===== Connecting to the Analog Discovery Pro (ADP3450/ADP3250) Over Terminal =====
-->Terminal Connection#
<WRAP group>
<WRAP column half>
**Connect** the Analog Discovery Pro to a host computer via USB, open the host's device manager to find what serial port the device is connected to and make note of it.

</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-pro-3x50:device_manager_com_port.png?600 |}}
</WRAP>
</WRAP>

<WRAP group>
<WRAP column half>
**Open** a terminal emulator such as PuTTY or TeraTerm and connect to the noted serial port using 115200 Baud, 8-data, 1-stop, and no parity bits.

//Note// that if the Analog Discovery Pro is connected to immediately after booting, it may take approximately 20 seconds for the login prompt to be presented. If the screen is blank upon successful connection, press **Enter** on the keyboard and the login prompt should now be displayed.
</WRAP>
<WRAP column half>
<columns 100% 55% 45%>
{{ reference:test-and-measurement:analog-discovery-pro-3x50:teraterm_start.png?600 |}}
<newcolumn>
{{ reference:test-and-measurement:analog-discovery-pro-3x50:teraterm_set.png?600 |}}
</columns></WRAP>
</WRAP>

<WRAP group>
<WRAP column half>
**Login** with username: digilent and password: digilent.

//Note// that upon login, a "urandom warning" may be printed to the terminal, and can safely be ignored.
</WRAP>
<WRAP column half>
{{ reference:test-and-measurement:analog-discovery-pro-3x50:teraterm_login.png?600 |}}
</WRAP>
</WRAP>
<--