Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:courses:unit-3:start [2021/10/13 21:06] – external edit 127.0.0.1learn:courses:unit-3:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 46: Line 46:
   - [[https://digilent.com/shop/basys-mx3-pic32mx-trainer-board-for-embedded-systems-courses/|Basys MX3 trainer board]]   - [[https://digilent.com/shop/basys-mx3-pic32mx-trainer-board-for-embedded-systems-courses/|Basys MX3 trainer board]]
     * The 2X16 LCD included on the Basys MX3 processor board can display 16 characters on each of its two lines. The display can be more easily viewed if the LCD backlight is switched on using the slide switch SW9.     * The 2X16 LCD included on the Basys MX3 processor board can display 16 characters on each of its two lines. The display can be more easily viewed if the LCD backlight is switched on using the slide switch SW9.
-  - [[http://store.digilentinc.com/usb-a-to-micro-b-cable/|Micro USB cable]]+  - [[https://digilent.com/shop/usb-a-to-micro-b-cable/|Micro USB cable]]
   - Workstation computer running Windows 10 or higher, MAC OS, or Linux   - Workstation computer running Windows 10 or higher, MAC OS, or Linux
  
 In addition, we suggest the following instruments: In addition, we suggest the following instruments:
-  - [[http://store.digilentinc.com/analog-discovery-2-100msps-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2 Logic Analyzer]]+  - [[https://digilent.com/shop/analog-discovery-2-100ms-s-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2 Logic Analyzer]]
     * Note: Fig. B.1 through Fig. B.4 in Appendix B shows an Analog discovery 2 connected directly to the LCD data pins and the three handshaking and control pins: RS, R/W, and EN. This custom modification was made to enable testing during software development. It is not required to make this modification in order to complete Lab 3a and Lab 3b. This is further explained in Appendix B.      * Note: Fig. B.1 through Fig. B.4 in Appendix B shows an Analog discovery 2 connected directly to the LCD data pins and the three handshaking and control pins: RS, R/W, and EN. This custom modification was made to enable testing during software development. It is not required to make this modification in order to complete Lab 3a and Lab 3b. This is further explained in Appendix B. 
  
Line 60: Line 60:
   - [[http://www.microchip.com/SWLibraryWeb/product.aspx?product=PIC32%20Peripheral%20Library|PLIB Peripheral Library]]   - [[http://www.microchip.com/SWLibraryWeb/product.aspx?product=PIC32%20Peripheral%20Library|PLIB Peripheral Library]]
   - [[http://www.microchip.com/xcdemo/xcpluspromo.aspx|XC32 Cross Compiler]]   - [[http://www.microchip.com/xcdemo/xcpluspromo.aspx|XC32 Cross Compiler]]
-  - [[http://store.digilentinc.com/waveforms-2015-download-only/|WaveForms]] (if using the Analog Discovery 2)+  - [[https://digilent.com/shop/software/digilent-waveforms/|WaveForms]] (if using the Analog Discovery 2)