Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
chipkit_wifire:reference_manual_revd [2017/04/08 00:03] – [10.12: RESET] James Colvinchipkit_wifire:reference_manual_revd [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 5: Line 5:
  
 This manual applies to [[chipkit_wifire:chipkit_wifire|Rev D]] of the board This manual applies to [[chipkit_wifire:chipkit_wifire|Rev D]] of the board
- 
-FIXME 
 =====Production Release===== =====Production Release=====
  
-The production boards of the Wi-FIRE are manufactured using the Microchip PIC32MZ2048EFG100 MCU. Earlier pre-production, Rev B and earlier, uses the PIC32MZ2048ECG100 MCU. The MCUs are pin for pin compatible, however the PIC32MZ2048EFG100 has substantially improved ADCs, and there is an FPU coprocessor. For the most part, code written to the pre-production Wi-FIRE will run unaltered on the Rev C or newer Wi-FIREs, with the exception of the ADCs. The Digilent core will support either MCU, even with respect to the new ADCs, as long as the chipKIT hardware abstraction API, analogRead(), was used; no sketch source code change is required. The production PCB is identical between the Rev B and Rev C, with the exception of the silk screen to indicate Rev C. +The production boards of the Wi-FIRE are manufactured using the Microchip PIC32MZ2048EFG100 MCU. Earlier pre-production, Rev B and earlier, uses the PIC32MZ2048ECG100 MCU. The MCUs are pin for pin compatible, however the PIC32MZ2048EFG100 has substantially improved ADCs, and there is an FPU coprocessor. For the most part, code written to the pre-production Wi-FIRE will run unaltered on the Rev C or newer Wi-FIREs, with the exception of the ADCs. The Digilent core will support either MCU, even with respect to the new ADCs, as long as the Arduino hardware abstraction API, analogRead(), was used; no sketch source code change is required. The production PCB is identical between the Rev B and Rev C, with the exception of the silk screen to indicate Rev C. 
  
 Rev D boards now include a new header for MIPS JTAG debugging and iFlowtrace and a few hardware changes to support this connector. Most components on the board remained the same, although nearly all of the silk screen designators were changed from Rev C. Rev D boards now include a new header for MIPS JTAG debugging and iFlowtrace and a few hardware changes to support this connector. Most components on the board remained the same, although nearly all of the silk screen designators were changed from Rev C.
Line 15: Line 13:
 ====Overview====   ====Overview====  
  
-The chipKIT Wi-FIRE is based on the popular Arduino™ open-source hardware prototyping platform and adds the performance of the Microchip PIC32MZ microcontroller. The Wi-FIRE has a WiFi MRF24 and SD card on the board, both with dedicated SPI signals. The Wi-FIRE board takes advantage of the powerful PIC32MZ2048EFG microcontroller. This microcontroller features a 32-bit MIPS M5150 processor core running at 200 MHhz, 2MB of flash program memory, and 512K of RAM data memory. The Wi-FIRE can be programmed using the Arduino IDE with the Digilent Core. It contains everything needed to start developing embedded applications. The Wi-FIRE features a USB serial port interface for connection to the Arduino IDE and can be powered via USB or by an external power supply. In addition, the Wi-FIRE is fully compatible with the advanced Microchip MPLAB®X IDE and works with all MPLAB ®X compatible in-system programmer/debuggers, such as the Microchip PICkit™3 or the Digilent® chipKIT PGM. The Wi-FIRE is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems. +The Wi-FIRE is based on the popular Arduino™ open-source hardware prototyping platform and adds the performance of the Microchip PIC32MZ microcontroller. The Wi-FIRE has a WiFi MRF24 and SD card on the board, both with dedicated SPI signals. The Wi-FIRE board takes advantage of the powerful PIC32MZ2048EFG microcontroller. This microcontroller features a 32-bit MIPS M5150 processor core running at 200 MHhz, 2MB of flash program memory, and 512K of RAM data memory. The Wi-FIRE can be programmed using the Arduino IDE with the Digilent Core. It contains everything needed to start developing embedded applications. The Wi-FIRE features a USB serial port interface for connection to the Arduino IDE and can be powered via USB or by an external power supply. In addition, the Wi-FIRE is fully compatible with the advanced Microchip MPLAB®X IDE and works with all MPLAB ®X compatible in-system programmer/debuggers, such as the Microchip PICkit™3 or the Digilent® chipKIT PGM. The Wi-FIRE is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems. 
  
 {{:chipkit_wifire:wifire-oblique.png?450 |Wi-FIRE}} {{:chipkit_wifire:wifire-oblique.png?450 |Wi-FIRE}}
Line 44: Line 42:
 {{  :chipkit_wifire:wi-fire_board_walkaround.png?800  |}} {{  :chipkit_wifire:wi-fire_board_walkaround.png?800  |}}
  
-^  Call Out  ^  Component Description  ^  Call Out  ^  Component Description  ^ +^  Call Out  ^  Component Description                  ^  Call Out  ^  Component Description                        ^ 
-|  1  |    IC3- Microchip MRF24WG0MA WiFi Module    |  14  |    JP5- Host USB Bus Power Enable    |   +|  1         |  IC3- Microchip MRF24WG0MA WiFi Module  |  14        |  JP5- Host USB Bus Power Enable               | 
-|  2  |    Reset    |  15  |    JP4- USB Overcurrent Detect    |   +|  2         |  Reset                                  |  15        |  JP4- USB Overcurrent Detect                  | 
-|  3  |    JP7- Reset Disable    |  16  |    J6- Analog and Digital Signal Connector    |   +|  3         |  JP7- Reset Disable                     |  16        |  J6- Analog and Digital Signal Connector      | 
-|  4  |    Potentiometer    |  17  |    JP1- 3.3 V / 5.0 V Shield Voltage Select    |   +|  4         |  Potentiometer                          |  17        |  JP1- 3.3 V / 5.0 V Shield Voltage Select     | 
-|  5  |    JP2- Microchip Debug Tool Connector    |  18  |    J1- Shield Power Connector    |   +|  5         |  JP2- Microchip Debug Tool Connector    |  18        |  J1- Shield Power Connector                   | 
-|  6  |    J4- I2C Signals    |  19  |    J15- 5.0 V Regulator Configuration    |   +|  6         |  J4- I2C Signals                        |  19        |  J15- 5.0 V Regulator Configuration           | 
-|  7  |    J5- Digital Signal Connector    |  20  |    J13- Power Select Jumper    |   +|  7         |  J5- Digital Signal Connector           |  20        |  J13- Power Select Jumper                     | 
-|  8  |    PIC32 Microcontroller    |  21  |    User Buttons    |   +|  8         |  PIC32 Microcontroller                  |  21        |  User Buttons                                 | 
-|  9  |    J6- Digital Signal Connector    |  23  |    J15- External Power Connector Barrel Jack    |   +|  9         |  J6- Digital Signal Connector           |  22        |  J12- External Power Connector Pin Connector  | 
-|  10  |    User LEDs    |  24  |    J12- External Power Connector Pin Connector    |   +|  10        |  User LEDs                              |  23        |  J15- External Power Connector Barrel Jack    | 
-|  11  |    J8- SPI Connector    |  24  |    JTAG/TRACE Programming/Debugging Header    |   +|  11        |  J8- SPI Connector                      |  24        |  JTAG/TRACE Programming/Debugging Header      | 
-|  12  |    JP6- USB Host or OTG Select    |  25  |    USB connector for USB Serial Converter    |   +|  12        |  JP6- USB Host or OTG Select            |  25        |  USB connector for USB Serial Converter       | 
-|  13  |    J10 & J11- USB Connectors    |  26  |    Serial Communication LEDs    |  +|  13        |  J10 & J11- USB Connectors              |  26        |  Serial Communication LEDs                    |
  
  
Line 107: Line 105:
 {{ :chipkit_wifire:j15_power_regulation_pins.png?300  |Pin arrangement of the voltage regulation options}} {{ :chipkit_wifire:j15_power_regulation_pins.png?300  |Pin arrangement of the voltage regulation options}}
  
