Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
cmod_a7:refmanual [2021/06/09 00:04] – Arthur Browncmod_a7:refmanual [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
- 
 ======= Cmod A7 Reference Manual ======= ======= Cmod A7 Reference Manual =======
 +<WRAP center round important 60%> 
 +The Cmod A7-15T is no longer in production. Once the current stock is depleted, it will be discontinued. 
 +</WRAP>
 {{ :cmod_a7:cmod_a7-obl-600.png?nolink&400|}} {{ :cmod_a7:cmod_a7-obl-600.png?nolink&400|}}
  
Line 176: Line 177:
 //Table 7.1. DIP Pin Voltage Ratings// //Table 7.1. DIP Pin Voltage Ratings//
  
-For more information on the electrical characteristics of the pins connected to the FPGA, please see the [[http://www.xilinx.com/support/documentation/data_sheets/ds181_Artix_7_Data_Sheet.pdf|Artix 7 datasheet]] from Xilinx.+For more information on the electrical characteristics of the pins connected to the FPGA, please see the [[https://docs.xilinx.com/v/u/en-US/ds181_Artix_7_Data_Sheet|Artix 7 datasheet]] from Xilinx.
  
 ==== 7.2 Analog Inputs ==== ==== 7.2 Analog Inputs ====
Line 186: Line 187:
 //Figure 7.2.1. Analog Input Circuit// //Figure 7.2.1. Analog Input Circuit//
  
-The XADC core within the Artix-7 is a dual channel 12-bit analog-to-digital converter capable of operating at 1 MSPS. Either channel can be driven by any of the two auxiliary analog inputs connected to the DIP pins. The XADC core is controlled and accessed from a user design via the Dynamic Reconfiguration Port (DRP). The DRP also provides access to voltage monitors that are present on each of the FPGA’s power rails, and a temperature sensor that is internal to the FPGA. For more information on using the XADC core, refer to the Xilinx document titled [[http://www.xilinx.com/support/documentation/user_guides/ug480_7Series_XADC.pdf|7 Series FPGAs and Zynq-7000 All Programmable SoC XADC Dual 12-Bit 1 MSPS Analog-to-Digital Converter]]. A demo that uses the XADC core is available on the Cmod A7 resource center.+The XADC core within the Artix-7 is a dual channel 12-bit analog-to-digital converter capable of operating at 1 MSPS. Either channel can be driven by any of the two auxiliary analog inputs connected to the DIP pins. The XADC core is controlled and accessed from a user design via the Dynamic Reconfiguration Port (DRP). The DRP also provides access to voltage monitors that are present on each of the FPGA’s power rails, and a temperature sensor that is internal to the FPGA. For more information on using the XADC core, refer to the Xilinx document titled [[https://docs.xilinx.com/v/u/en-US/ug480_7Series_XADC|7 Series FPGAs and Zynq-7000 All Programmable SoC XADC Dual 12-Bit 1 MSPS Analog-to-Digital Converter]]. A demo that uses the XADC core is available on the Cmod A7 resource center.
  
 ---- ----