~~NOTOC~~ 
    
====== Cmod S6 ======
{{Digilent Infobox
| Store Page = https://digilent.com/shop/cmod-s6-breadboardable-spartan-6-fpga-module/
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/4-fpga/
| Title = Cmod S6
| Subtitle = Breadboardable Spartan-6 FPGA Module
| Header = Features
| Bullet = On-board Adept USB2 port for configuration, test and communications interfaces.
| Header = Key Specifications
| Logic Cells = 3,840 (6 LUTs)
| Block RAM = 216Kb
| DSP Slices = 8
| CMTs = 2 (4 DCMs and one PLL)
| Quad-SPI Flash = 16MB
| Header = Connectivity and On-board I/O
| GPIO = 46 signals brought to DIP pins
| LEDs = 4
| Buttons = 2
| Clock Inputs = 2
| Header = Electrical
| Power = USB or power source connected \\  to DIP pin 24 (5-15V)
| Logic Level = 3.3V
| Header = Physical
| Width = 0.7 in
| Length = 2.6 in
| Header = Design Resources
| Master UCF File = {{:reference:programmable-logic:cmod-s6:cmod_s6_master_ucf.zip|ZIP}}
| 3D Model = {{:reference:programmable-logic:cmod-s6:cmod_s6_model.zip|STP model}}
| Mechanical Drawing = {{:reference:programmable-logic:cmod-s6:cmod_s6_dimensions.zip|DXF }}
| Header = Documentation
| Primary IC = [[https://docs.xilinx.com/v/u/en-US/ds160|Spartan-6]] (XC6SLX4-2CPG196)
| Reference Manual = [[programmable-logic/cmod-s6/reference-manual]]
| Schematic = {{:reference:programmable-logic:cmod-s6:cmods6_sch.pdf|Rev. A}}
}}

{{page>reference-manual}} \\ \\
 
===== Tutorials =====
{{topic>cmod-s6 +tutorial}}

----
===== Example Projects =====
{{topic>cmod-s6 +project}}

----
===== Additional Resources =====
  * Cmod S6 factory-loaded demonstration project: {{:cmod_s6:cmods6_demo.zip|ZIP}}
  * Cmod S6 Master UCF File for ISE designs: {{:cmod_s6:cmod_s6_master_ucf.zip|ZIP}}
  * {{:reference:programmable-logic:cmod-s6:cmod_s6_dimensions.zip|Cmod S6 Mechanical Drawing }}

----

{{tag>programmable-logic programmable-logic-start cmod-s6 resource-center}}