-^  Signals  ^  Description  | +^  Signals  ^  Description                                                                                                                                                                                                                                                                                                                                                                                                                     ^ 
-|  LDO In  |  The input to the on-board linear regulator.  | +|  LDO In   |  The input to the on-board linear regulator.                                                                                                                                                                                                                                                                                                                                                                                     | 
-|  LDO Out  |  The output of the on-board regulator.  | +|  LDO Out  |  The output of the on-board regulator.                                                                                                                                                                                                                                                                                                                                                                                           | 
-|  VU  |  The unregulated input voltage selected by the jumper setting jumper block J13.  | +|  VU       |  The unregulated input voltage selected by the jumper setting jumper block J13.                                                                                                                                                                                                                                                                                                                                                  | 
-|  5V0  |  The connection to the VCC5V0 power bus on the Wi-FIRE board.  | +|  5V0      |  The connection to the VCC5V0 power bus on the Wi-FIRE board.                                                                                                                                                                                                                                                                                                                                                                    | 
-|  EN Ext  |  Singal provided to enable an external voltage regulator, if one is being used. This would allow the sketch running on the Wi-FIRE to turn on/off the external voltage regulator. When used with an external voltage regulator, this allows the board to go into an extremely low power operating mode. This signal is connected to Port D, bit 13 (RD13) on the PIC32 microntroller. This is accesible using digital pin 40.  | +|  EN Ext   |  Singal provided to enable an external voltage regulator, if one is being used. This would allow the sketch running on the Wi-FIRE to turn on/off the external voltage regulator. When used with an external voltage regulator, this allows the board to go into an extremely low power operating mode. This signal is connected to Port D, bit 13 (RD13) on the PIC32 microcontroller. This is accesible using digital pin 40.  | 
-|  GND  |  Connection to the digital ground bus on the Wi-FIRE board.  |+|  GND      |  Connection to the digital ground bus on the Wi-FIRE board.                                                                                                                                                                                                                                                                                                                                                                      |
  
 To completely disable operation of the on-board linear regulator, remove all shorting blocks from J15. To use the on-board 5 V regulator, use the provided shorting blocks to connect VU to LDO In, and to connect LDO Out to 5V0, as follows: To completely disable operation of the on-board linear regulator, remove all shorting blocks from J15. To use the on-board 5 V regulator, use the provided shorting blocks to connect VU to LDO In, and to connect LDO Out to 5V0, as follows:
Line 150: Line 148:
 The minimum high-voltage output of the PIC32 microcontroller is rated at 2.4 V when sourcing 12 mA of current. When driving a high impedance input (typical of CMOS logic) the output high voltage will be close to 3.3 V. Some 5 V devices will recognize this voltage as a logic high input, and some won’t. Many 5 V logic devices will work reliably with 3.3 V inputs. The minimum high-voltage output of the PIC32 microcontroller is rated at 2.4 V when sourcing 12 mA of current. When driving a high impedance input (typical of CMOS logic) the output high voltage will be close to 3.3 V. Some 5 V devices will recognize this voltage as a logic high input, and some won’t. Many 5 V logic devices will work reliably with 3.3 V inputs.
  
-=====5 Input/ Output Connections=====+=====5: Input/ Output Connections=====
  
 The Wi-FIRE board provides 43 of the I/O pins from the PIC32 microcontroller at pins on the input/output connectors J4, J5, J6, J7, and J8. The Wi-FIRE board provides 43 of the I/O pins from the PIC32 microcontroller at pins on the input/output connectors J4, J5, J6, J7, and J8.
Line 156: Line 154:
 The PIC32 microcontroller can source or sink a maximum of 15 mA on all digital I/O pins; however, some pins can source or sink 25 mA or even 33 mA, check with the PIC32MZ datasheet for more information. To keep the output voltage within the specified output voltage range (VOL 0.4 V, VOH 2.4 V) the pin current must be restricted to +/-10 mA on the 15 mA pins, or for the higher current pins check the PIC32MZ datasheet for the maximum currents. The maximum current that can be sourced or sunk across all I/O pins simultaneously is +/- 150 mA. The maximum voltage that can be applied to any I/O pin is 3.6 V. For more detailed specifications, refer to the PIC32MZ Data Sheet available from www.microchip.com.  The PIC32 microcontroller can source or sink a maximum of 15 mA on all digital I/O pins; however, some pins can source or sink 25 mA or even 33 mA, check with the PIC32MZ datasheet for more information. To keep the output voltage within the specified output voltage range (VOL 0.4 V, VOH 2.4 V) the pin current must be restricted to +/-10 mA on the 15 mA pins, or for the higher current pins check the PIC32MZ datasheet for the maximum currents. The maximum current that can be sourced or sunk across all I/O pins simultaneously is +/- 150 mA. The maximum voltage that can be applied to any I/O pin is 3.6 V. For more detailed specifications, refer to the PIC32MZ Data Sheet available from www.microchip.com. 
  
-The chipKIT/Arduino system uses logical pin numbers to identify digital I/O pins on the connectors. The logical pin numbers for the I/O pins on the Wi-FIRE are 0-42. These pin numbers are labeled in the silk screen on the board. Additional pins 43-70 allow access to the on board components such as the uSD, MRF24 WiFi radio, User LEDs / BTNs, and POT.+The Arduino system uses logical pin numbers to identify digital I/O pins on the connectors. The logical pin numbers for the I/O pins on the Wi-FIRE are 0-42. These pin numbers are labeled in the silk screen on the board. Additional pins 43-70 allow access to the on board components such as the uSD, MRF24 WiFi radio, User LEDs / BTNs, and POT.
  
 Pins 0-7 and 27-33 are available on header J6 on the outer and inner row of pins, respectively. Pins 8-13 and 34-41 are available on header J5 on the outer and inner row of pins, respectively. Pin 42 is also available on the outer pin labeled "A" on the silkscreen on header J5; it is normally for the reference voltage for the microcontrollers ADC, but it can also be used as a digital I/O pin. Pins 0-7 and 27-33 are available on header J6 on the outer and inner row of pins, respectively. Pins 8-13 and 34-41 are available on header J5 on the outer and inner row of pins, respectively. Pin 42 is also available on the outer pin labeled "A" on the silkscreen on header J5; it is normally for the reference voltage for the microcontrollers ADC, but it can also be used as a digital I/O pin.
Line 183: Line 181:
  
  
-The WiFi module on the Wi-FIRE is intended for use with the Digilent Embedded chipKIT network libraries, DEIPcK and DEWFcK. The DEIPcK library provides TCP/UDP/IP protocol support for all chipKIT compatible network interfaces supported by Digilent products, including the Wi-FIRE. The DEWFcK library provides the additional library support required for connecting to and operating with the Microchip MRF24WG0MA wireless network modules. Caution should be used in understanding that the DEIPcK library is different than the DNETcK network libraries. DEIPcK is the Digilent Embedded Open Source IP stack that supports both the MX and MZ processor lines, while the DNETcK IP stack is built on top of the Microchip MLA proprietary stack and only supports the MX processor line, and will not work with the Wi-FIRE.+The WiFi module on the Wi-FIRE is intended for use with the Digilent Embedded network libraries, DEIPcK and DEWFcK. The DEIPcK library provides TCP/UDP/IP protocol support for all compatible network interfaces supported by Digilent products, including the Wi-FIRE. The DEWFcK library provides the additional library support required for connecting to and operating with the Microchip MRF24WG0MA wireless network modules. Caution should be used in understanding that the DEIPcK library is different than the DNETcK network libraries. DEIPcK is the Digilent Embedded Open Source IP stack that supports both the MX and MZ processor lines, while the DNETcK IP stack is built on top of the Microchip MLA proprietary stack and only supports the MX processor line, and will not work with the Wi-FIRE.
  
 The DEWFcK library supports the MRF24WG0MA WiFi module as loaded on the Wi-FIRE. The correct header file must be used to specify the network hardware being used by the sketch. When writing a network sketch on the Wi-FIRE, use the following hardware library: The DEWFcK library supports the MRF24WG0MA WiFi module as loaded on the Wi-FIRE. The correct header file must be used to specify the network hardware being used by the sketch. When writing a network sketch on the Wi-FIRE, use the following hardware library:
Line 189: Line 187:
 #include <MRF24G.h> #include <MRF24G.h>
  
-The Digilent Embedded chipKIT network libraries are available as part of the Digilent core (Arduino IDE) download at: http://chipkit.net/started/install-chipkit-software. If you have previously installed the Digilent Network Stack as a 3rd party library, you will need to delete the Network libraries from your 3rd party sketchbook\libraries subdirectory and use the one installed with the Digilent Core (Arduino IDE). Having both libraries installed will cause compile time errors.+The Digilent Embedded network libraries are available as part of the Digilent core (Arduino IDE) download at our [[learn/software/tutorials/digilent-core-install/start|installing the Digilent Core guide]]. If you have previously installed the Digilent Network Stack as a 3rd party library, you will need to delete the Network libraries from your 3rd party sketchbook\libraries subdirectory and use the one installed with the Digilent Core (Arduino IDE). Having both libraries installed will cause compile time errors.
  
