DC Power Supply

DC Power Supply

Commands that provide access to DC Power Supply data and functions.

Get Current State

Get the current state of the instrument's channel

Command

dc - (Object) - The DC power supply object.
- # - (Array<Object>) - An array of command objects to apply to the DC power supply channel.
  - command - (String) - The Get Current State command: “getCurrentState”

Response

gpio - (Object) - The DC power supply object.
- # - (Array<Object>) - An array of command objects applied to the DC power supply channel.
  - command - (String) - The Get Current State command: “getCurrentState”
  - statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
  - wait - (Integer) - The number of ms to wait before the device is ready to process another command.
  - state - (String) - The current state of the channel: “idle” or “running”.
  - voltage - (Integer) - The current measured value of the channel in mV.

Example

Command

{
    "dc": {
        "1": [
            {
                "command":"getCurrentState"
            }
        ]
    }
}

Response

{
    "dc": {
        "1": [
            {
                "command": "getCurrentState",
                "statusCode": 0,
                "wait": 0,
                "state": "idle",
                "voltage": 3300                
            }
        ]
    }
}

Get Voltage

Get the output voltage(s) of the specified DC power supply channel(s).

Command

dc - (Object) - The DC power supply object.
- # - (Array<Object>) - An array of command objects to apply to the DC power supply channel.
  - command - (String) - The Get Voltage command: “getVoltage”

Response

gpio - (Object) - The DC power supply object.
- # - (Array<Object>) - An array of command objects applied to the DC power supply channel.
  - command - (String) - The Get Voltage command: “getVoltage”
  - statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
  - wait - (Integer) - The number of ms to wait before the device is ready to process another command.
  - voltage - (Integer) - The current measured value of the channel in mV.

Example:

Command

{
   "dc":{
      "1":[
         {
            "command":"getVoltage"
         }
      ]
   }
}

Response

{
   "dc":{
      "1":[
         {
            "command":"getVoltage",
            "statusCode":0,
            "wait":100,
            "voltage":3300
         }
      ]      
   }
}

Set Voltage

Set the output voltage(s) of the specified DC power supply channel(s).

Command

dc - (Object) - The DC power supply object.
- # - (Array<Object>) - An array of command objects to apply to the DC power supply channel.
  - command - (String) - The Set Current State command: “setCurrentState”
  - voltage - (Integer) - The desired voltage in mV.

Response

gpio - (Object) - The DC power supply object.
- # - (Array<Object>) - An array of command objects applied to the DC power supply channel.
  - command - (String) - The Set Current State command: “setCurrentState”
  - statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
  - wait - (Integer) - The number of ms to wait before the device is ready to process another command.

Example:

Command

{
   "dc":{
      "1":[
         {
            "command":"setVoltage",
            "voltage":3300
         }
      ]
   }
}

Response

{
   "dc":{
      "1":[
         {
            "command":"setVoltage",
            "statusCode":0,
            "wait":500
         }
      ]
   }
}

Table of Contents

DC Power Supply

Get Current State

Example

Get Voltage

Example:

Set Voltage

Example: