~~NOTOC~~ 
    
====== NetFPGA-1G-CML ======
{{Digilent Infobox
| Manual = [[reference-manual]]
| Support = start#additional_resources
| Title = NetFPGA-1G-CML
| Subtitle = Kintex-7 FPGA Development Board
| Header = Key Specifications
| Logic Cells =  50,950 slices, \\ (4 6-input LUTs & 8 flip-flops each)
| DDR3 = 512MB dynamic RAM (800MHz)
| QDRII+ = 4.5MB static RAM (450MHz)
| BPI Flash = 1-Gbit BPI Flash
| Oscillator = Low-jitter 200MHz
| Block RAM = 16Mbit
| DSP Slices = 840
| CMTs = 10 with 1 PLL and one \\ mixed-mode clock manager each
| Ethernet = 10/100/1000 PHYS with RGMII
| Encryption = AES bitstream encryption and \\ SHA-256 authentication w/ \\ battery-backed encryption key
| Header = Connectivity and On-board I/O
| Pmod Connectors = 2 Pmod ports
| PCI = Gen 2 PCI Express
| Microcontroller = 32-bit PIC microcontroller
| FMC = High pin count FMC connector \\ (100 select I/O and \\ 4 GTX serial pairs)
| I/O = 400 select I/O ports \\ (250 high range, 150 high speed)
| Buttons = 4
| LEDs = 4
| SD = SD card slot
| Header = Electrical
| Power = 12V 5A or greater power source
| Logic Level = 3.3V
| Header = Physical
| Width = 4.2 in
| Length = 7.2 in
| Header = Design Resources
| GitHub = [[https://github.com/NetFPGA/NetFPGA-public/wiki/Home_NetFPGA-1G-CML | NetFPGA GitHub]]
| Header = Documentation
| Primary IC = [[https://www.xilinx.com/products/silicon-devices/fpga/kintex-7.html| Kintex-7]] (XC7K325T-1FFG676)
| Schematic = {{:reference:programmable-logic:netfpga-1g-cml:netfpga-1g-cml_sch.pdf| }}
}}

{{page>reference-manual}} \\ \\
 
===== Tutorials =====
----
{{topic>netfpga-1g-cml +tutorial}}


===== Example Projects =====
----
{{topic>netfpga-1g-cml +project}}

===== Additional Resources =====
The best point of contact for support regarding the NetFPGA 1G CML customers is by contacting support @ cmlab (dot) biz.
----

{{tag>programmable-logic programmable-logic-start netfpga-1g-cml resource-center}}