 There are reference examples demonstrating the use of these libraries as part of the examples code downloaded with the Digilent core (Arduino IDE). There are reference examples demonstrating the use of these libraries as part of the examples code downloaded with the Digilent core (Arduino IDE).
Line 230: Line 228:
 Jumper JP6 is used to provide the required USB host capacitance to the host connector being used.  Place the shorting block in the “A” position when using the standard USB type A (host) Connector (J11). Place the shorting block in the “AB” position for use with the USB micro-AB (OTG) connector (J10). Jumper JP6 is used to provide the required USB host capacitance to the host connector being used.  Place the shorting block in the “A” position when using the standard USB type A (host) Connector (J11). Place the shorting block in the “AB” position for use with the USB micro-AB (OTG) connector (J10).
  
-With JP5 shorted, chipKIT pin 25 drives the enable input of a TPS2051B Current-Limited Power Distribution Switch to supply 5 V USB power to the host connector. This switch has over-current detection capability and provides an over-current fault indication by pulling the signal USBOC low. The over-current output pin can be monitored via the chipKIT pin 8 (RA14/INT3) when JP4 is shorted. Details about the operation of the TPS2051B can be obtained from the data sheet available at www.ti.com. +With JP5 shorted, Digilent pin 25 drives the enable input of a TPS2051B Current-Limited Power Distribution Switch to supply 5 V USB power to the host connector. This switch has over-current detection capability and provides an over-current fault indication by pulling the signal USBOC low. The over-current output pin can be monitored via the Digilent pin 8 (RA14/INT3) when JP4 is shorted. Details about the operation of the TPS2051B can be obtained from the data sheet available at www.ti.com. 
  
 When using the Wi-FIRE outside the Arduino IDE environment, the Microchip Harmony Library provides USB stack code that can be used with the board. There are reference designs available on the Microchip web site demonstrating both device and host operation of PIC32 microcontrollers. These reference designs can be modified for developing USB firmware for the Wi-FIRE. When using the Wi-FIRE outside the Arduino IDE environment, the Microchip Harmony Library provides USB stack code that can be used with the board. There are reference designs available on the Microchip web site demonstrating both device and host operation of PIC32 microcontrollers. These reference designs can be modified for developing USB firmware for the Wi-FIRE.
Line 246: Line 244:
  
 =====10:    Peripheral I/O Functions===== =====10:    Peripheral I/O Functions=====
- 
  
 The PIC32 microcontroller on the Wi-FIRE board provides a number of peripheral functions. The provided peripherals are explained in the following sections. The PIC32 microcontroller on the Wi-FIRE board provides a number of peripheral functions. The provided peripherals are explained in the following sections.
  
- +====10.1:    UART Ports====
-=====10.1:    UART Ports===== +
  
 UART 4: Asynchronous serial port. Pin 0 (RX), Pin 1 (TX). This is accessed using the runtime object: Serial. These pins are connected to I/O connector J6 and are also connected to the FT232RQ USB serial converter. It is possible to use these pins to connect to an external serial device when not using the FT232RQ USB serial interface. This uses UART4 (U4RX, U4TX) on the PIC32 microcontroller. UART 4: Asynchronous serial port. Pin 0 (RX), Pin 1 (TX). This is accessed using the runtime object: Serial. These pins are connected to I/O connector J6 and are also connected to the FT232RQ USB serial converter. It is possible to use these pins to connect to an external serial device when not using the FT232RQ USB serial interface. This uses UART4 (U4RX, U4TX) on the PIC32 microcontroller.
Line 259: Line 254:
  
  
-=====10.2:    SPI=====+====10.2:    SPI====
  
 Synchronous serial port. Pin 10 (SS), Pin 11 (MOSI), Pin 12 (MISO), Pin 13 (SCK). This can be accessed using the SPI standard library. It can also be accessed using the DSPI0 object from the DSPI standard library. This uses SPI2 (SS2, SDI2, SDO2, SCK2) on the PIC32 microcontroller. These signals also appear on connector J5. Be aware that pin 13 (SCK) is shared with USER LED1, and that both LED1 and the SPI port cannot be used concurrently. Synchronous serial port. Pin 10 (SS), Pin 11 (MOSI), Pin 12 (MISO), Pin 13 (SCK). This can be accessed using the SPI standard library. It can also be accessed using the DSPI0 object from the DSPI standard library. This uses SPI2 (SS2, SDI2, SDO2, SCK2) on the PIC32 microcontroller. These signals also appear on connector J5. Be aware that pin 13 (SCK) is shared with USER LED1, and that both LED1 and the SPI port cannot be used concurrently.
Line 265: Line 260:
 **SPI1:** Synchronous serial port. This is an additional SPI interface on the PIC32 microcontroller that can be assessed using the DSPI1 object from the DSPI standard library. SS1 is accessed via digital pin number 7. SDO1 is accessed via digital pin 35. SDI1 is accessed via digital pin 36. SCK1 is connected to digital pin 5.  **SPI1:** Synchronous serial port. This is an additional SPI interface on the PIC32 microcontroller that can be assessed using the DSPI1 object from the DSPI standard library. SS1 is accessed via digital pin number 7. SDO1 is accessed via digital pin 35. SDI1 is accessed via digital pin 36. SCK1 is connected to digital pin 5. 
  
- +====10.3:    I²C====
-=====10.3:    I²C===== +
  
 Synchronous serial interface. The PIC32 microcontroller shares analog pins A4 and A5 with the two I2C signals, SDA and SCL. This uses I2C4 (SDA4, SCL4) on the PIC32 microcontroller. Both SDA4 and SCL4 are accessible on connector J4.  Synchronous serial interface. The PIC32 microcontroller shares analog pins A4 and A5 with the two I2C signals, SDA and SCL. This uses I2C4 (SDA4, SCL4) on the PIC32 microcontroller. Both SDA4 and SCL4 are accessible on connector J4. 
Line 273: Line 266:
 Note: The I2C bus uses open collector drivers to allow multiple devices to drive the bus signals. This means that external pull-up resistors must be provided to supply the logic high state for the signals.  Note: The I2C bus uses open collector drivers to allow multiple devices to drive the bus signals. This means that external pull-up resistors must be provided to supply the logic high state for the signals. 
  
- +====10.4: PWM====
-=====10.4: PWM===== +
  
 Pulse width modulated output; Pins 3 (OC1), 5 (OC2), 6 (OC3), 9 (OC4), 10 (OC9), and 11 (OC7). These can be accessed using the analogWrite() runtime function. Pulse width modulated output; Pins 3 (OC1), 5 (OC2), 6 (OC3), 9 (OC4), 10 (OC9), and 11 (OC7). These can be accessed using the analogWrite() runtime function.
  
  
-=====10.5: External Interrupts=====+====10.5: External Interrupts====
  
 +Pin 3 (INT0), Pin 2 (INT1), Pin 7 (INT2), Pin 8 (INT3), Pin 59 (INT4). Note that the pin numbers for INT0 and INT4 are different than on some other Digilent boards. INT4 is dedicated for use with the MRF24WG0MA WiFi module and is not brought out to a connector pin.
  
-Pin 3 (INT0), Pin 2 (INT1), Pin 7 (INT2), Pin 8 (INT3), Pin 59 (INT4). Note that the pin numbers for INT0 and INT4 are different than on some other chipKIT boards. INT4 is dedicated for use with the MRF24WG0MA WiFi module and is not brought out to a connector pin. +====10.6:    User LEDs====
- +
- +
-=====10.6:    User LEDs=====+
  
  
Line 292: Line 281:
  
  
-=====10.7:    User Push Buttons=====+====10.7:    User Push Buttons====
  
  
 There are two push button switches, which are labeled BTN1 (pin 46), and BTN2 (pin 47). The digitalRead() function will return LOW if the button is not pressed and HIGH when the button is pressed. There are two push button switches, which are labeled BTN1 (pin 46), and BTN2 (pin 47). The digitalRead() function will return LOW if the button is not pressed and HIGH when the button is pressed.
  
-=====10.8:    A/D Converter Reference=====+====10.8:    A/D Converter Reference====
  
  
Line 303: Line 292:
  
  
-=====10.9:    Potentiometer=====+====10.9:    Potentiometer====
  
  
-A potentiometer (pot) is provided on the board to be used as an analog signal source or analog control input. The pot is a 10 kΩ trimmer pot connected between the VCC3V3 supply and ground. The wiper of the pot is connected to analog input A12 or chipKIT pin 48. The pot is read using the analogRead() function.+A potentiometer (pot) is provided on the board to be used as an analog signal source or analog control input. The pot is a 10 kΩ trimmer pot connected between the VCC3V3 supply and ground. The wiper of the pot is connected to analog input A12 or Digilent pin 48. The pot is read using the analogRead() function.
  
