====== Discovery Power Supply (DSP3340) Getting Started Guide ======

~~TechArticle~~

{{test-and-measurement/analog-discovery-pro-5250/instrument-supplies.png?800 }}

===== Overview =====
This guide will get you started with your new Discovery Power Supply (DPS3340), from getting it out of the box to taking your first measurement. 
----
===== Inventory =====
  * Your new Discovery Power Supply (DPS3340)
  * Banana plug to alligator clip or banana plug to mini grabber cables
  * USB A to B cable
  * North American Power Supply Cable 
  * International Power Adapter (PN 300-008)
  * International Power Adapter (PN 300-009)
  * A Windows computer and the WaveForms application installer (version 3.18.14 or later)
    * The installer for Windows can be found here: [[https://mautic.digilentinc.com/waveforms-download|WaveForms installers]].


----
===== Guide =====
==== 1. Unboxing ====
-->Unboxing#
<WRAP group> <WRAP half column>
The Analog Discovery Pro arrives in a large box.  
</WRAP> <WRAP half column>
{{:test-and-measurement:discovery-power-supply-3340:photoneeded.png?600 |}}
</WRAP> </WRAP>
----
<WRAP group> <WRAP half column>
The Analog Discovery Pro can be seen in the foam.
</WRAP> <WRAP half column>
{{:test-and-measurement:discovery-power-supply-3340:photoneeded.png?600 |}}
</WRAP> </WRAP>
----
<WRAP group> <WRAP half column>
Underneath the Analog Discovery Pro is another box containing the accessories.
</WRAP> <WRAP half column>
{{:test-and-measurement:discovery-power-supply-3340:photoneeded.png?600 |}}
</WRAP> </WRAP>
----
<WRAP group> <WRAP half column>
Several inserts with some getting started instructions are also included. Here you can see everything!
</WRAP> <WRAP half column>
{{:test-and-measurement:discovery-power-supply-3340:photoneeded.png?600 |}}
</WRAP> </WRAP>


<--

----
==== 2. Download and Install WaveForms ====

Digilent's WaveForms application provides a user interface to the Discovery Power Supply (DPS3340). Please download the WaveForms Windows installer. If WaveForms is already installed, please make sure that it is up to date (version 3.18.14 or later).

Check the [[#Inventory|Inventory]] section, above, for the download link.

----

--> Installing WaveForms : Windows#

<WRAP group>
<WRAP column half>
=== Open the Executable File ===
Open the executable file that you downloaded.
</WRAP>
<WRAP column half>
{{ :learn:instrumentation:tutorials:downloadwf.png?nolink&500 |}}
</WRAP>
</WRAP>

---------------
<WRAP group>
<WRAP column half>
=== Welcome ===
Launch the WaveForms installer, by clicking on it in the Downloads folder. Upon launching the WaveForms installer, the welcome page will be seen. Click **Next**.
</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-studio:gsg-install-summary.png?nolink |}}
</WRAP>
</WRAP>

------------
<WRAP group>
<WRAP column half>
=== License Agreement ===
Read the license agreement on this screen, then, if in agreement to it, click **I Agree** to continue.
</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-studio:gsg-install-license.png?nolink |}}
</WRAP>
</WRAP>

-----------------
<WRAP group>
<WRAP column half>
=== Choose Components ===
In the "Choose Components" screen, a list is presented of each of the things that can be installed. In order to use the Discovery Power Supply with the WaveForms application, the Adept Runtime, WaveForms Runtime, and WaveForms Application are required.
  * The Adept Runtime allows WaveForms to communicate with the Analog Discovery 2, Analog Discovery, Analog Discovery Studio, Digital Discovery, Discovery Power Supply, and Electronics Explorer Board.
  * The WaveForms Runtime contains a library and device support files needed to run custom applications.
  * The WaveForms Application is the Digilent virtual instrumentation interface.
  * The WaveForms SDK is the software development kit for creating custom applications.
  * If you have an DPS3340theorecitcally, make sure to check the box for its driver installation, to ensure that your PC will be able to communicate with the device.
**Note:** //Even with all components selected, the WaveForms install does not take much hard drive space (<200MB). Digilent recommends that all components are installed.//
</WRAP>
<WRAP column half>
{{:software:waveforms:waveforms-3:newinstall.jpg?600|}}
</WRAP>
</WRAP>

