https://dev-wiki.digilent.com/ 2026-10-23T01:18:17+00:00 https://dev-wiki.digilent.com/ https://dev-wiki.digilent.com/ttps://dev-wiki.digilent.com/lib/tpl/digilent-tpl/images/favicon.ico text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/calibration?rev=1664883525&do=diff OpenLogger - Calibration First-Time Calibration Before being used for the first time, a new OpenLogger must first be calibrated. This process determines constants used to accurately calculate analog voltages for data points being logged, and stores these constants in non-volatile memory. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/cloud-logging?rev=1664883525&do=diff OpenLogger - Cloud Logging Cloud Logging adds the ability to log data to the MathWorks ThingSpeak cloud in addition to logging to the SD card and the Chart. This guide describes how to get cloud logging working for the OpenLogger using MathWorks ThingSpeak service. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/datalogger?rev=1664883525&do=diff OpenLogger - Data Logger Simple Logging - Charting Data in WaveForms Live 1. The OpenLogger's Data Logging functionality can be accessed through the main screen of WaveForms Live. First click on the device in the Device Manager to begin interacting with it. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/gpio-logic-analyzer?rev=1664883525&do=diff OpenLogger - Digital I/O Important! The OpenLogger's Digital I/O channels are not yet supported in software. Check back later for more updates. The OpenLogger has eight 3.3v logic digital channels. Each channel can be independently configured as general purpose I/O. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/instrument-panel?rev=1664883525&do=diff OpenLogger - Instrument Panel In Waveforms Live, the OpenLogger is controlled using the Instrument Panel. The callouts below detail each of the features of this instrument panel. More information on how each of the instruments can be used can be found in each of their respective tutorials, found on the text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/log-on-boot?rev=1664883525&do=diff OpenLogger - Log on Boot Log on Boot configures the OpenLogger to automatically start logging data after it has finished booting, without the need to open WaveForms Live. This guide describes how to to get Log on Boot working for the OpenLogger. Configure the OpenLogger text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/math-and-cursors?rev=1664883525&do=diff OpenLogger - Math and Cursors Math Channels and Cursors are features of WaveForms Live used to process and measure logged data points. Note: The tutorial video below was created for the OpenScope MZ rather than the OpenLogger. There are no significant differences between the Math and Cursors features of the OpenLogger and OpenScope MZ. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/offline-support?rev=1664883525&do=diff OpenLogger - Offline Support When using OpenLogger it is recommended to use the version of WaveForms Live hosted at www.waveformslive.com as it will always provide the most current released version of the WaveForms Live software. However when internet access is not available there several alternative was to use the WaveForms Live software. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/power-supply?rev=1664883525&do=diff OpenLogger - Power Supplies The OpenLogger has two DC power supply channels each independently configurable with a range of ±4V and capable of supplying 50mA. Note: The tutorial video below was created for the OpenScope MZ rather than the OpenLogger. There are no significant differences between the Power Supply features of the OpenLogger and OpenScope MZ. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/setup?rev=1664883525&do=diff OpenLogger - Software Setup Set Up the Digilent Agent "The Digilent Agent is a service that runs in the system tray on Windows, Mac, and Linux and enables WaveForms Live to communicate with Digilent hardware. The Digilent Agent makes it easy to update the OpenLogger's firmware, configure its WiFi, and calibrate its instruments. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/update-firmware?rev=1664883525&do=diff OpenLogger - Firmware Update Required Update - First-Time Connection Upon establishing a connection to the OpenLogger for the first time, WaveForms Live will check the device's firmware to see if needs to be updated. The firmware must be updated from the factory default before the OpenLogger can be used. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/wavegen?rev=1664883525&do=diff OpenLogger - Function Generator The OpenLogger has one function generator channel that can generate 10-bit analog waveforms at up to 2 MS/s with frequency range of 1 Hz to 200 kHz and a voltage range of 3V peak-to-peak and offset of ±1.5V. The function generator can support a 20 mA output current. text/html 2022-10-04T11:38:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://dev-wiki.digilent.com/learn/instrumentation/tutorials/openlogger/wifi-setup?rev=1664883525&do=diff OpenLogger - Wifi Setup The OpenLogger is capable of connecting to WaveForms Live over the internet to log data remotely. This guide walks through how to set up the OpenLogger's Wifi capabilities. Note: The tutorial video below was created for the OpenScope MZ rather than the OpenLogger. There are no significant differences between the Wifi features of the OpenLogger and OpenScope MZ.