Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
daq-and-datalogging:documents:usb-temp-tracerdaq-instacal-temperature-measurement [2023/07/11 05:20] – Scandiwebdaq-and-datalogging:documents:usb-temp-tracerdaq-instacal-temperature-measurement [2023/07/28 01:02] (current) – Arthur Brown
Line 1: Line 1:
-====== How to use a USB-TEMP, with a thermocouple and RTD sensor, to measure temperature with InstaCal and TracerDAQ ======+====== How to Use a USB-TEMP, With a Thermocouple and RTD Sensor, to Measure Temperature With InstaCal and TracerDAQ ======
  
 This article explains how to use a MCC USB-TEMP module with a J-type thermocouple wire (MCC part # 745690-J001) and a 3-wire, 100 Ohm RTD sensor (MCC part # 745691-02).  For software, the latest release of the MCC DAQ CD was used to install InstaCal and TracerDAQ, onto a Windows 10 system. This article explains how to use a MCC USB-TEMP module with a J-type thermocouple wire (MCC part # 745690-J001) and a 3-wire, 100 Ohm RTD sensor (MCC part # 745691-02).  For software, the latest release of the MCC DAQ CD was used to install InstaCal and TracerDAQ, onto a Windows 10 system.