Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
basys3:xadcdemo [2015/06/25 22:14] – [Description] Sam Lowebasys3:xadcdemo [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 2: Line 2:
 ====== Basys3 XADC Demo ====== ====== Basys3 XADC Demo ======
  
-{{ :basys3_overview.png?nolink |}}+{{:basys3:xadc4.jpg?500|}}
  
------ +===== Overview ===== 
-===== Features Used =====+==== Features Used ====
  
 |                                    ^ Not Used  ^ Used  ^ |                                    ^ Not Used  ^ Used  ^
Line 21: Line 21:
  
  
-===== Description =====+==== Description ====
  
 This simple XADC Demo project demonstrates a simple usage of the Basys3's  This simple XADC Demo project demonstrates a simple usage of the Basys3's 
Line 33: Line 33:
 ==== A Note About The XADC Port ==== ==== A Note About The XADC Port ====
  
-On the Basys 3, the XADC Pmod connector houses 4 differential analog pins. The corresponding XADC channels are  +On the Basys3, the XADC Pmod connector houses 4 differential analog pairs. The corresponding XADC channels are 6, 7, 14, and 15. Below is a picture of the pinout of the Pmod Header.
-===== How to Build and Program =====+
  
-You will need...\\+{{:basys3:xadcpinout1.png?300|}}
  
-1. Vivado installed on your computer\\ +The differential pairs are grouped by columns. Looking at the number above, 1 corresponds to XA1_P and XA1_N, column 2 routes to XA2_P and XA2_N, 3 routes to XA3_P and XA3_N, and 4 routes to XA4_P and XA4_N. Below is from the Basys3 schematics that will show the internal connections of these signals.
-2. Basys3 board from digilent\\ +
-3. Wires and a voltage to measure\\+
  
 +{{:basys3:basys3xadcinternal.png?400|}}
  
 +From the schematic we can see XA1 is connected to XADC channel 6, XA2 is connected to XADC channel 14, XA3 is connected to XADC channel 7, and XA4 is connected to XADC channel 15. 
  
-==== 1. Download the Project ====+-------
  
-Download the project zip file here. {{:basys3:basys3xadc.zip|}} Once you have downloaded the project, unzip it in the location of your choosing.+===== Prerequisites =====
  
 +===Skills===
 +  * **Basic familiarity with Vivado**
 +    *  //This experience can be found by walking through our "Getting Started with Vivado" guide//
  
-==== 2. Load the Vivado Project ====+===Hardware=== 
 +  * **Basys3 FPGA board** 
 +  * **Micro-USB cable**  
 +  * **Wires and a voltage to measure**
  
-In your now unzipped project, open the file basys3XADC.xpr. This should open your project in Vivado. +===Software=== 
 +  * **Vivado Design Suite 2015.X**  
 +    * //Newer/older versions can be used, but the procedure may vary slightly//
  
-{{:basys3:gpio_load.png?600|}}+-----
  
-==== 3. Synthesize, Implement and Generate Bitstream ====+===== Downloads =====
  
-To complete this step all that you need to do is click **Generate Bitstream** on the left hand menu towards the bottom. Vivado will run through both Run Synthesis and Run Implementation before it generates the bitstream automatically. If you want, you can click each step by itself in the order of **Run Synthesis**, **Run Implementation** and then **Generate Bitstream**.+Basys 3 Support Repository -- [[https://github.com/Digilent/Basys3/archive/master.zip|ZIP]] [[https://github.com/Digilent/Basys3|GIT Repo]]
  
-{{:basys3:buildflow.png?600|}}+------ 
 +===== How to...  =====
  
-==== 4. Connect and Program the Basys3 ====+==== 1. Generate the Project ====
  
-Once you have generated your bit file, Click on the hardware manager and connect to your board by choosing the local server option.+>1.1) Download the repository linked in the download section and place it in the location of your choosing. 
  
-{{:basys3:device_connected.png?600|}}+>1.2) Generate the **XADC** project in the Projects folder by following this guide before continuing: [[vivado:github|How to Generate a Project from Digilent's Github]]
  
-After your board is connected, just click program to load the XADC demo onto your Basys3.+==== 2. Build the Project ====
  
-===== Running the Basys3 XADC Demo =====+>2.1) Click **Generate Bitstream** on the left hand menu towards the bottom. Vivado will run through both Run Synthesis and Run Implementation before it generates the bitstream automatically.  
 +> 
 +>Note: If you want, you can click each step by itself in the order of **Run Synthesis**, **Run Implementation** and then **Generate Bitstream**. 
 +> 
 +>{{:basys3:buildflow.png?600|}}
  
-This portion will help you run the demo and observe all its features.+==== 3. Program the Board ====
  
-==== 1. Applying a voltage to the XADC port ====+>3.1) Once you have generated your bit file, Click on the hardware manager and connect to your board by choosing the local server option. 
 +> 
 +>{{:basys3:device_connected.png?600|}}
  
-For this demo, the AD6, 7, 14 and 15  pins are used on the JXADC header. We hooked up a signal generator to our pins. All of the other pins were grounded to avoid coupling.+>3.2) Click program to load the project onto your Basys3.
  
-{{:basys3:xadc3.jpg?300|}}{{:basys3:xadc4.jpg?300|}}+==== 4. Run the Project ====
  
 +This portion will help you run the demo and observe all its features.
  
-==== 2. Seven Segment Display and LEDs ====+>4.1) Applying a voltage to the XADC port 
 +> 
 +>For this demo, the AD6, 7, 14 and 15  pins are used on the JXADC header. We hooked up a signal generator to our pins. All of the other pins were grounded to avoid coupling. 
 +> 
 +>{{:basys3:xadc3.jpg?300|}}{{:basys3:xadc4.jpg?300|}}
  
-The 7-Segment display shows the current voltage across the selected xadc pins. The LEDs turn on from right to left as the input voltage increases. 
  
-{{:basys3:xadc1.jpg?300|}}{{:basys3:xadc2.jpg?300|}}+>4.2) Seven Segment Display and LEDs 
 +> 
 +>The 7-Segment display shows the current voltage across the selected xadc pins. The LEDs turn on from right to left as the input voltage increases. 
 +> 
 +>{{:basys3:xadc1.jpg?300|}}{{:basys3:xadc2.jpg?300|}}
  
-==== 3. Selecting a channel ==== +>4.3) Selecting a channel 
- +> 
-To display a different channel on the display and LEDs, change sw0 and sw1 to the desired channel.+>To display a different channel on the display and LEDs, change sw0 and sw1 to the desired channel.
  
  
      
-