  
-=====10.10:       VU Voltage Monitor=====+====10.10:   VU Voltage Monitor====
  
  
Line 315: Line 304:
  
  
-=====10.11:       RTCC=====+====10.11:  RTCC====
  
  
Line 324: Line 313:
  
  
-=====10.12:       RESET===== +====10.12: RESET====
  
 The PIC32 microcontroller is reset by bringing its MCLR pin low. The MCLR pin is connected to the RST pin, as presented on J1. The PIC32 microcontroller is reset by bringing its MCLR pin low. The MCLR pin is connected to the RST pin, as presented on J1.
Line 340: Line 328:
  
 A reset button is located to the right of the MRF24WG0MA WiFi module. Pressing this button resets the PIC32 microcontroller. A reset button is located to the right of the MRF24WG0MA WiFi module. Pressing this button resets the PIC32 microcontroller.
- 
- 
  
  
 =====11: Microchip Development Tool Compatibility===== =====11: Microchip Development Tool Compatibility=====
- 
  
 In addition to being used with the Arduino IDE, the Wi-FIRE board can be used as a more traditional microcontroller development board using Microchip Development Tools. In addition to being used with the Arduino IDE, the Wi-FIRE board can be used as a more traditional microcontroller development board using Microchip Development Tools.
Line 368: Line 353:
  
 More information on how to use OpenOCD Debug with the Wi-FIRE can be found via MIPS Debug OpenOCD with Bus Blaster Getting Started Guide available on the [[https://community.imgtec.com/developers/mips/tools/mips-debug-and-trace-probes/bus-blaster|Imagination Technologies website]]. More information on how to use OpenOCD Debug with the Wi-FIRE can be found via MIPS Debug OpenOCD with Bus Blaster Getting Started Guide available on the [[https://community.imgtec.com/developers/mips/tools/mips-debug-and-trace-probes/bus-blaster|Imagination Technologies website]].
- 
- 
  
 =====13: Pinout Tables===== =====13: Pinout Tables=====
- 
  
 The following tables show the relationship between the digital pin numbers, the connector pin numbers, and the microcontroller pin numbers. The following tables show the relationship between the digital pin numbers, the connector pin numbers, and the microcontroller pin numbers.
  
-In the following tables, columns labeled digital pin # refer to the digital pin number. This is the value that is passed to the pinMode(), digitalRead(), digitalWrite() and other functions which refer to the pin. +In the following tables, columns labeled Digilent pin # refer to the digital pin number. This is the value that is passed to the pinMode(), digitalRead(), digitalWrite() and other functions which refer to the pin.
  
-====12.1: Pinout Table by Digital Pin Number====+==== 13.1: Pinout Table by Digilent Pin Number ==== 
 +^  Digilent Pin #  ^  MCU Pin  ^  Port Bit  ^  PIC32 Signal Name  ^  Function  ^ 
 +|  0  |  57  |  RF02  |  EBIRDY3/RPF2/SDA3/RF2  |  GPIO, U4RX  |   
 +|  1  |  58  |  RF08  |  EBIRDY2/RPF8/SCL3/RF8  |  GPIO, U4TX  |   
 +|  2  |  18  |  RE08  |  AN25/AERXD0/RPE8/RE8  |  GPIO, IC1, INT1  |   
 +|  3  |  71  |  RD00  |  EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0  |  PWM 1, INT0, OC1  |   
 +|  4  |  60  |  RA03  |  EBIRDY1/SDA2/RA3  |  GPIO  |   
 +|  5  |  76  |  RD01  |  RPD1/SCK1/RD1  |  PWM 2, OC2  |   
 +|  6  |  77  |  RD02  |  EBID14/ETXEN/RPD2/PMD14/RD2  |  PWM 3, OC3  |   
 +|  7  |  19  |  RE09  |  AN26/AERXD1/RPE9/RE9  |  GPIO, IC2,  INT2  |   
 +|  8  |  66  |  RA14  |  AETXCLK/RPA14/SCL1/RA14  |  GPIO, IC3, INT3  |   
 +|  9  |  78  |  RD03  |  EBID15/ETXCLK/RPD3/PMD15/RD3  |  PWM 4, OC4  |   
 +|  10  |  16  |  RG09  |  EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9  |  SPI_SS2, PWM 5, OC9, IC6  |   
 +|  11  |  70  |  RD11  |  EMDC/AEMDC/RPD11/RD11  |  SPI_SDO2/SDI2 PWM 6, OC7  |   
 +|  12  |  85  |  RF00  |  EBID11/ETXD1/RPF0/PMD11/RF0  |  SPI_SDI2/SDO2, T5CK(+)  |   
 +|  13  |  10  |  RG06  |  AN14/C1IND/ECOL/RPG6/SCK2/RG6  |  SPI_SCK2, USER LED1  |   
 +|  14  |  20  |  RB05  |  AN45/C1INA/RPB5/RB5  |  AIN0, GPIO  |   
 +|  15  |  33  |  RB09  |  EBIA7/AN49/RPB9/PMA7/RB9  |  AIN1, GPIO  |   
 +|  16  |  7  |  RC02  |  EBIA12/AN21/RPC2/PMA12/RC2  |  AIN2, GPIO  |   
 +|  17  |  44  |  RB15  |  EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15  |  AIN3, GPIO  |   
 +|  18  |  11  |  RG07  |  EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7  |  AIN4, SDA  |   
 +|  19  |  12  |  RG08  |  EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8  |  AIN5, SCL  |   
 +|  20  |  22  |  RB03  |  AN3/C2INA/RPB3/RB3  |  AIN6, GPIO  |   
 +|  21  |  23  |  RB02  |  AN2/C2INB/RPB2/RB2  |  AIN7, GPIO  |   
 +|  22  |  21  |  RB04  |  AN4/C1INB/RB4  |  AIN8, GPIO  |   
 +|  23  |  24  |  RB01  |  PGEC1/AN1/RPB1/RB1  |  AIN9, GPIO  |   
