Differences

This shows you the differences between two versions of the page.

Link to this comparison view

dsdb:rm [2016/05/04 21:12] – [20 Pmod Connectors] sbobrowiczdsdb:rm [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ======= DSDB Reference Manual ======= ======= DSDB Reference Manual =======
-====== Overview ====== 
  
 {{ :dsdb:dsdb-obl-600.png?nolink&400|}} {{ :dsdb:dsdb-obl-600.png?nolink&400|}}
Line 51: Line 50:
  
 The DSDB is compatible with Xilinx’s new high-performance Vivado Design Suite as well as the ISE/EDK toolset. These toolsets meld FPGA logic design with embedded ARM software development into an easy to use, intuitive design flow. They can be used for designing systems of any complexity, from a complete operating system running multiple server applications in tandem, down to a simple bare-metal program that controls some LEDs. The DSDB is compatible with Xilinx’s new high-performance Vivado Design Suite as well as the ISE/EDK toolset. These toolsets meld FPGA logic design with embedded ARM software development into an easy to use, intuitive design flow. They can be used for designing systems of any complexity, from a complete operating system running multiple server applications in tandem, down to a simple bare-metal program that controls some LEDs.
 +
 +{{ :dsdb:dsdb-walk-around.jpg |}}
  
 ---- ----
Line 609: Line 610:
 On-board auxiliary buffers and electronic switches control the direction of signals that differ between Source and Sink. These signals are summarized Table 14. On-board auxiliary buffers and electronic switches control the direction of signals that differ between Source and Sink. These signals are summarized Table 14.
  
-|  **Signal**  |  **Role**  |  **Description**                                             |  **Direction (Zynq POW)**  |  **How to control**  | +|  **Signal**  |  **Role**  |  **Description**                                             |  **Direction (Zynq POW)**          |  **How to control**  | 
-|  **HPD**     | Source     | Hot-plug detect; signals the presence of a Sink to a Source  | Input                      | HDMI_OUT_EN = 1      | +|  **HPD**     | Source     | Hot-plug detect; signals the presence of a Sink to a Source  | Input (requires internal pull-up)  | HDMI_OUT_EN = 1      | 
-| :::          | Sink       | :::                                                          | Output                     | HDMI_OUT_EN = 0      | +| :::          | Sink       | :::                                                          | Output                             | HDMI_OUT_EN = 0      | 
-|  **5V0**     | Source     | Auxiliary power for Sink                                     | Output                     | HDMI_OUT_EN = 1      | +|  **5V0**     | Source     | Auxiliary power for Sink                                     | Output                             | HDMI_OUT_EN = 1      | 
-| :::          | Sink       | :::                                                          | Input                      | HDMI_OUT_EN = 0      |+| :::          | Sink       | :::                                                          | Input                              | HDMI_OUT_EN = 0      |
  
 //Table 14. HDMI signal direction in Source and Sink roles. //Table 14. HDMI signal direction in Source and Sink roles.
Line 863: Line 864:
 Pmod connectors are 2x6, right-angle, 100-mil spaced female connectors that mate with standard 2x6 pin headers. Each 12-pin Pmod connector provides two 3.3V user power supplies (pins 6 and 12), two Ground signals (pins 5 and 11), and eight logic signals, as shown in Fig. 19. The 3.3V user supply is current limited to 0.3A and it is shared between Pmods, digital breadboard and MXP connector (J4). See section **1.2 User Power Supplies** and **1.3 User Power Supplies Monitoring** for a detailed description. Pmod connectors are 2x6, right-angle, 100-mil spaced female connectors that mate with standard 2x6 pin headers. Each 12-pin Pmod connector provides two 3.3V user power supplies (pins 6 and 12), two Ground signals (pins 5 and 11), and eight logic signals, as shown in Fig. 19. The 3.3V user supply is current limited to 0.3A and it is shared between Pmods, digital breadboard and MXP connector (J4). See section **1.2 User Power Supplies** and **1.3 User Power Supplies Monitoring** for a detailed description.
  
-{{ :zybo:pmod1f.png?300 |}}+{{ :basys3-pmod_connector.png?300 |}}
 //Figure 19. Pmod Connecter Front View// //Figure 19. Pmod Connecter Front View//