https://dev-wiki.digilent.com/ 2026-10-22T17:44:40+00:00 https://dev-wiki.digilent.com/ https://dev-wiki.digilent.com/ttps://dev-wiki.digilent.com/lib/tpl/digilent-tpl/images/favicon.ico text/html 2022-10-04T18:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/authentication?rev=1664883527&do=diff Encrypting the Analog Discovery Pro (ADP3450/ADP3250) Overview Authentication can be added for Standard mode and Linux mode Ethernet connectivity on ADP3450/ADP3250 devices. Inventory * Analog Discovery Pro ADP3450 or Analog Discovery Pro ADP3250 text/html 2022-10-04T18:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/certifications?rev=1664883527&do=diff Analog Discovery Pro (ADP3450/ADP3250) Certifications Safety This product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use: * IEC 61010-1, EN 61010-1 * UL 61010-1, CSA 61010-1 text/html 2022-10-04T18:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/change-max-sample-rate?rev=1664883527&do=diff Modifying the Analog Discovery Pro's (ADP3450/ADP3250) System Sample Rate The Analog Discovery Pro (ADP3450/ADP3250) features the ability to increase the system's sample rate, which affects many instruments, from the default of 100 MHz to 125 MHz. Click the dropdown below to learn how to use this feature. text/html 2022-10-04T18:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/connect-to-the-internet?rev=1664883527&do=diff Connecting the Analog Discovery Pro (ADP3450/ADP3250) to the Internet Overview The Analog Discovery Pro can be connected to the internet, which gives users the ability to configure Linux mode with many available software packages and makes the device available for remote use. This guide walks you through the steps required to establish the connection and ends with using the connection to update the preinstalled text/html 2022-10-04T18:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/ethernet-streaming?rev=1664883527&do=diff Streaming Data over Ethernet from the Analog Discovery Pro (ADP3450/ADP3250) Overview Both Standard Mode and Linux Mode support using WaveForms to communicate with and control the Analog Discovery Pro through Ethernet. You can either set up a direct connection from the device to a host computer running WaveForms, or you can connect both devices to a network, and control the Analog Discovery Pro remotely. This guide presents both methods. text/html 2022-10-04T18:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/firmware-update?rev=1664883527&do=diff How to Update Standard Mode Firmware on the Analog Discovery Pro (ADP3450/ADP3250) Overview This guide walks through the process of updating the firmware used in Standard mode. Keep your device's firmware up to date to ensure that you have access to the latest tweaks and improvements, and to ensure that your WaveForms installation can talk to your device without issue. This process is performed using the WaveForms application and only takes a few minutes. text/html 2022-10-04T18:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/getting-started-guide?rev=1664883527&do=diff Analog Discovery Pro (ADP3450/ADP3250) Getting Started Guide Overview This guide will get you started with your new Analog Discovery Pro, from getting it out of the box to taking your first measurement in the default Standard mode. ---------- text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/gui?rev=1664883527&do=diff Adding a GUI for Linux on Analog Discovery Pro (ADP3450/ADP3250) This guide discusses how and why to add a Graphical User Interface (GUI) for the Analog Discovery Pro (ADP3450/ADP3250) using Virtual Network Computing (VNC) and presents how to install WaveForms on your device and use it with a wireless screen. text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/linux-mode?rev=1664883527&do=diff Getting Started in Linux Mode with the Analog Discovery Pro (ADP3450/ADP3250) The Analog Discovery Pro (ADP3450/ADP3250) is able to operate in both Standard and Linux modes. In Standard mode, the device is operated from a host computer running the WaveForms application. While this functionality remains in Linux mode, you are also able to connect directly to the device through a serial connection to operate the device independent of a typical WaveForms host. This guide presents how to get start… text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/linux-test-and-measurement-demo?rev=1664883527&do=diff Automated Testing in Linux Mode with the Analog Discovery Pro (ADP3450/ADP3250) Overview This guide demonstrates using the Analog Discovery Pro in Linux mode to automate testing the PmodAD5, a SPI-enabled ADC. Automation is accomplished using WaveForms SDK to measure analog signals going into the Pmod and SPI controls to read data out, comparing the two results. text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/linux-thingspeak-demo?rev=1664883527&do=diff Sending Data to ThingSpeak.com with Analog Discovery Pro (ADP3450/ADP3250) in Linux Mode Overview ThingSpeak, created by MathWorks, is an online platform for collecting, viewing, and analyzing data in the cloud. This guide runs through the steps required to send data captured by the Analog Discovery Pro (ADP3450/ADP3250) up to ThingSpeak and ends with an example, which uses the Pmod MIC3 to capture a sound wave, then, from the measurements, the Analog Discovery Pro calculates the noise leve… text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/logging-data-to-usb?rev=1664883527&do=diff Logging Data to a Flash Drive with Analog Discovery Pro (ADP3450/ADP3250) This page is under construction. Overview This guide demonstrates