 +|  24  |  32  |  RB08  |  EBIA10/AN48/RPB8/PMA10/RB8  |  AIN10, GPIO  |   
 +|  25  |  25  |  RB00  |  PGED1/AN0/RPB0/RB0  |  AIN11, GPIO, P32_VBUSON  |   
 +|  26  |  91  |  RE00  |  EBID0/PMD0/RE0  |  GPIO  |   
 +|  27  |  94  |  RE01  |  EBID1/PMD1/RE1  |  GPIO  |   
 +|  28  |  98  |  RE02  |  EBID2/PMD2/RE2  |  GPIO  |   
 +|  29  |  99  |  RE03  |  EBID3/RPE3/PMD3/RE3  |  GPIO  |   
 +|  30  |  100  |  RE04  |  EBID4/AN18/PMD4/RE4  |  GPIO  |   
 +|  31  |  3  |  RE05  |  EBID5/AN17/RPE5/PMD5/RE5  |  GPIO  |   
 +|  32  |  4  |  RE06  |  EBID6/AN16/PMD6/RE6  |  GPIO  |   
 +|  33  |  5  |  RE07  |  EBID7/AN15/PMD7/RE7  |  GPIO  |   
 +|  34  |  82  |  RD05  |  SQICS1/RPD5/RD5  |  GPIO, T4CK  |   
 +|  35  |  6  |  RC01  |  EBIA6/AN22/RPC1/PMA6/RC1  |  GPIO, T2CK, IC7  |   
 +|  36  |  86  |  RF01  |  EBID10/ETXD0/RPF1/PMD10/RF1  |  GPIO, T6CK  |   
 +|  37  |  59  |  RA02  |  EBICS0/SCL2/RA2  |  GPIO  |   
 +|  38  |  79  |  RD12  |  EBID12/ETXD2/RPD12/PMD12/RD12  |  GPIO, T3Ck  |   
 +|  39  |  47  |  RD14  |  AN32/AETXD0/RPD14/RD14  |  GPIO, U1RX  |   
 +|  40  |  48  |  RD15  |  AN33/AETXD1/RPD15/SCK6/RD15  |  GPIO, U1TX  |   
 +|  41  |  28  |  RA09  |  VREF-/CVREF-/AN27/AERXD2/RA9  |  GPIO, VREF-  |   
 +|  42  |  29  |  RA10  |  VREF+/CVREF+/AN28/AERXD3/RA10  |  VREF+  |   
 +|  43  |  81  |  RD04  |  SQICS0/RPD4/RD4  |  USER_LED2  |   
 +|  44  |  35  |  RB11  |  AN6/ERXERR/AETXERR/RB11  |  USER_LED3  |   
 +|  45  |  1  |  RG15  |  AN23/AERXERR/RG15  |  USER_LED4  |   
 +|  46  |  2  |  RA05  |  EBIA5/AN34/PMA5/RA5  |  BTN1  |   
 +|  47  |  61  |  RA04  |  EBIA14/PMCS1/PMA14/RA4  |  BTN2  |   
 +|  48  |  42  |  RB13  |  AN8/ERXD1/AECOL/RB13  |  AIN12/POT  |   
 +|  49  |  41  |  RB12  |  EBIA11/AN7/ERXD0/AECRS/PMA11/RB12  |  AIN13/POWER SUPPLY MONITOR  |   
 +|  50  |  80  |  RD13  |  EBID13/ETXD3/PMD13/RD13  |  5V POWER ENABLE  |   
 +|  51  |  43  |  RB14  |  EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14  |  SD_SCK3  |   
 +|  52  |  8  |  RC03  |  EBIWE/AN20/RPC3/PMWR/RC3  |  SD_SS3  |   
 +|  53  |  34  |  RB10  |  EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10  |  SD_SDI3  |   
 +|  54  |  9  |  RC04  |  EBIOE/AN19/RPC4/PMRD/RC4  |  SD_SDO3  |   
 +|  55  |  69  |  RD10  |  RPD10/SCK4/RD10  |  MRF24_SCK4  |   
 +|  56  |  68  |  RD09  |  EBIA15/RPD9/PMCS2/PMA15/RD9  |  MRF24_SS4  |   
 +|  57  |  65  |  RF05  |  EBIA8/RPF5/SCL5/PMA8/RF5  |  MRF24_SDI4  |   
 +|  58  |  88  |  RG00  |  EBID8/RPG0/PMD8/RG0  |  MRF24 SDO4  |   
 +|  59  |  67  |  RA15  |  AETXEN/RPA15/SDA1/RA15  |  MRF24_INT4   |   
 +|  60  |  87  |  RG01  |  EBID9/ETXERR/RPG1/PMD9/RG1  |  MRF24_HIBERNATE  |   
 +|  61  |  64  |  RF04  |  EBIA9/RPF4/SDA5/PMA9/RF4  |  MRF24_RESET  |   
 +|  62  |  38  |  RA01  |  TCK/EBIA19/AN29/RA1  |  TCK  |   
 +|  63  |  17  |  RA00  |  TMS/EBIA16/AN24/RA0  |  TMS  |   
 +|  64  |  40  |  RF12  |  TDO/EBIA17/AN31/RPF12/RF12  |  TDO  |   
 +|  65  |  39  |  RF13  |  TDI/EBIA18/AN30/RPF13/SCK5/RF13  |  TDI  |   
 +|  66  |  89  |  RA06  |  TRCLK/SQICLK/RA6  |  TRCLK  |   
 +|  67  |  97  |  RG13  |  TRD0/SQID0/RG13  |  TRD0  |   
 +|  68  |  96  |  RG12  |  TRD1/SQID1/RG12  |  TRD1  |   
 +|  69  |  95  |  RG14  |  TRD2/SQID2/RG14  |  TRD2  |   
 +|  70  |  90  |  RA07  |  TRD3/SQID3/RA7  |  TRD3  |   
 +|  N/A  |  13  |    |  VSS  |  POWER  |   
 +|  N/A  |  14  |    |  VDD  |  POWER  |   
 +|  N/A  |  15  |    |  MCLR  |  MCLR, ICSP  |   
 +|  N/A  |  26  |  RB06  |  PGEC2/AN46/RPB6/RB6  |  ICSP  |   
 +|  N/A  |  27  |  RB07  |  PGED2/AN47/RPB7/RB7  |  ICSP  |   
 +|  N/A  |  30  |    |  AVDD  |  POWER  |   
 +|  N/A  |  31  |    |  AVSS  |  POWER  |   
 +|  N/A  |  36  |    |  VSS  |  POWER  |   
 +|  N/A  |  37  |    |  VDD  |  POWER  |   
 +|  N/A  |  45  |    |  VSS  |  POWER  |   
 +|  N/A  |  46  |    |  VDD  |  POWER  |   
 +|  N/A  |  49  |  RC12  |  OSCI/CLKI/RC12  |  XTAL  |   
 +|  N/A  |  50  |  RC15  |  OSCO/CLKO/RC15  |  XTAL  |   
 +|  N/A  |  51  |    |  VBUS  |  POWER  |   
 +|  N/A  |  52  |    |  VUSB3V3  |  POWER  |   
 +|  N/A  |  53  |    |  VSS  |  POWER  |   
 +|  N/A  |  54  |    |  D-  |  PIC32_USBD-  |   
 +|  N/A  |  55  |    |  D+  |  PIC32_USBD+  |   
 +|  N/A  |  56  |  RF03  |  USBID/RPF3/RF3  |  PIC32_USBID  |   
 +|  N/A  |  62  |    |  VDD  |  POWER  |   
 +|  N/A  |  63  |    |  VSS  |  POWER  |   
 +|  N/A  |  72  |  RC13  |  SOSCI/RPC13/RC13  |  SOSC XTAL  |   
 +|  N/A  |  73  |  RC14  |  SOSCO/RPC14/T1CK/RC14  |  SOSC XTAL  |   
 +|  N/A  |  74  |    |  VDD  |  POWER  |   
 +|  N/A  |  75  |    |  VSS  |  POWER  |   
 +|  N/A  |  83  |    |  VDD  |  POWER  |   
 +|  N/A  |  84  |    |  VSS  |  POWER  |   
 +|  N/A  |  92  |    |  VSS  |  POWER  |   
 +|  N/A  |  93  |    |  VDD  |  POWER  |  
  
