Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
daq-and-datalogging:documents:dt9837b-matlab-analog-input-synchronization [2023/07/11 05:27] – Scandiwebdaq-and-datalogging:documents:dt9837b-matlab-analog-input-synchronization [2023/07/28 01:07] (current) – Arthur Brown
Line 1: Line 1:
-====== Synchronizing the Analog Input Subsystems of multiple DT9837B modules with MATLAB R2018b ======+====== Synchronizing the Analog Input Subsystems of Multiple DT9837B Modules with MATLAB R2018b ======
  
-This article is a guide to configuring two DT9837B modules for sychronized analog input acquisition in MATLAB R2018b.  It can also be applied to grouping other modules, of the same model, i.e. DT9837A, DT9837C, DT9847 Series, DT9857E Series.  This procedure is required since Master/Slave mode is not supported with MATLAB's 64-bit sessions.+This article is a guide to configuring two DT9837B modules for synchronized analog input acquisition in MATLAB R2018b.  It can also be applied to grouping other modules, of the same model, i.e. DT9837A, DT9837C, DT9847 Series, DT9857E Series.  This procedure is required since Master/Slave mode is not supported with MATLAB's 64-bit sessions.
  
-1. This article assumes that the target system is already configured to use Data Translation hardware with MATLAB R2018b (or newer).  If this is not the case, then refer to KB article #50741 'Configuring a Windows system to use Data Translation hardware with MATLAB R2017b' (https://kb.mccdaq.com/KnowledgebaseArticle50741.aspx).+1. This article assumes that the target system is already configured to use Data Translation hardware with MATLAB R2018b (or newer). /*  If this is not the case, then refer to KB article #50741 'Configuring a Windows system to use Data Translation hardware with MATLAB R2017b' (https://kb.mccdaq.com/KnowledgebaseArticle50741.aspx). (KB article not migrated) */
  
-2. You will need to install the latest version of Data Translation's Device Collection Manager v1.0.0.4.  Refer to KB article #50734 'DT Device Collection Manager Update' (https://kb.mccdaq.com/KnowledgebaseArticle50734.aspx).+2. You will need to install the latest version of Data Translation's Device Collection Manager v1.0.0.4. /* Refer to KB article #50734 'DT Device Collection Manager Update' (https://kb.mccdaq.com/KnowledgebaseArticle50734.aspx). (KB article not migrated) */
  
 3. Close all software applications and disconnect the DT9837B modules, if already connected to the target system's USB ports. 3. Close all software applications and disconnect the DT9837B modules, if already connected to the target system's USB ports.
Line 39: Line 39:
 {{https://files.digilent.com/reference-images/pic_mtis7.png?548x161}} {{https://files.digilent.com/reference-images/pic_mtis7.png?548x161}}
  
-12. When synchronizing multiple DT9837B modules, connect a RJ45 cable (less than 1 foot in length) between the two modules.  Please refer the DT9837 Series User's Manual (https://www.mccdaq.com/PDFs/Manuals/UM9837.pdf).+12. When synchronizing multiple DT9837B modules, connect a RJ45 cable (less than 1 foot in length) between the two modules.  Please refer to the DT9837 Series User's Manual (https://files.digilent.com/manuals/UM9837.pdf).
  
 {{https://files.digilent.com/reference-images/pic_8.png?701x535}} {{https://files.digilent.com/reference-images/pic_8.png?701x535}}