------------
<WRAP group>
<WRAP column half>
=== Shortcut Options ===
Click **Next**.
</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-studio:gsg-install-shortcuts.png?nolink |}}
</WRAP>
</WRAP>

-------------
<WRAP group>
<WRAP column half>
=== Choose Install Location ===
  * You'll need to choose an installation destination or just leave it at the default.
  * Click "Install".
</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-studio:gsg-install-location.png?nolink |}}
</WRAP>
</WRAP>

----------------
<WRAP group>
<WRAP column half>
=== Installing / Installation Complete ===
  * WaveForms will be installed as indicated by the progress bar.
  * Click "Next".
</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-studio:gsg-install-complete.png?nolink |}}
</WRAP>
</WRAP>

------------
<WRAP group>
<WRAP column half>
=== Complete ===
  * Check or uncheck the boxes to open WaveForms and the readme.
  * Click "Finish".
</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-studio:gsg-install-finish.png?nolink |}}
</WRAP>
</WRAP>

------------
<--

----
==== 3. Enable the Supplies  ====


This section walks through using the Discovery Power Supply (DPS3340) for the first time. We will use the +5V power supply to power an external device.  

--> Power Supply Setup #

<WRAP group><WRAP column half>
=== 1. ===
If you haven't yet, plug the Discovery Power Supply into an outlet, then plug the power supply into the Discovery Power Supply DPS3340.
=== 2. ===
Plug the Discovery Power Supply into the computer via the USB cable.
=== 3. ===
Flip the power switch on the left side of the Discovery Power Supply to the On Position and wait for the Discovery Power Supply DPS3340 to turn on.
</WRAP><WRAP column half>
{{:test-and-measurement:discovery-power-supply-3340:img_4219.png?600 |}}
</WRAP> </WRAP>

----

<WRAP group><WRAP column half>
=== 4. ===
Plug in a set of banana plug connectors into the **Output 1** port on the front of the Discovery Power Supply. Please connect the red banana plug to the red connector on the Discovery Power Supply DPS3340 and the black banana plug to the black connector.  While theoretically you could use any color, keeping things the same will avoid confusion when working with your circuit.  Use the alligator clip or minigrabber clips to connect the power supply to your Device Under Test.
</WRAP><WRAP column half>
{{:test-and-measurement:discovery-power-supply-3340:img_4232.png?600 |}}
</WRAP></WRAP>

----

<WRAP group><WRAP column half>
=== 5. ===
Launch the WaveForms application. Upon launch, WaveForms will automatically detect and connect to the Discovery Power Supply in the Device Manager. If the Discovery Power Supply is not connected to the host computer when WaveForms launches, plug in the device and turn it on, at which point it will appear in the Device Manager’s device list.

If your device doesn't show up, you can click the **Refresh Stopped** button to have WaveForms begin automatically refreshing the list of devices.

</WRAP><WRAP column half>
{{:test-and-measurement:discovery-power-supply-3340:wvstiff.jpg?600 |}}
</WRAP></WRAP>

----
<WRAP group><WRAP column half>
== 6. ==
In WaveForms, open the //Supplies// instrument by clicking on the **Supplies** button in the instrument panel on the left side of the screen.  Set the voltage and current from the dropdown menu.  Turn *off* the +15V and -15V power supplies, since we only are hooking up the 5V supply.  Click Master Enable to turn the Power Supply on.
</WRAP><WRAP column half>
{{:test-and-measurement:discovery-power-supply-3340:plot.jpg?600 |}}
</WRAP></WRAP>

----

<--
----
===== Other Resources =====

To find reference materials and guides on how to use the Analog Discovery Pro and WaveForms, please visit the [[start|Discovery Power Supply (DPS3340) Resource Center]].

For technical support, please visit the Test and Measurement section of the [[https://forum.digilentinc.com|Digilent Forum]].