Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
daq-and-datalogging:documents:usb-tc-temp-ulx-for-labview-digital-io [2023/06/13 16:32] – created Scandiwebdaq-and-datalogging:documents:usb-tc-temp-ulx-for-labview-digital-io [2023/07/11 05:18] (current) – Scandiweb
Line 1: Line 1:
-====== USB-QUAD08 C/C++ Windows Example ======+====== Example Program: Digital In and Out of USB-TC/TEMP in ULx for NI LabVIEW ======
  
-The example program below demonstrates (using C++) how to configure a USB-QUAD08 channel for quadrature encoder input. The key is to set the cbCConfigScan Mode parameter to ENCODER|ENCODER_MODE_X1|ENCODER_MODE_BIT_32 (for X1 mode). You also have to specify the CTR32BIT in the Options for the cbCInScan function. For example, BACKGROUND|CONTINUOUS|CTR32BIT for continuous operation.+Here is an example program demonstrating having 4 digital inputs and 4 digital outputs of a USB-TC or USB-TEMP using ULx for NI LabVIEW.
  
-It also demonstrates device discovery which doesn't require the user to run InstaCal. InstaCal must still be installed because doing so installs the device drivers. At the bottom of this article you will find a Zip file that contains the Visual Studio 2008 project.+Requires NI LabVIEW 2010 or newer.
  
-<code> +Disclaimer:\\  
-// VC_2008_USB_QUAD08_Encoder.cpp : Defines the entry point for the console application. +The attached Code or Example is provided As Is. \\  
-// +It has not been tested or validated as a product,\\  
-#include "stdafx.h"+for use in a deployed application or system, or for use in hazardous environments. \\  
 +You assume all risks for use of the Code or Example.\\ 
  
 +This example will also work with:\\ 
 +WEB-TC,\\ 
 +WEB-TEMP,\\ 
 +WLS-TC (requires WLS-IFC),\\ 
 +WLS-TEMP (requires WLS-IFC),\\ 
 +USB-5201,\\ 
 +USB-5203.\\ 
  
-/* Include files */ 
-#include <windows.h> 
-#include <stdio.h> 
-#include <conio.h> 
-#include <string.h> 
-#include "cbw.h" 
- 
-#define RATE 100 
-#define ChanCount 1 
-#define COUNT 100 
-#define MAXNUMDEVS 100 
- 
-void main () 
-   { 
-   /* Variable Declarations */ 
-   int i=0; 
-   long curCount=0; 
-   long curIndex=0; 
- 
-   int ULStat = 0; 
- 
-   long Rate = RATE; 
-   short Status; 
-   long halfbuf = COUNT/2; 
-   bool NextReadUpper = false; 
- 
- 
-   int numberOfDevices = MAXNUMDEVS; 
-   DaqDeviceDescriptor inventory[MAXNUMDEVS]; 
-   DaqDeviceDescriptor DeviceDescriptor; 
- 
-   int BoardNum = -1; 
-  
-   float Rev = (float)CURRENTREVNUM; 
-   ULStat = cbDeclareRevision(&Rev); 
-   cbErrHandling(PRINTALL, STOPALL); 
- 
-   printf ("Demonstration of cbConfigScan() in BACKGROUND mode\n\n"); 
- 
- //Ignore InstaCal device discovery 
- cbIgnoreInstaCal(); 
- 
- //locate USB devices 
- ULStat = cbGetDaqDeviceInventory(USB_IFC, inventory, &numberOfDevices); 
- for( i = 0; i < numberOfDevices; i++) 
- { 
- DeviceDescriptor = inventory[i]; 
-  
- //Product ID for USB-QUAD08 = 0xCA    
- //Product IDs can be found in ULProps.txt located in  
- // C:\Program Files (x86)\Measurement Computing\DAQ 
- if(DeviceDescriptor.ProductID == 0xCA) 
- { 
- BoardNum = i; 
- ULStat = cbCreateDaqDevice(BoardNum, DeviceDescriptor); 
- printf("Device Name: %s\n", DeviceDescriptor.ProductName); 
- break; 
- } 
-  
- } 
- 
-   if(BoardNum < 0) 
-   { 
-    printf("USB device not found...press any key to exit\n"); 
-    getch(); 
-    return; 
-   } 
- 
- 
-   //allocate buffer 
-   HANDLE MemHandle = 0; 
-   MemHandle = cbWinBufAlloc32(COUNT); 
-   unsigned long *DataArray = (unsigned long*)MemHandle; 
- 
- 
-   ULStat = cbCConfigScan(BoardNum, 
-    0, 
-    ENCODER|ENCODER_MODE_X1|ENCODER_MODE_BIT_32, 
-    CTR_DEBOUNCE500ns, 
-    CTR_TRIGGER_AFTER_STABLE, 
-    CTR_RISING_EDGE, 
-    CTR_TICK208PT3ns, 
-    0); 
-   if(ULStat != 0) 
- printf("Error Code %d\n",ULStat); 
-  
-   ULStat = cbCConfigScan(BoardNum, 
-    1, 
-    TOTALIZE | BIT_32, 
-    CTR_DEBOUNCE500ns, 
-    CTR_TRIGGER_AFTER_STABLE, 
-    CTR_RISING_EDGE, 
-    CTR_TICK208PT3ns, 
-    0); 
-   if (ULStat != 0) 
-    printf("Error Code %d\n", ULStat); 
-   unsigned int Options = BACKGROUND|CONTINUOUS|CTR32BIT;  
- 
-   //Read Channel 0 using options BACKGROUND|CONTINUOUS|CTR32BIT; 
-   ULStat = cbCInScan(BoardNum, 
- 0, 
- 1, 
- COUNT, 
- &Rate, 
- MemHandle, 
- Options); 
- if(ULStat != 0) 
- printf("Error Code %d\n",ULStat); 
- 
- 
- 
-    while(!_kbhit()) 
-    {  
-       //this loop reads the low half of the buffer then the upper half continuously. 
-       //it uses a NextReadUpper flag so that each half of the buffer is read once 
- 
-        ULStat = cbGetStatus(BoardNum,&Status,&curCount,&curIndex,CTRFUNCTION); 
-     
-        if(ULStat != 0){ 
-         printf("Error Code %d\n",ULStat); 
-         break; 
-        } 
-        if((curIndex > halfbuf) && (NextReadUpper == false)) 
-        {    
-         NextReadUpper = true; 
-         //print first value from lower half       
- printf("%ld\t %ld\n", DataArray[0], DataArray[1]); 
- 
-        } 
-        else if((curIndex < halfbuf) && (NextReadUpper == true)) 
-        { 
-         NextReadUpper = false; 
- //print first value from upper half 
- printf ("%ld\t %ld\n",DataArray[halfbuf], DataArray[halfbuf+1]); 
- 
-        } 
-        Sleep(100); 
- 
-    } 
- 
- 
- 
- cbStopBackground(BoardNum,CTRFUNCTION); 
- cbWinBufFree(MemHandle); 
- cbReleaseDaqDevice(BoardNum); 
- 
- printf("Completed...press any key to exit\n");  
- getch(); 
-} 
-</code> 
  
 **Attachments**\\  **Attachments**\\ 
-[[ https://files.digilent.com/resources/measurement-computing/Reference Attachments/VC_2008_USB_QUAD08_Encoder.cpp | VC_2008_USB_QUAD08_Encoder.cpp]]+[[ https://files.digilent.com/reference-attachments/USBTC_4DIn_4DOut.vi | USBTC_4DIn_4DOut.vi ]]