~~NOTOC~~ 
    
====== Nexys Video ======
{{Digilent Infobox
| Store Page = https://digilent.com/shop/nexys-video-artix-7-fpga-trainer-board-for-multimedia-applications/
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/4-fpga/
| Title = Nexys Video
| Subtitle = Artix-7 FPGA
| Header = Features
| Bullet = Programmable over JTAG and Quad-SPI Flash
| Bullet = On-chip analog-to-digital converter
| Header = Key Specifications
| FPGA Part # = XC7A200T-1SBG484C
| Logic Slices =  33,650 (4 6-input LUTs & \\ 8 flip-flops each)
| Block RAM = 13Mbits
| Clock Tiles = 10 (each with PLL)
| DSP Slices = 740
| Internal clock = 450MHz+
| Transceivers = 3.75Gbps GTP transceivers
| DDR3 = 512MB 800MHz
| Quad-SPI Flash = 32MB
| Ethernet = 10/100/1000 PHY w/ \\ included unique MAC address
| Header = Connectivity and Onboard I/O
| SD = microSD slot for non-volatile storage
| Pmod Connectors = 3 Pmod ports
| HDMI = HDMI sink and HDMI source
| Audio = 240-bit codec w/ four 3.5mm jacks
| Display = 128x32 monochrome OLED
| Switches = 8
| Buttons = 5
| LEDs = 8
| Header = Electrical
| Power = Powered from any 12V source
| Logic Level = 3.3V
| Header = Physical
| Width = 5.3 in
| Length = 5.3 in
}}

{{page>reference-manual}} \\ \\

===== Documentation =====
{{topic>nexys-video +doc -legacy}}

----
===== Tutorials =====

  * [[programmable-logic:guides:installing-vivado-and-vitis]]
    * Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
  * [[programmable-logic:guides:getting-started-with-ipi]]
    * Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
  * [[programmable-logic:guides:getting-started-with-vivado]]
    * Walks through using Vivado to create a simple design that blinks a single LED.
  * [[learn/programmable-logic/tutorials/pmod-ips/start]]
    * Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
    * It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.

  * [[learn/programmable-logic/tutorials/htsspisf/start]]
  * [[learn/programmable-logic/tutorials/nexys-video-getting-started-with-microblaze-servers/start]]
  * [[learn/programmable-logic/tutorials/nexys-video-programming-guide/start]]

----
===== Example Projects =====
{{topic>nexys-video +project -legacy}}

----
===== Community Projects =====
{{Digilent Hackster
| product = "Nexys-Video"
}}  

  * [[https://support.xilinx.com/s/article/777077|Adam Taylor: Basic Video Processing on Nexys Video]]
  * [[https://support.xilinx.com/s/article/778385|Adam Taylor: Software for a Nexys Video Project]]

----
===== Additional Resources =====
  * [[learn:programmable-logic:tutorials:nexys-video-dpti-demo:start:|Nexys Video DPTI Demo]]
  * [[learn:programmable-logic:tutorials:nexys-video-looper-demo:start:|Nexys Video Music Looper Demo]]
  * [[learn:programmable-logic:tutorials:nexys-video-user-demo:start:|Nexys Video User Demo]]
  * {{/reference/programmable-logic/nexys-video/nexys_video_fmc_to_fpga_connections.pdf|Nexys Video FMC to FPGA Connections}}
  * {{:reference:programmable-logic:nexys-video:nexys_video.zip|3D CAD Model}}
  * {{:reference:programmable-logic:nexys-video:nexys_video_dimensions.zip| Mechanical Drawings}}
  * {{ :reference:programmable-logic:nexys-video:nexysvideomig.zip |ZIP archive}} including NexysVideoMIG.prj and NexysVideoMIG.ucf files for use of Xilinx's Memory Interface Generator with a Native Interface

----

{{tag>programmable-logic programmable-logic-start nexys-video resource-center}}