-^  Digital Pin #  ^  Connector Pin #  ^  Microcontroller Pin Label  | +==== 13.2: Pinout Table by MCU Pin and Port Bit Numbers ==== 
-|  0  |  J6-1  |  EBIRDY3/RPF2/SDA3/RF2  | +^  Port Bit  ^  Digilent Pin #  ^  MCU Pin  ^  PIC32 Signal Name  ^  Function  ^ 
-|  1  |  J6-3  |  EBIRDY2/RPF8/SCL3/RF8  | +|  RA00  |  63  |  17  |  TMS/EBIA16/AN24/RA0  |  TMS  |   
-|  2  |  J6-5  |  AN25/AERXD0/RPE8/RE8  | +|  RA01  |  62  |  38  |  TCK/EBIA19/AN29/RA1  |  TCK  |   
-|  3  |  J6-7  |  EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0  | +|  RA02  |  37  |  59  |  EBICS0/SCL2/RA2  |  GPIO  |   
-|  4  |  J6-9  |  EBIRDY1/SDA2/RA3  | +|  RA03  |  4  |  60  |  EBIRDY1/SDA2/RA3  |  GPIO  |   
-|  5  |  J6-11  |  RPD1/SCK1/RD1  | +|  RA04  |  47  |  61  |  EBIA14/PMCS1/PMA14/RA4  |  BTN2  |   
-|  6  |  J6-13  |  EBID14/ETXEN/RPD2/PMD14/RD2  | +|  RA05  |  46  |  2  |  EBIA5/AN34/PMA5/RA5  |  BTN1  |   
-|  7  |  J6-15  |  AN26/AERXD1/RPE9/RE9  | +|  RA06  |  66  |  89  |  TRCLK/SQICLK/RA6  |  TRCLK  |   
-|  8  |  J5-1  |  AETXCLK/RPA14/SCL1/RA14  | +|  RA07  |  70  |  90  |  TRD3/SQID3/RA7  |  TRD3  |   
-|  9  |  J5-3  |  EBID15/ETXCLK/RPD3/PMD15/RD3  | +|  RA09  |  41  |  28  |  VREF-/CVREF-/AN27/AERXD2/RA9  |  GPIO, VREF-  |   
-|  10  |  J5-5, J8-5  |  EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9  | +|  RA10  |  42  |  29  |  VREF+/CVREF+/AN28/AERXD3/RA10  |  VREF+  |   
-|  11  |  J5-7, J8-4  |  EMDC/AEMDC/RPD11/RD11  | +|  RA14  |  8  |  66  |  AETXCLK/RPA14/SCL1/RA14  |  GPIO, IC3, INT3  |   
-|  12  |  J5-9, J8-1  |  EBID11/ETXD1/RPF0/PMD11/RF0  | +|  RA15  |  59  |  67  |  AETXEN/RPA15/SDA1/RA15  |  MRF24_INT4   |   
-|  13  |  J5-11, J8-3, LD1  |  AN14/C1IND/ECOL/RPG6/SCK2/RG6  | +|  RB00  |  25  |  25  |  PGED1/AN0/RPB0/RB0  |  AIN11, GPIO, P32_VBUSON  |   
-|  14  |  J7-1  |  AN45/C1INA/RPB5/RB5  | +|  RB01  |  23  |  24  |  PGEC1/AN1/RPB1/RB1  |  AIN9, GPIO  |   
-|  15  |  J7-3  |  EBIA7/AN49/RPB9/PMA7/RB9  | +|  RB02  |  21  |  23  |  AN2/C2INB/RPB2/RB2  |  AIN7, GPIO  |   
-|  16  |  J7-5  |  EBIA12/AN21/RPC2/PMA12/RC2  | +|  RB03  |  20  |  22  |  AN3/C2INA/RPB3/RB3  |  AIN6, GPIO  |   
-|  17  |  J7-7  |  EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15  | +|  RB04  |  22  |  21  |  AN4/C1INB/RB4  |  AIN8, GPIO  |   
-|  18  |  J7-9, J4-1  |  EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7  | +|  RB05  |  14  |  20  |  AN45/C1INA/RPB5/RB5  |  AIN0, GPIO  |   
-|  19  |  J7-11, J4-2  |  EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8  | +|  RB06  |  N/A  |  26  |  PGEC2/AN46/RPB6/RB6  |  ICSP  |   
-|  20  |  J7-2  |  AN3/C2INA/RPB3/RB3  | +|  RB07  |  N/A  |  27  |  PGED2/AN47/RPB7/RB7  |  ICSP  |   
-|  21  |  J7-4  |  AN2/C2INB/RPB2/RB2  | +|  RB08  |  24  |  32  |  EBIA10/AN48/RPB8/PMA10/RB8  |  AIN10, GPIO  |   
-|  22  |  J7-6  |  AN4/C1INB/RB4  | +|  RB09  |  15  |  33  |  EBIA7/AN49/RPB9/PMA7/RB9  |  AIN1, GPIO  |   
-|  23  |  J7-8  |  PGEC1/AN1/RPB1/RB1  | +|  RB10  |  53  |  34  |  EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10  |  SD_SDI3  |   
-|  24  |  J7-10  |  EBIA10/AN48/RPB8/PMA10/RB8  | +|  RB11  |  44  |  35  |  AN6/ERXERR/AETXERR/RB11  |  USER_LED3  |   
-|  25  |  J7-12  |  PGED1/AN0/RPB0/RB0  | +|  RB12  |  49  |  41  |  EBIA11/AN7/ERXD0/AECRS/PMA11/RB12  |  AIN13/POWER SUPPLY MONITOR  |   
-|  26  |  J6-2  |  EBID0/PMD0/RE0  | +|  RB13  |  48  |  42  |  AN8/ERXD1/AECOL/RB13  |  AIN12/POT  |   
-|  27  |  J6-4  |  EBID1/PMD1/RE1  | +|  RB14  |  51  |  43  |  EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14  |  SD_SCK3  |   
-|  28  |  J6-6  |  EBID2/PMD2/RE2  | +|  RB15  |  17  |  44  |  EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15  |  AIN3, GPIO  |   
-|  29  |  J6-8  |  EBID3/RPE3/PMD3/RE3  | +|  RC01  |  35  |  6  |  EBIA6/AN22/RPC1/PMA6/RC1  |  GPIO, T2CK, IC7  |   
-|  30  |  J6-10  |  EBID4/AN18/PMD4/RE4  | +|  RC02  |  16  |  7  |  EBIA12/AN21/RPC2/PMA12/RC2  |  AIN2, GPIO  |   
-|  31  |  J6-12  |  EBID5/AN17/RPE5/PMD5/RE5  | +|  RC03  |  52  |  8  |  EBIWE/AN20/RPC3/PMWR/RC3  |  SD_SS3  |   
-|  32  |  J6-14  |  EBID6/AN16/PMD6/RE6  | +|  RC04  |  54  |  9  |  EBIOE/AN19/RPC4/PMRD/RC4  |  SD_SDO3  |   
-|  33  |  J6-16  |  EBID7/AN15/PMD7/RE7  | +|  RC12  |  N/A  |  49  |  OSCI/CLKI/RC12  |  XTAL  |   
-|  34  |  J5-2  |  SQICS1/RPD5/RD5  | +|  RC13  |  N/A  |  72  |  SOSCI/RPC13/RC13  |  SOSC XTAL  |   
-|  35  |  J5-4  |  EBIA6/AN22/RPC1/PMA6/RC1  | +|  RC14  |  N/A  |  73  |  SOSCO/RPC14/T1CK/RC14  |  SOSC XTAL  |   
-|  36  |  J5-6  |  EBID10/ETXD0/RPF1/PMD10/RF1  | +|  RC15  |  N/A  |  50  |  OSCO/CLKO/RC15  |  XTAL  |   
-|  37  |  J5-8  |  EBICS0/SCL2/RA2  | +|  RD00  |  3  |  71  |  EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0  |  PWM 1, INT0, OC1  |   
-|  38  |  J5-10  |  EBID12/ETXD2/RPD12/PMD12/RD12  | +|  RD01  |  5  |  76  |  RPD1/SCK1/RD1  |  PWM 2, OC2  |   
-|  39  |  J5-12  |  AN32/AETXD0/RPD14/RD14  | +|  RD02  |  6  |  77  |  EBID14/ETXEN/RPD2/PMD14/RD2  |  PWM 3, OC3  |   
-|  40  |  J5-14  |  AN33/AETXD1/RPD15/SCK6/RD15  | +|  RD03  |  9  |  78  |  EBID15/ETXCLK/RPD3/PMD15/RD3  |  PWM 4, OC4  |   
