====== Analog Discovery Studio Specifications ======

==== Hardware Specifications ====
=== Analog Inputs ===
  * Two analog input channels, accessible through BNC or MTE connectors
  * Channel type: differential (with MTE) or single-ended (with BNC)
  * Instruments supported: Oscilloscope, Voltmeter, Network Analyzer, Spectrum Analyzer

  * Analog bandwidth with BNC cables: 30+ MHz @ 3dB, 10 MHz @ 0.5dB, 5 MHz @ 0.1dB
  * Analog bandwidth with MTE flywires: 9 MHz @ 3dB, 2.9 MHz @ 0.5dB, 0.8 MHz @ 0.1dB
  * Input range: ±25V (±50V diff)
  * Input impedance: 1MΩ||24pF
  * Input protected to: ±50V
  * CMMR (typical): ±0.5%
  * Input coupling: DC only

  * Sample rate (real time): 100 MS/s
  * Resolution: 14-bit
  * Absolute Resolution (scale ≤0.5V/div): 0.32mV
  * Absolute Resolution (scale≥1V/div): 3.58mV
  * Accuracy (scale≤0.5V/div, VinCM = 0V): ±10mV±0.5%
  * Accuracy (scale≥1V/div, VinCM = 0V): ±100mV±0.5%
  * Buffer size/channel: Up to 16k samples

=== Analog Outputs ===
  * Two function generator channels, accessible through BNC or MTE connectors
  * Channel type: single ended
  * Instruments supported: Waveform Generator (shared w/ Spectrum/Network Analyzers?)

  * Analog bandwidth (BNC or MTE connectors): 8 MHz @ 3dB
  * AC amplitude (max): ±5 V
  * DC Offset (max): ±5 V
  * Slew rate (10V step): 400V/µs

  * Sample rate (real time): 100 MS/s
  * Resolution: 14-bit
  * Absolute Resolution (amplitude ≤1V): 166µV
  * Absolute Resolution (amplutide >1V): 665µV
  * Accuracy - typical (|Vout| ≤ 1V): ±10mV ± 0.5%
  * Accuracy - typical (|Vout| > 1V): ±25mV ± 0.5%
  * Buffer size/channel: up to 16k samples

=== Digital Inputs and Outputs ===
  * 16 digital input/output channels, accessible through MTE connectors
  * Instruments supported: Digital I/O, Digital Pattern Generator, Logic Analyzer

  * Sample Rate: 100 MS/s
  * Input logic standard: LVCMOS (1.8V/3.3V, 5V tolerant)
  * Output logic standard: LVCMOS (3.3V, 12mA)
  * Buffer size/channel: up to 16K samples

=== Power Supplies ===
  * 12 Volt Rail: 12V +/-5%; 0.2 Amps max; Max capacitance of 1000uF
  * -12 Volt Rail: -12V +/-5%; 0.2 Amps max; Max capacitance of 150uF
  * 5 Volt Rail: 5.0V +/-5%; 1.0 Amps max; Max capacitance of 1000uF
  * 3.3 Volt Rail: 3.3V +/-5%; 1.0 Amps max; Max capacitance of 1000uF
  * Programmable power supply rails (V+, V-):
    * Voltage range: 1V…5V (V+) and -1V…-5V (V-)
    * Maximum power output: 2.1W for each supply
    * Maximum current output: 700mA for each supply
    * Accuracy (no load): ±10mV
    * Output impedance: 50mΩ (typical)

=== System Power ===
  * Powered only from Barrel Jack with 15V 2.4A supply
  * Power switch on side of device (labeled "POWER")
  * Plug outer diameter: 5.5mm
  * Plug inner diameter: 2.5mm
  * Center positive plug

=== Connectivity ===
  * USB A port available for powering components
  * USB B port for communications with host computer (labeled "DEVICE")
  * 3.5mm Headphone jack connected to both analog output channels

----