Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
daq-and-datalogging:documents:acquiring-analog-single-point [2023/06/14 05:56] – created Scandiwebdaq-and-datalogging:documents:acquiring-analog-single-point [2023/07/27 21:29] (current) – Arthur Brown
Line 1: Line 1:
-====== TechTip: ====== +====== TechTip: Acquiring a Single Analog Input Value with MCC DAQ ======
- +
-===== Acquiring a Single Analog Input Value with MCC DAQ =====+
  
 **Objective**\\  **Objective**\\ 
Line 56: Line 54:
 The following example shows how to sample an AI value using LabVIEW. The wiring diagram below shows the pertinent VIs and settings. The first channel (AiO) of hardware device #0 is asked to return one measurement value within the expected range of -10 V to +10 V.\\  The following example shows how to sample an AI value using LabVIEW. The wiring diagram below shows the pertinent VIs and settings. The first channel (AiO) of hardware device #0 is asked to return one measurement value within the expected range of -10 V to +10 V.\\ 
    
-{{https://files.digilent.com/resources/measurement-computing/Reference Images/TT-ULx-AI-Polled.png?538x184}}\\ +{{https://files.digilent.com/reference-images/TT-ULx-AI-Polled.png?538x184}}\\ 
  
 DASYLab\\  DASYLab\\ 
 Non-programmers who need to take occasional readings should consider the popular package DASYLab. The following example worksheet shows an Analog Input module with its output wired to a Digital Meter display module. The voltage reading is presented in the meter display.\\  Non-programmers who need to take occasional readings should consider the popular package DASYLab. The following example worksheet shows an Analog Input module with its output wired to a Digital Meter display module. The voltage reading is presented in the meter display.\\ 
  
-{{https://files.digilent.com/resources/measurement-computing/Reference Images/TT-AI-Single-DASYLab-1.png?502x139}}\\ +{{https://files.digilent.com/reference-images/TT-AI-Single-DASYLab-1.png?502x139}}\\ 
  
 Double-clicking on the Analog Input module allows you to access menus where you can select the N samples mode. Double-clicking on the Analog Input module allows you to access menus where you can select the N samples mode.
 Here we specify 1 for N (the number of samples.)\\  Here we specify 1 for N (the number of samples.)\\ 
  
-{{https://files.digilent.com/resources/measurement-computing/Reference Images/TT-AI-Single-DASYLab-2.png?453x457}}\\  +{{https://files.digilent.com/reference-images/TT-AI-Single-DASYLab-2.png?453x457}}\\ 
- +
-More Information\\  +
-Please contact Measurement Computing Corporation if you have any questions or if you would like any further information.\\ +
  
-  *Knowledgebase: [[https://kb.mccdaq.com/Default.aspx | kb.mccdaq.com]]\\  +**More Information**\\  
-  *Phone: 508-946-5100\\  +Please reach out to our support team on the Digilent Forum if you have any questions: [[https://forum.digilent.com/]]
-  *Fax: 508-946-9500\\ +
      
-Additional TechTips are available on our [[https://www.mccdaq.com/Technical-Articles | Data Acquisition Technical Articles web page.]]+Additional TechTips are available here in Digilent Reference: [[start]]