Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
daq-and-datalogging:documents:usb-2408-usb-2416-max-frequency-calculation [2023/07/11 05:09] – Scandiwebdaq-and-datalogging:documents:usb-2408-usb-2416-max-frequency-calculation [2023/07/28 00:58] (current) – Arthur Brown
Line 1: Line 1:
-====== How to calculate the maximum frequency of a USB-2408 or USB-2416 in your program. ======+====== How to Calculate the Maximum Frequency of a USB-2408 or USB-2416 in Your Program. ======
  
 The USB-2408 Series and USB-2416 Series boards 24 bit data acquisition devices.  They can accurately measure voltages and Thermocouple signals on the same device, configured as adjacent channels if need be.  To get the most accurate reading from your thermocouples, you need to set the "Data Rate" to a low frequency such as 60 Hz.  Per the User's manual, to calculate the maximum sampling frequency, you have to use the equation: The USB-2408 Series and USB-2416 Series boards 24 bit data acquisition devices.  They can accurately measure voltages and Thermocouple signals on the same device, configured as adjacent channels if need be.  To get the most accurate reading from your thermocouples, you need to set the "Data Rate" to a low frequency such as 60 Hz.  Per the User's manual, to calculate the maximum sampling frequency, you have to use the equation: