This is an old revision of the document!

Quick Start Guide

What's in the Box?

  • Electronics Explorer Board
  • Starter Parts Kit
    • Contains resistors capacitors, diodes, transistors, an LED, wires, and other components.
    • The main page has a detailed list of what's included in the Starter Parts Kit.
  • Micro-B USB Cable
  • Power Supply
    • Adapter for European outlets is included
    • Input: 100-240V, Output: 12V/2A

Setting up the Board

  1. Connect the EE board to your PC with the USB cable. A successful connection is indicated by a yellow/orange LED.
  2. Connect the board's external power supply. A successful connection is indicated by a red LED.
  3. Flip the “Ready” switch on the board to the “ON” position. The green indicator LED here will not turn on until the board is connected to WaveForms. (See the next section.)

Selecting the Board in WaveForms

  1. If you have not already, you can download the WaveForms Software for free from Digilent's website.
  2. When you first open WaveForms the Device Manager window should automatically appear. Click your “EExplorer” and click the “Select” button. Your EE Board is now connected to WaveForms and ready for use.

Using the Board

In progress…
Turbo is working hard to get this page ready!