Pmod SSR
Buy
Reference Manual
Technical Support
Pmod SSR
Solid State Relay
Features
- 0-48 V blocking voltage
- Can switch up to 6 Arms continuous current
- 2500 V input/output isolation
- Low on resistance with fast turn on/off
- Onboard LED to indicate on/off state
- Onboard terminal block for easy wire connection
- Follows the Digilent Pmod Interface Specification Type 1
Physical
Width
1.7 in (4.32 cm)
Length
0.80 in (2.03 cm)
Overall Height
0.75 in (1.905 cm)
Design Resources
3D CAD file
J1 Pinout
Pin 1
ON
Pin 2
NC
Pin 3
NC
Pin 4
NC
Pin 5
GND
Pin 6
VCC
The Digilent Pmod SSR (Revision B) is a solid state relay that features IXYS' CPC1908J. The Pmod SSR uses a switch controlled by a single GPIO pin and is rated to block up to 48 Volts and switch up to 6 Arms continuous current.
Example Projects
Microprocessor
- Using the Pmod SSR with Arduino Uno - Application note
Programmable Logic
-
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Specification Version 1.2.0: PDF