using the Analog Discovery Pro in Linux mode to automate data logging directly to a USB flash drive. Automation is accomplished using WaveForms SDK and Python 3. Before following this guide, make sure that you run the latest Linux version on your device. Follow this guide to update the Linux on your Analog Discovery Pro: text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/midi?rev=1664883527&do=diff Building a MIDI Controller with Analog Discovery Pro (ADP3450/3250) This page is under construction. A Musical Instrument Digital Interface (MIDI) controller is a key element in electronic music production. Such devices, both hardware and software, can be quite expensive, but with a bit of work, the Analog Discovery Pro can be set up as a highly customizable MIDI controller, with wireless connection capability. This guide presents, how to configure your Test & Measurement device and your c… text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/mode-selection?rev=1664883527&do=diff Mode Selection on the Analog Discovery Pro (ADP3450/ADP3250) Mode selection can be done through WaveForms using the Device Manager. With the Analog Discovery Pro connected to the host computer by USB, open WaveForms. If the Device Manager hasn't opened yet, then text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/oversampling?rev=1664883527&do=diff Sampling a Signal at 0.5 GS/s with the Analog Discovery Pro (ADP3450/ADP3250) This guide discusses how to achieve the highest sampling rates that the Analog Discovery Pro can reach. By combining 4x oversampling with the maximum sample rate of 125 MS/s text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/power-measurement-demo?rev=1664883527&do=diff Power Measurement with the Analog Discovery Pro (ADP3450/ADP3250) Overview This demo uses the Analog Discovery Pro's Oscilloscope to measure the power of an RC circuit. Because the oscilloscope only measures voltages, a sensing resistor is used with the Oscilloscope's Math channels to calculate the current passing through the circuit and further the power of each component. text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/programming-an-fpga?rev=1664883527&do=diff Programming an FPGA Board with the Analog Discovery Pro (ADP3450/ADP3250) There might be cases when you need to provide a complex stimulus to a circuit, or you might want to condition digital signals before measurement, in both cases using an FPGA board can be handy. However, FPGA boards are usually configured from a PC, so including them in a standalone measurement system might not have been an option until now. text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/recover-linux-mode?rev=1664883527&do=diff How to Update or Recover Linux Mode on the Analog Discovery Pro (ADP3450/ADP3250) Overview This guide walks through the process of updating or recovering the Analog Discovery Pro's Linux image, which is used when the device is run in Linux Mode. Updating your image ensures that you have access to the latest preinstalled packages, drivers, and software that Digilent ships within the image. You might need to recover the image in the event that something goes awry in Linux Mode. Be aware that t… text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/reference-manual?rev=1664883527&do=diff Analog Discovery Pro (ADP3450/ADP3250) Reference Manual Oscilloscope The Analog Discovery Pro (ADP3450/ADP3250) can be used with WaveForms’ Oscilloscope instrument to capture analog data via the 4 analog input (“Scope”) channels using BNC probes. text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/smart-lamp?rev=1664883527&do=diff Building a Battery Powered Smart Lamp with the Analog Discovery Pro (ADP3450/ADP3250) In this guide, the processes of designing and building a battery-powered, Bluetooth-connected RGB lamp will be presented. The Analog Discovery Pro in Linux mode will be used to control the final project and to debug the external circuits during the testing stage. To make sure that you have the latest Linux image running on your device, follow this guide: text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/specifications?rev=1664883527&do=diff Analog Discovery Pro (ADP3450/ADP3250) Specifications These specifications are valid following 30 minutes of warm-up and are typical at 25 °C unless otherwise noted. Mixed Signal Oscilloscope Analog Input Channels Supports the Oscilloscope, Voltmeter, Data Logger, Spectrum Analyzer, Network Analyzer, Impedance Analyzer, and Script Editor instruments. text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/start?rev=1664883527&do=diff Analog Discovery Pro (ADP3450/ADP3250) Getting Started * Getting Started Guide * Getting Started in Linux Mode ---------- Documentation * Reference Manual * Specifications ---------- Tutorials WaveForms Instruments * Using the Oscilloscope * Using the Waveform Generator * Using the Power Supplies * Using the Voltmeter * Using the Data Logger * Using the Logic Analyzer * Using the Pattern Generator * Using the Static I/O * Using the Spectrum Analyzer … text/html 2022-10-04T04:38:47+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/test-and-measurement/analog-discovery-pro-3x50/terminal-connection?rev=1664883527&do=diff Connecting to the Analog Discovery Pro (ADP3450/ADP3250) Over Terminal Connect the Analog Discovery Pro to a host computer via USB, open the host's device manager to find what serial port the device is connected to and make note of it. Open a terminal emulator such as PuTTY or TeraTerm and connect to the noted serial port using 115200 Baud, 8-data, 1-stop, and no parity bits.