-|  41  |  J5-16  |  VREF-/CVREF-/AN27/AERXD2/RA9  | +|  RD04  |  43  |  81  |  SQICS0/RPD4/RD4  |  USER_LED2  |   
-|  42  |    |  VREF+/CVREF+/AN28/AERXD3/RA10  | +|  RD05  |  34  |  82  |  SQICS1/RPD5/RD5  |  GPIO, T4CK  |   
-|  43  |  LD2  |  SQICS0/RPD4/RD4  | +|  RD09  |  56  |  68  |  EBIA15/RPD9/PMCS2/PMA15/RD9  |  MRF24_SS4  |   
-|  44  |  LD3  |  AN6/ERXERR/AETXERR/RB11  | +|  RD10  |  55  |  69  |  RPD10/SCK4/RD10  |  MRF24_SCK4  |   
-|  45  |  LD4  |  AN23/AERXERR/RG15  | +|  RD11  |  11  |  70  |  EMDC/AEMDC/RPD11/RD11  |  SPI_SDO2/SDI2 PWM 6, OC7  |   
-|  46  |  BTN1  |  EBIA5/AN34/PMA5/RA5  | +|  RD12  |  38  |  79  |  EBID12/ETXD2/RPD12/PMD12/RD12  |  GPIO, T3Ck  |   
-|  47  |  BTN2  |  EBIA14/PMCS1/PMA14/RA4  | +|  RD13  |  50  |  80  |  EBID13/ETXD3/PMD13/RD13  |  5V POWER ENABLE  |   
-|  48  |    |  AN8/ERXD1/AECOL/RB13  | +|  RD14  |  39  |  47  |  AN32/AETXD0/RPD14/RD14  |  GPIO, U1RX  |   
-|  49  |    |  EBIA11/AN7/ERXD0/AECRS/PMA11/RB12  | +|  RD15  |  40  |  48  |  AN33/AETXD1/RPD15/SCK6/RD15  |  GPIO, U1TX  |   
-|  50  |  J15-5  |  EBID13/ETXD3/PMD13/RD13  | +|  RE00  |  26  |  91  |  EBID0/PMD0/RE0  |  GPIO  |   
-|  51  |    |  EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14  | +|  RE01  |  27  |  94  |  EBID1/PMD1/RE1  |  GPIO  |   
-|  52  |    |  EBIWE/AN20/RPC3/PMWR/RC3  | +|  RE02  |  28  |  98  |  EBID2/PMD2/RE2  |  GPIO  |   
-|  53  |    |  EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10  | +|  RE03  |  29  |  99  |  EBID3/RPE3/PMD3/RE3  |  GPIO  |   
-|  54  |    |  EBIOE/AN19/RPC4/PMRD/RC4  | +|  RE04  |  30  |  100  |  EBID4/AN18/PMD4/RE4  |  GPIO  |   
-|  55  |    |  RPD10/SCK4/RD10  | +|  RE05  |  31  |  3  |  EBID5/AN17/RPE5/PMD5/RE5  |  GPIO  |   
-|  56  |    |  EBIA15/RPD9/PMCS2/PMA15/RD9  | +|  RE06  |  32  |  4  |  EBID6/AN16/PMD6/RE6  |  GPIO  |   
-|  57  |    |  EBIA8/RPF5/SCL5/PMA8/RF5  | +|  RE07  |  33  |  5  |  EBID7/AN15/PMD7/RE7  |  GPIO  |   
-|  58  |    |  EBID8/RPG0/PMD8/RG0  | +|  RE08  |  2  |  18  |  AN25/AERXD0/RPE8/RE8  |  GPIO, IC1, INT1  |   
-|  59  |    |  AETXEN/RPA15/SDA1/RA15  | +|  RE09  |  7  |  19  |  AN26/AERXD1/RPE9/RE9  |  GPIO, IC2,  INT2  |   
-|  60  |    |  EBID9/ETXERR/RPG1/PMD9/RG1  | +|  RF00  |  12  |  85  |  EBID11/ETXD1/RPF0/PMD11/RF0  |  SPI_SDI2/SDO2, T5CK(+)  |   
-|  61  |    |  EBIA9/RPF4/SDA5/PMA9/RF4  | +|  RF01  |  36  |  86  |  EBID10/ETXD0/RPF1/PMD10/RF1  |  GPIO, T6CK  |   
-|  62  |    |  TCK/EBIA19/AN29/RA1  | +|  RF02  |  0  |  57  |  EBIRDY3/RPF2/SDA3/RF2  |  GPIO, U4RX  |   
-|  63  |    |  TMS/EBIA16/AN24/RA0  | +|  RF03  |  N/A  |  56  |  USBID/RPF3/RF3  |  PIC32_USBID  |   
-|  64  |    |  TDO/EBIA17/AN31/RPF12/RF12  | +|  RF04  |  61  |  64  |  EBIA9/RPF4/SDA5/PMA9/RF4  |  MRF24_RESET  |   
-|  65  |    |  TDI/EBIA18/AN30/RPF13/SCK5/RF13  | +|  RF05  |  57  |  65  |  EBIA8/RPF5/SCL5/PMA8/RF5  |  MRF24_SDI4  |   
-|  66  |    |  TRCLK/SQICLK/RA6  | +|  RF08  |  1  |  58  |  EBIRDY2/RPF8/SCL3/RF8  |  GPIO, U4TX  |   
-|  67  |    |  TRD0/SQID0/RG13  | +|  RF12  |  64  |  40  |  TDO/EBIA17/AN31/RPF12/RF12  |  TDO  |   
-|  68  |    |  TRD1/SQID1/RG12  | +|  RF13  |  65  |  39  |  TDI/EBIA18/AN30/RPF13/SCK5/RF13  |  TDI  |   
-|  69  |    |  TRD2/SQID2/RG14  | +|  RG00  |  58  |  88  |  EBID8/RPG0/PMD8/RG0  |  MRF24 SDO4  |   
-|  70  |    |  TRD3/SQID3/RA7  |+|  RG01  |  60  |  87  |  EBID9/ETXERR/RPG1/PMD9/RG1  |  MRF24_HIBERNATE  |   
 +|  RG06  |  13  |  10  |  AN14/C1IND/ECOL/RPG6/SCK2/RG6  |  SPI_SCK2, USER LED1  |   
 +|  RG07  |  18  |  11  |  EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7  |  AIN4, SDA  |   
 +|  RG08  |  19  |  12  |  EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8  |  AIN5, SCL  |   
 +|  RG09  |  10  |  16  |  EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9  |  SPI_SS2, PWM 5, OC9, IC6  |   
 +|  RG12  |  68  |  96  |  TRD1/SQID1/RG12  |  TRD1  |   
 +|  RG13  |  67  |  97  |  TRD0/SQID0/RG13  |  TRD0  |   
 +|  RG14  |  69  |  95  |  TRD2/SQID2/RG14  |  TRD2  |   
 +|  RG15  |  45  |  1  |  AN23/AERXERR/RG15  |  USER_LED4  |   
 +|    |  N/A  |  13  |  VSS  |  POWER  |   
 +|    |  N/A  |  14  |  VDD  |  POWER  |   
 +|    |  N/A  |  15  |  MCLR  |  MCLR, ICSP  |   
 +|    |  N/A  |  30  |  AVDD  |  POWER  |   
 +|    |  N/A  |  31  |  AVSS  |  POWER  |   
 +|    |  N/A  |  36  |  VSS  |  POWER  |   
 +|    |  N/A  |  37  |  VDD  |  POWER  |   
 +|    |  N/A  |  45  |  VSS  |  POWER  |   
 +|    |  N/A  |  46  |  VDD  |  POWER  |   
 +|    |  N/A  |  51  |  VBUS  |  POWER  |   
 +|    |  N/A  |  52  |  VUSB3V3  |  POWER  |   
 +|    |  N/A  |  53  |  VSS  |  POWER  |   
 +|    |  N/A  |  54  |  D-  |  PIC32_USBD-  |   
 +|    |  N/A  |  55  |  D+  |  PIC32_USBD+  |   
 +|    |  N/A  |  62  |  VDD  |  POWER  |   
 +|    |  N/A  |  63  |  VSS  |  POWER  |   
 +|    |  N/A  |  74  |  VDD  |  POWER  |   
 +|    |  N/A  |  75  |  VSS  |  POWER  |   
 +|    |  N/A  |  83  |  VDD  |  POWER  |   
 +|    |  N/A  |  84  |  VSS  |  POWER  |   
 +|    |  N/A  |  92  |  VSS  |  POWER  |   
 +|    |  N/A  |  93  |  VDD  |  POWER  |  
  
