ZedBoard is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (AP SoC). This board contains everything necessary to create a Linux®, Android®, Windows®, or other OS/RTOS based design. Additionally, several expansion connectors expose the processing system and programmable logic I/Os for easy user access.

Take advantage of the Zynq-7000 AP SoCs tightly coupled ARM® processing system and 7-series programmable logic to create unique and powerful designs with the ZedBoard. Target applications include video processing, motor control, software acceleration, Linux/Android/RTOS development, embedded ARM processing, and general Zynq-7000 AP SoC prototyping.

Download the User Guide

• Xilinx® XC7Z020-1CSG484CES EPP
  • Primary configuration = QSPI Flash
  • Auxiliary configuration options
    • Cascaded JTAG
    • SD Card
• Memory
  • 512 MB DDR3 (128M x 32)
  • 256 Mb QSPI Flash
• Interfaces
  • USB-JTAG Programming using Digilent SMT1-equivalent circuit
    • Accesses PL JTAG
    • PS JTAG pins connected through PS Pmod
  • 10/100/1G Ethernet
  • USB OTG 2.0
  • SD Card
  • USB 2.0 FS USB-UART bridge
  • Five Digilent Pmod™ compatible headers (2×6) (1 PS, 4 PL)
  • One LPC FMC
  • One AMS Header
  • Two Reset Buttons (1 PS, 1 PL)
  • Seven Push Buttons (2 PS, 5 PL)
  • Eight dip/slide switches (PL)
  • Nine User LEDs (1 PS, 8 PL)
  • DONE LED (PL)
• On-board Oscillators
  • 33.333 MHz (PS)
  • 100 MHz (PL)
• Display/Audio
  • HDMI Output
  • VGA (12-bit Color)
  • 128×32 OLED Display
  • Audio Line-in, Line-out, headphone, microphone
• Power
  • On/Off Switch
  • 12V @ 5A AC/DC regulator
• Software
  • ISE® WebPACK Design Software
  • License voucher for ChipScope™ Pro locked to XC7Z020