Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
chipkit_shield_network:refmanual [2015/05/28 18:13] – [Overview] Marthachipkit_shield_network:refmanual [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== chipKIT™ Network Shield™ ====== +====== chipKIT™ Network Shield™ Reference Manual======
-====== Reference Manual ====== +
 **Revision:** August 27, 2013 **Revision:** August 27, 2013
  
Line 7: Line 5:
  
  
-===== Overview =====+====== Overview ======
  
 The chipKIT Network Shield is an input/output The chipKIT Network Shield is an input/output
Line 57: Line 55:
 ---- ----
  
-===== chipKIT Network Shield Hardware Overview =====+====== 1. chipKIT Network Shield Hardware Overview ======
  
 The Network Shield has the following hardware features: The Network Shield has the following hardware features:
Line 125: Line 123:
  
  
-===== chipKIT Network Shield Hardware Description =====+====== 2. chipKIT Network Shield Hardware Description ======
  
- 
-==== Introduction ==== 
  
 The following describes the hardware on the The following describes the hardware on the
Line 143: Line 139:
  
  
-==== Ethernet Interface ====+===== 2.1. Ethernet Interface =====
  
 The Network Shield can interface with 10Mbps The Network Shield can interface with 10Mbps
Line 271: Line 267:
  
  
-==== USB Interface ====+===== 2.2. USB Interface =====
  
  
Line 430: Line 426:
  
  
-==== CAN Interfaces ====+===== 2.3. CAN Interfaces =====
  
  
Line 521: Line 517:
 the termination resistors and jumpers to the termination resistors and jumpers to
 enable/disable them depending on the location enable/disable them depending on the location
-of the board in the network. Jumper JP6 is+of the board in the network. Jumper JP2 is
 used to enable/disable the termination resistor used to enable/disable the termination resistor
-for the CAN1 network, and JP8 is used to+for the CAN1 network, and JP7 is used to
 enable/disable the termination resistor for enable/disable the termination resistor for
 CAN2. Install a shorting block on the jumper CAN2. Install a shorting block on the jumper
Line 531: Line 527:
  
  
-==== I2C Busses and Connectors ====+===== 2.4. I2C Busses and Connectors =====
  
  
Line 636: Line 632:
  
  
-==== EEPROM ====+==== 2.4.1. EEPROM ====
  
  
Line 657: Line 653:
  
  
-==== 32.768KHz Oscillator ====+===== 2.5. 32.768KHz Oscillator =====
  
  
Line 673: Line 669:
 to clock the RTCC in the PIC32 to clock the RTCC in the PIC32
 microcontroller. microcontroller.
 +
 +
 +----
  
  
  
  
-===== Appendix A: chipKIT Network Shield Pinout Tables ===== +====== Appendix A: chipKIT Network Shield Pinout Tables ====== 
-==== Pins Used by the Ethernet Interface ====+===== Pins Used by the Ethernet Interface =====
 ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin     ^ Signal                                                           ^ Notes    ^ ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin     ^ Signal                                                           ^ Notes    ^
 | 46             | 88           | J10-8   | C1TX/ETXD0/PMD10/RF1                                             | ETXD0    | | 46             | 88           | J10-8   | C1TX/ETXD0/PMD10/RF1                                             | ETXD0    |
Line 693: Line 692:
  
  
-==== Pins Used by the USB Interface ====+===== Pins Used by the USB Interface =====
  
 ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin     ^ Signal                    ^ Notes  ^ ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin     ^ Signal                    ^ Notes  ^
Line 703: Line 702:
  
  
-==== Pins Useb by CAN Interfaces ====+===== Pins Used by CAN Interfaces =====
  
 ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin     ^ Signal                         ^ Notes  ^ ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin     ^ Signal                         ^ Notes  ^
Line 712: Line 711:
  
  
-==== Pins Used by I2C Interfaces ====+===== Pins Used by I2C Interfaces =====
  
 ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin                       ^ Signal                  ^ Notes                              ^ ^ chipKIT Pin #  ^ PIC32 Pin #  ^ Pin                       ^ Signal                  ^ Notes                              ^