This is an old revision of the document!

Quick Start Guide

What's in the Box?

  • Electronics Explorer Board
  • Starter Parts Kit
    • Contains resistors capacitors, diodes, transistors, an LED, wires, and other components.
    • The main page has a detailed list of what's included in the Starter Parts Kit.
  • Micro-B USB Cable
  • Power Supply
    • Adapter for European outlets is included
    • Input: 100-240V, Output: 12V/2A

Setting up the Board

  1. Connect the EE board to your PC with the USB cable.
  2. Connect the board's external power supply.
  3. Flip the “Ready” switch on the board to the “ON” position.
  • Note: All three of these steps must be followed for the board to be recognized in WaveForms.

Using the Board