a capture as shown in Fig. 7.5 of Unit 5.     * Determine the synchronization timing from a capture as shown in Fig. 7.5 of Unit 5.
     * Determine the bit timing for a logic 1 and logic 0 from a capture as shown in Fig. 7.6 of Unit 5.     * Determine the bit timing for a logic 1 and logic 0 from a capture as shown in Fig. 7.6 of Unit 5.
     * Identify the encoding method by comparing to waveforms shown in Reference 3.     * Identify the encoding method by comparing to waveforms shown in Reference 3.
-  * Generate a data flow diagram representing the tasks that you will use to decode an IrDA message and generate such a message. +  - Generate a data flow diagram representing the tasks that you will use to decode an IrDA message and generate such a message. 
-  * Generate a control flow diagram that represents the control flow of decoding and encoding an IrDA message for your particular remote control device.+  - Generate a control flow diagram that represents the control flow of decoding and encoding an IrDA message for your particular remote control device.
  
 ==== 3.3. Construction Phase ==== ==== 3.3. Construction Phase ====