Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
analog_discovery_bnc_adapter_board:refmanual [2015/09/08 17:59] – created Marthaanalog_discovery_bnc_adapter_board:refmanual [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 16: Line 16:
 The two AWG channels are equipped with BNC terminations for use with BNC style test leads. Each of the two channels can have either the 50Ω or the 0Ω termination selected. This enables the user to match the Analog Discovery's output impedance with either standard 50-ohm test leads or to be directly tied to the lead. The two AWG channels are equipped with BNC terminations for use with BNC style test leads. Each of the two channels can have either the 50Ω or the 0Ω termination selected. This enables the user to match the Analog Discovery's output impedance with either standard 50-ohm test leads or to be directly tied to the lead.
  
-All the remaining signals from the Analog Discovery pass through the adaptor to a female header located on the outer edge of the board. +All the remaining signals from the Analog Discovery pass through the adapter to a female header located on the outer edge of the board.  
 + 
 +/* 
 +====== Discovery BNC Adapter Reference Manual ====== 
 +The Discovery BNC adapter board is intended to be used with Digilent's Analog Discovery tool to enable the use of standard BNC terminated test leads and probes. The adapter board enables the user to AC couple or DC couple signals to the oscilloscope in the Analog Discovery 2.  
 + 
 +image thing 
 + 
 +==== Features ==== 
 +  * Standard BNC interface to BNC terminated test leads and oscilloscope probes. 
 +  * Selectable AC and DC coupling to oscilloscope probes. 
 +  * Selectable 50-ohm or 0-ohm output impedance on Arbitrary Waveform Generator (AWG) channels. 
 + 
 +===== Functional Description ===== 
 +text and stuff 
 + 
 +===== Pinout Diagram ===== 
 + 
 + 
 + 
 + 
 + 
 +*/