Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
anvyl:refmanual [2014/09/11 21:58] – [Expansion Connectors] Joshua Woldstadanvyl:refmanual [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 32: Line 32:
   * GPIO: 14 LEDs (10 red, 2 yellow, 2 green), 8 slide switches, 8 DIP switches in 2 groups and 4 push buttons   * GPIO: 14 LEDs (10 red, 2 yellow, 2 green), 8 slide switches, 8 DIP switches in 2 groups and 4 push buttons
   * breadboard with 10 Digital I/O’s    * breadboard with 10 Digital I/O’s 
-  * 32 I/O’s routed to 40-pin expansion connector (I/O’s are shared with Pmod connectors) +  * 32 I/O’s routed to 40-pin expansion connector (I/O’s are shared with Pmod ports) 
-  * seven 12-pin Pmod connectors with 56 I/O’s total+  * seven 12-pin Pmod ports with 56 I/O’s total
   * ships with a 20W power supply and USB cable   * ships with a 20W power supply and USB cable
  
Line 320: Line 320:
 ====== Expansion Connectors ====== ====== Expansion Connectors ======
  
-The Anvyl board has a 2x20 pin connector and seven 12-pin Pmod connectors. Pmod connectors are 2x6 right-angle, 100-mil female connectors that work with standard 2x6 pin headers available from a variety of catalog distributors. Each 12-pin Pmod connector provides two 3.3V VCC signals (pins 6 and 12), two Ground signals (pins 5 and 11), and eight logic signals. VCC and Ground pins can deliver up to 1A of current. Pmod data signals are not matched pairs, and they are routed using best-available tracks without impedance control or delay matching. Digilent produces a large collection of Pmod accessory boards that can attach to the Pmod connectors. We have a set of recommended Pmods for the Anvyl called the “Anvyl Pmod Pack”.+The Anvyl board has a 2x20 pin connector and seven 12-pin Pmod ports. Pmod ports are 2x6 right-angle, 100-mil female connectors that work with standard 2x6 pin headers available from a variety of catalog distributors. Each 12-pin Pmod port provides two 3.3V VCC signals (pins 6 and 12), two Ground signals (pins 5 and 11), and eight logic signals. VCC and Ground pins can deliver up to 1A of current. Pmod data signals are not matched pairs, and they are routed using best-available tracks without impedance control or delay matching. Digilent produces a large collection of Pmod accessory boards that can attach to the Pmod ports. We have a set of recommended Pmods for the Anvyl called the “Anvyl Pmod Pack”.
  
 {{ :anvyl:exp1.png?400 |}} {{ :anvyl:exp1.png?400 |}}