Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
basys3:xadcdemo [2015/12/10 23:59] – Thomas Kappenmanbasys3:xadcdemo [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 57: Line 57:
  
 ===Software=== ===Software===
-  * **Vivado Design Suite 2015.1** +  * **Vivado Design Suite 2015.X** 
     * //Newer/older versions can be used, but the procedure may vary slightly//     * //Newer/older versions can be used, but the procedure may vary slightly//
  
Line 71: Line 71:
 ==== 1. Generate the Project ==== ==== 1. Generate the Project ====
  
->1.1)Download the repository seen above and place it in the location of your choosing.  +>1.1) Download the repository linked in the download section and place it in the location of your choosing.  
-> + 
->1.2)Generate the project by following this guide before continuing: [[vivado:github|How to Generate a Project from Digilent's Github]]+>1.2) Generate the **XADC** project in the Projects folder by following this guide before continuing: [[vivado:github|How to Generate a Project from Digilent's Github]]
  
 ==== 2. Build the Project ==== ==== 2. Build the Project ====
  
->2.1.) Click **Generate Bitstream** on the left hand menu towards the bottom. Vivado will run through both Run Synthesis and Run Implementation before it generates the bitstream automatically. +>2.1) Click **Generate Bitstream** on the left hand menu towards the bottom. Vivado will run through both Run Synthesis and Run Implementation before it generates the bitstream automatically. 
 > >
 >Note: If you want, you can click each step by itself in the order of **Run Synthesis**, **Run Implementation** and then **Generate Bitstream**. >Note: If you want, you can click each step by itself in the order of **Run Synthesis**, **Run Implementation** and then **Generate Bitstream**.
Line 85: Line 85:
 ==== 3. Program the Board ==== ==== 3. Program the Board ====
  
->3.1.) Once you have generated your bit file, Click on the hardware manager and connect to your board by choosing the local server option.+>3.1) Once you have generated your bit file, Click on the hardware manager and connect to your board by choosing the local server option.
 > >
 >{{:basys3:device_connected.png?600|}} >{{:basys3:device_connected.png?600|}}
  
->3.2.) Click program to load the project onto your Basys3.+>3.2) Click program to load the project onto your Basys3.
  
 ==== 4. Run the Project ==== ==== 4. Run the Project ====
Line 95: Line 95:
 This portion will help you run the demo and observe all its features. This portion will help you run the demo and observe all its features.
  
->4.1 Applying a voltage to the XADC port+>4.1) Applying a voltage to the XADC port
 > >
 >For this demo, the AD6, 7, 14 and 15  pins are used on the JXADC header. We hooked up a signal generator to our pins. All of the other pins were grounded to avoid coupling. >For this demo, the AD6, 7, 14 and 15  pins are used on the JXADC header. We hooked up a signal generator to our pins. All of the other pins were grounded to avoid coupling.