~~NOTOC~~ 
      
====== Sword ======
{{Digilent Infobox
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/4-fpga/
| Title = Sword
| Subtitle = Kintex-7 FPGA Development Board
| Header = Features
| Bullet = Wide variety of memory devices and I/O
| Bullet = Programmable from JTAG and Quad-SPI flash
| Header = Key Specifications
| FPGA Part # = XC7K325T-2FFG900C
| Logic Slices =  50,950 slices
| Block RAM = 2002.5 KBytes
| DSP slices = 840 DSP slices
| CMTs = 10 clock management tiles
| DDR3 = 1024MB @ 1800Mbps with 32-bit data width
| Internal clock = 700 MHz+
| Quad-SPI Flash = 32 MB
| SRAM = 2MB and 4MB SRAMs with a shared 32-bit address bus
| Parallel Flash = 32 MB with 32-bit data width
| Header = Connectivity and On-board I/O
| Pmod Connectors = 4 Pmod ports
| VGA = 1 VGA connector
| HDMI = HDMI Sink and HDMI Source
| SD = microSD card connector
| USB = HID host for mouse, keyboard, \\ and user USB \\ USB-JTAG Programmer
| Audio = Audio codec with four 3.5mm jacks
| Ethernet = 10/100/1000 PHY
| SFP+ = 2 10Gbps SFP+ PHY interfaces
| RS232 = 1 DB9F RS232 connector
| Shield Connector = Arduino / chipKIT compatible
| Seven Segment Display = 8 digits
| LEDs = 16 LEDs, 2 RGB LEDs
| Switches = 16 slide switches
| Buttons = 2 resets \\ 25 button keypad
| Header = Electrical
| Power = 12V ±5 % external power only (PCIE connector)
| Header = Physical
| Width = 7-1/8 in
| Length = 9-1/16 in
}}

{{page>reference-manual}} \\ \\

===== Documentation =====
{{topic>sword +doc -legacy}}

----
===== Tutorials =====
{{topic>sword +tutorial -legacy -in-work}}

----
===== Example Projects =====
{{topic>sword +project -legacy}}

----
===== Additional Resources =====

----
{{tag>resource-center}}
/*{{tag>programmable-logic programmable-logic-start sword}}*/