~~NOTOC~~ 
     
====== PYNQ-Z1 ======
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pynq-z1-python-productivity-for-zynq-7000-arm-fpga-soc/
| Manual = [[reference-manual]]
| Support = http://pynq.io
| Title = PYNQ-Z1 
| Subtitle = Python Productivity for Zynq
| Header = Features
| Bullet = Fully supported by the PYNQ framework 
| Bullet = 650MHz dual-core Cortex-A9 processor
| Bullet = 512 MB DDR3
| Bullet = Wide range of USB, Ethernet, Video and Audio connectivity
| Bullet = Arduino shield and Pmod connectors for adding-on hardware devices
| Bullet = Programmable from JTAG, Quad-SPI flash, and microSD card
| Header = Key FPGA Specifications
| Logic slices = 13,300 
| 6-input LUTs =  53,200
| Flip-Flops = 106,400
| Block RAM = 630 KB
| DSP Slices = 220
| Clock Resources = Zynq PLL with 4 outputs \\ 4 PLLs \\ 4 MMCMs \\ 125 MHz external clock
| Internal ADC = Dual-channel, 1 MSPS
| Header = Connectivity and On-board I/O
| USB = USB-UART \\ USB-JTAG Programmer \\ USB Host
| Ethernet = Gigabit Ethernet PHY
| HDMI = Sink (input) \\ Source (output)
| Microphone = Microphone with PDM interface
| Audio = PWM driven mono audio output \\ with 3.5mm jack
| Pmod Connectors = 2
| Other Connectors = Arduino/chipKIT shield connector
| Switches = 2 slide switches
| Buttons = 4 Push buttons 
| LEDs = 4 LEDs, 2 RGB LEDs
| Header = Electrical
| Power Inputs = USB \\ 7V-15V External source
| Header = Physical
| Width = 88 mm
| Length = 124 mm
| 3D model = {{ :reference:programmable-logic:pynq-z1:pynq-z1_3d.zip |Download}}
| 3D Case = {{ :reference:programmable-logic:pynq-z1:pynq_case_modified.zip |Download }}
| Header = Design Resources
| PYNQ Boot Image = [[https://files.digilent.com/Products/PYNQ/pynq_z1_v2.4.zip| PYNQ-Z1 Image]]
| Master XDC = {{ :reference:programmable-logic:pynq-z1:pynq-z1_c.zip |Download}}
| Zynq Presets = {{ :reference:programmable-logic:pynq-z1:pynq_revc.zip |Download}}
| Protective Acrylic case = {{ :reference:programmable-logic:pynq-z1:pynq_case.zip |Download}}
| Header = Documentation
| Zynq Datasheet = [[https://docs.xilinx.com/v/u/en-US/ds187-XC7Z010-XC7Z020-Data-Sheet | XC7Z020-1CLG400C]]
| Zynq Manual = [[https://docs.xilinx.com/v/u/en-US/ug585-Zynq-7000-TRM|Zynq TRM]]
| Schematic = {{:reference:programmable-logic:pynq-z1:pynq-z1_sch.pdf| Rev. C}}
| PYNQ Manual= [[http://pynq.readthedocs.io| pynq.readthedocs.io]]
| PYNQ Github = [[https://github.com/Xilinx/PYNQ| PYNQ Github]]
| Header = Product Compliance
| HTC = 8471500150
| ECCN = 5A992.c
}}

{{page>reference-manual}} \\ \\
 
===== Tutorials =====
{{topic>pynq-z1 +tutorial}}
All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
----
===== Example Projects =====
{{topic>pynq-z1 +project}}
All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
----
===== Additional Resources ===== 
  * [[https://www.xilinx.com/support/university/workshops.html|Xilinx Vivado Workshop materials]]

----

{{tag>programmable-logic programmable-logic-start pynq-z1 resource-center}}