-====12.2: Pinout Table by Different sort of Number==== +==== 13.3: Pinout Table by PIC32 Microcontroller Pin ==== 
-FIXME FIXME FIXME !!!+^  MCU Pin  ^  Port Bit  ^  Digilent Pin #  ^  PIC32 Signal Name                                                ^  Function                    ^ 
 +|  1        |  RG15      |  45              |  AN23/AERXERR/RG15                                                |  USER_LED4                   | 
 +|  2        |  RA05      |  46              |  EBIA5/AN34/PMA5/RA5                                              |  BTN1                        | 
 +|  3        |  RE05      |  31              |  EBID5/AN17/RPE5/PMD5/RE5                                         |  GPIO                        | 
 +|  4        |  RE06      |  32              |  EBID6/AN16/PMD6/RE6                                              |  GPIO                        | 
 +|  5        |  RE07      |  33              |  EBID7/AN15/PMD7/RE7                                              |  GPIO                        | 
 +|  6        |  RC01      |  35              |  EBIA6/AN22/RPC1/PMA6/RC1                                         |  GPIO, T2CK, IC7             | 
 +|  7        |  RC02      |  16              |  EBIA12/AN21/RPC2/PMA12/RC2                                       |  AIN2, GPIO                  | 
 +|  8        |  RC03      |  52              |  EBIWE/AN20/RPC3/PMWR/RC3                                         |  SD_SS3                      | 
 +|  9        |  RC04      |  54              |  EBIOE/AN19/RPC4/PMRD/RC4                                         |  SD_SDO3                     | 
 +|  10       |  RG06      |  13              |  AN14/C1IND/ECOL/RPG6/SCK2/RG6                                    |  SPI_SCK2, USER LED1         | 
 +|  11       |  RG07      |  18              |  EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7                         |  AIN4, SDA                   | 
 +|  12       |  RG08      |  19              |  EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSDV/RPG8/SCL4/PMA3/RG8  |  AIN5, SCL                   | 
 +|  13       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  14       |            |  N/A             |  VDD                                                              |  POWER                       | 
 +|  15       |            |  N/A             |  MCLR                                                             |  MCLR, ICSP                  | 
 +|  16       |  RG09      |  10              |  EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREFCLK/RPG9/PMA2/RG9   |  SPI_SS2, PWM 5, OC9, IC6    | 
 +|  17       |  RA00      |  63              |  TMS/EBIA16/AN24/RA0                                              |  TMS                         | 
 +|  18       |  RE08      |  2               |  AN25/AERXD0/RPE8/RE8                                             |  GPIO, IC1, INT1             | 
 +|  19       |  RE09      |  7               |  AN26/AERXD1/RPE9/RE9                                             |  GPIO, IC2,  INT2            | 
 +|  20       |  RB05      |  14              |  AN45/C1INA/RPB5/RB5                                              |  AIN0, GPIO                  | 
 +|  21       |  RB04      |  22              |  AN4/C1INB/RB4                                                    |  AIN8, GPIO                  | 
 +|  22       |  RB03      |  20              |  AN3/C2INA/RPB3/RB3                                               |  AIN6, GPIO                  | 
 +|  23       |  RB02      |  21              |  AN2/C2INB/RPB2/RB2                                               |  AIN7, GPIO                  | 
 +|  24       |  RB01      |  23              |  PGEC1/AN1/RPB1/RB1                                               |  AIN9, GPIO                  | 
 +|  25       |  RB00      |  25              |  PGED1/AN0/RPB0/RB0                                               |  AIN11, GPIO, P32_VBUSON     | 
 +|  26       |  RB06      |  N/A             |  PGEC2/AN46/RPB6/RB6                                              |  ICSP                        | 
 +|  27       |  RB07      |  N/A             |  PGED2/AN47/RPB7/RB7                                              |  ICSP                        | 
 +|  28       |  RA09      |  41              |  VREF-/CVREF-/AN27/AERXD2/RA9                                     |  GPIO, VREF-                 | 
 +|  29       |  RA10      |  42              |  VREF+/CVREF+/AN28/AERXD3/RA10                                    |  VREF+                       | 
 +|  30       |            |  N/A             |  AVDD                                                             |  POWER                       | 
 +|  31       |            |  N/A             |  AVSS                                                             |  POWER                       | 
 +|  32       |  RB08      |  24              |  EBIA10/AN48/RPB8/PMA10/RB8                                       |  AIN10, GPIO                 | 
 +|  33       |  RB09      |  15              |  EBIA7/AN49/RPB9/PMA7/RB9                                         |  AIN1, GPIO                  | 
 +|  34       |  RB10      |  53              |  EBIA13/CVREFOUT/AN5/RPB10/PMA13/RB10                             |  SD_SDI3                     | 
 +|  35       |  RB11      |  44              |  AN6/ERXERR/AETXERR/RB11                                          |  USER_LED3                   | 
 +|  36       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  37       |            |  N/A             |  VDD                                                              |  POWER                       | 
 +|  38       |  RA01      |  62              |  TCK/EBIA19/AN29/RA1                                              |  TCK                         | 
 +|  39       |  RF13      |  65              |  TDI/EBIA18/AN30/RPF13/SCK5/RF13                                  |  TDI                         | 
 +|  40       |  RF12      |  64              |  TDO/EBIA17/AN31/RPF12/RF12                                       |  TDO                         | 
 +|  41       |  RB12      |  49              |  EBIA11/AN7/ERXD0/AECRS/PMA11/RB12                                |  AIN13/POWER SUPPLY MONITOR  | 
 +|  42       |  RB13      |  48              |  AN8/ERXD1/AECOL/RB13                                             |  AIN12/POT                   | 
 +|  43       |  RB14      |  51              |  EBIA1/AN9/ERXD2/AETXD3/RPB14/SCK3/PMA1/RB14                      |  SD_SCK3                     | 
 +|  44       |  RB15      |  17              |  EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB15                     |  AIN3, GPIO                  | 
 +|  45       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  46       |            |  N/A             |  VDD                                                              |  POWER                       | 
 +|  47       |  RD14      |  39              |  AN32/AETXD0/RPD14/RD14                                           |  GPIO, U1RX                  | 
 +|  48       |  RD15      |  40              |  AN33/AETXD1/RPD15/SCK6/RD15                                      |  GPIO, U1TX                  | 
 +|  49       |  RC12      |  N/A             |  OSCI/CLKI/RC12                                                   |  XTAL                        | 
 +|  50       |            |  N/A             |  OSCO/CLKO/RC15                                                   |  XTAL                        | 
 +|  51       |            |  N/A             |  VBUS                                                             |  POWER                       | 
 +|  52       |            |  N/A             |  VUSB3V3                                                          |  POWER                       | 
 +|  53       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  54       |            |  N/A             |  D-                                                               |  PIC32_USBD-                 | 
 +|  55       |            |  N/A             |  D+                                                               |  PIC32_USBD+                 | 
 +|  56       |  RF03      |  N/A             |  USBID/RPF3/RF3                                                   |  PIC32_USBID                 | 
 +|  57       |  RF02      |  0               |  EBIRDY3/RPF2/SDA3/RF2                                            |  GPIO, U4RX                  | 
 +|  58       |  RF08      |  1               |  EBIRDY2/RPF8/SCL3/RF8                                            |  GPIO, U4TX                  | 
 +|  59       |  RA02      |  37              |  EBICS0/SCL2/RA2                                                  |  GPIO                        | 
 +|  60       |  RA03      |  4               |  EBIRDY1/SDA2/RA3                                                 |  GPIO                        | 
 +|  61       |  RA04      |  47              |  EBIA14/PMCS1/PMA14/RA4                                           |  BTN2                        | 
 +|  62       |            |  N/A             |  VDD                                                              |  POWER                       | 
 +|  63       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  64       |  RF04      |  61              |  EBIA9/RPF4/SDA5/PMA9/RF4                                         |  MRF24_RESET                 | 
 +|  65       |  RF05      |  57              |  EBIA8/RPF5/SCL5/PMA8/RF5                                         |  MRF24_SDI4                  | 
 +|  66       |  RA14      |  8               |  AETXCLK/RPA14/SCL1/RA14                                          |  GPIO, IC3, INT3             | 
 +|  67       |  RA15      |  59              |  AETXEN/RPA15/SDA1/RA15                                           |  MRF24_INT4                  | 
 +|  68       |  RD09      |  56              |  EBIA15/RPD9/PMCS2/PMA15/RD9                                      |  MRF24_SS4                   | 
 +|  69       |  RD10      |  55              |  RPD10/SCK4/RD10                                                  |  MRF24_SCK4                  | 
 +|  70       |  RD11      |  11              |  EMDC/AEMDC/RPD11/RD11                                            |  SPI_SDO2/SDI2 PWM 6, OC7    | 
 +|  71       |  RD00      |  3               |  EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0                                  |  PWM 1, INT0, OC1            | 
 +|  72       |  RC13      |  N/A             |  SOSCI/RPC13/RC13                                                 |  SOSC XTAL                   | 
 +|  73       |  RC14      |  N/A             |  SOSCO/RPC14/T1CK/RC14                                            |  SOSC XTAL                   | 
 +|  74       |            |  N/A             |  VDD                                                              |  POWER                       | 
 +|  75       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  76       |  RD01      |  5               |  RPD1/SCK1/RD1                                                    |  PWM 2, OC2                  | 
 +|  77       |  RD02      |  6               |  EBID14/ETXEN/RPD2/PMD14/RD2                                      |  PWM 3, OC3                  | 
 +|  78       |  RD03      |  9               |  EBID15/ETXCLK/RPD3/PMD15/RD3                                     |  PWM 4, OC4                  | 
 +|  79       |  RD12      |  38              |  EBID12/ETXD2/RPD12/PMD12/RD12                                    |  GPIO, T3Ck                  | 
 +|  80       |  RD13      |  50              |  EBID13/ETXD3/PMD13/RD13                                          |  5V POWER ENABLE             | 
 +|  81       |  RD04      |  43              |  SQICS0/RPD4/RD4                                                  |  USER_LED2                   | 
 +|  82       |  RD05      |  34              |  SQICS1/RPD5/RD5                                                  |  GPIO, T4CK                  | 
 +|  83       |            |  N/A             |  VDD                                                              |  POWER                       | 
 +|  84       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  85       |  RF00      |  12              |  EBID11/ETXD1/RPF0/PMD11/RF0                                      |  SPI_SDI2/SDO2, T5CK(+)      | 
 +|  86       |  RF01      |  36              |  EBID10/ETXD0/RPF1/PMD10/RF1                                      |  GPIO, T6CK                  | 
 +|  87       |  RG01      |  60              |  EBID9/ETXERR/RPG1/PMD9/RG1                                       |  MRF24_HIBERNATE             | 
 +|  88       |  RG00      |  58              |  EBID8/RPG0/PMD8/RG0                                              |  MRF24 SDO4                  | 
 +|  89       |  RA06      |  66              |  TRCLK/SQICLK/RA6                                                 |  TRCLK                       | 
 +|  90       |  RA07      |  70              |  TRD3/SQID3/RA7                                                   |  TRD3                        | 
 +|  91       |  RE00      |  26              |  EBID0/PMD0/RE0                                                   |  GPIO                        | 
 +|  92       |            |  N/A             |  VSS                                                              |  POWER                       | 
 +|  93       |            |  N/A             |  VDD                                                              |  POWER                       | 
 +|  94       |  RE01      |  27              |  EBID1/PMD1/RE1                                                   |  GPIO                        | 
 +|  95       |  RG14      |  69              |  TRD2/SQID2/RG14                                                  |  TRD2                        | 
 +|  96       |  RG12      |  68              |  TRD1/SQID1/RG12                                                  |  TRD1                        | 
 +|  97       |  RG13      |  67              |  TRD0/SQID0/RG13                                                  |  TRD0                        | 
 +|  98       |  RE02      |  28              |  EBID2/PMD2/RE2                                                   |  GPIO                        | 
 +|  99       |  RE03      |  29              |  EBID3/RPE3/PMD3/RE3                                              |  GPIO                        | 
 +|  100      |  RE04      |  30              |  EBID4/AN18/PMD4/RE4                                              |  GPIO                        |