Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
daq-and-datalogging:documents:usb-temp-measurement-with-instacal-and-daqami [2023/07/27 22:17] – Arthur Browndaq-and-datalogging:documents:usb-temp-measurement-with-instacal-and-daqami [2023/07/28 00:55] (current) – Arthur Brown
Line 1: Line 1:
-====== How to use a USB-TEMP, with a thermocouple and RTD sensor, to measure temperature with InstaCal and DAQami ======+====== How to Use a USB-TEMP, With a Thermocouple and RTD Sensor, to Measure Temperature With InstaCal and DAQami ======
  
 This article explains how to use a MCC USB-TEMP module with a J-type thermocouple wire (MCC part # 745690-J001) and a 3-wire, 100 Ohm RTD sensor (MCC part # 745691-02).  For software, the latest release of the MCC DAQ CD was used to install InstaCal and DAQami, onto a Windows 10 system.   This article explains how to use a MCC USB-TEMP module with a J-type thermocouple wire (MCC part # 745690-J001) and a 3-wire, 100 Ohm RTD sensor (MCC part # 745691-02).  For software, the latest release of the MCC DAQ CD was used to install InstaCal and DAQami, onto a Windows 10 system.