Pmod STEP
Buy
Reference Manual
Technical Support
Pmod STEP
Stepper Motor Driver
Features
- Stepper motor driver for 4 and 6-pin motors
- Can drive both motors simultaneously
- Multiple LEDs to indicate signal propagation
- Jumper for optional external power
- 2×6-pin Pmod connector with GPIO interface
- Follows the Digilent Pmod Interface Specification Type 1
Physical
Width
2.8 in (7.11 cm)
Length
1.3 in (3.30 cm)
J1 Pinout
Pin 1
SIG1
Pin 2
SIG2
Pin 3
SIG3
Pin 4
SIG4
Pin 5
GND
Pin 6
VCC
Pin 7
SIG5
Pin 8
SIG6
Pin 9
SIG7
Pin 10
SIG8
Pin 11
GND
Pin 12
VCC
Please note: Digilent does not currently sell compatible stepper motors for the Pmod STEP.
The Pmod STEP is retired and no longer for sale in our store.
The Digilent Pmod STEP (Revision A) can drive either a 4-pin or 6-pin stepper motor.
Example Projects
Microprocessor
- Electrical Connections on the 3D Printed IPad Mount - Community Project
- Using the Pmod STEP with Arduino Uno - Application note
Programmable Logic
- How to control a stepper motor with an FPGA - Community Project
- Using a Joystick to control Stepper Motors with an FPGA - Community Project
Additional Resources
- Specification Version 1.2.0: PDF
- How to use a Stepper Motor Instructable