Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
daq-and-datalogging:documents:using_a_usb-temp-ai_module_and_daqami_to_measure_temperature [2023/07/17 04:54] – Scandiwebdaq-and-datalogging:documents:using_a_usb-temp-ai_module_and_daqami_to_measure_temperature [2023/07/28 01:09] (current) – Arthur Brown
Line 1: Line 1:
-====== Using a USB-TEMP-AI module and DAQami to measure temperature ======+====== Using a USB-TEMP-AI Module and DAQami to Measure Temperature ======
  
 This article explains how to use a USB-TEMP-AI module with DAQami to measure a 2-wire thermistor.  (A RTD sensor or thermocouple could also be used.)  This article assumes that the end-user has installed the latest MCC DAQ CD, which includes InstaCal and DAQami, and has the Steinhart-Hart Coefficients from the thermistor manufacturer.\\  This article explains how to use a USB-TEMP-AI module with DAQami to measure a 2-wire thermistor.  (A RTD sensor or thermocouple could also be used.)  This article assumes that the end-user has installed the latest MCC DAQ CD, which includes InstaCal and DAQami, and has the Steinhart-Hart Coefficients from the thermistor manufacturer.\\