~~NOTOC~~  
 
====== Cmod A7 ====== 
{{Digilent Infobox
| Store Page = https://digilent.com/shop/cmod-a7-breadboardable-artix-7-fpga-module/
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/4-fpga/
| Title = Cmod A7
| Subtitle = Breadboardable Artix-7 FPGA Module
| Header = Features
| Bullet = Programmable over JTAG and Quad-SPI Flash
| Bullet = 1 MSPS on-chip ADC
| Header = Key Specifications
| LUTs =  10,400 (15T) \\ 20,800 (35T)
| Flip-flops = 20,800 (15T) \\ 41,800 (35T)
| Block RAM = 112.5KB (15T) \\ 225KB (35T)
| SRAM = 512KB with an 8-bit bus \\ and 8ns access time
| Quad-SPI Flash = 4MB
| Header = Connectivity and Onboard I/O
| Pmod Connectors = 1 with 8 Digital I/O
| Connectors = 48-pin DIP with 44 Digital I/O \\ and 2 Analog inputs (0-3.3V)
| Buttons = 2
| LEDs = 2
| RGB LED = 1
| Header = Electrical
| Power = USB or external 3.3-5.5V supply
| Header = Physical
| Width = 0.7 in
| Length = 2.75 in
| Header = Design Resources
| Fritzing Part = {{ :reference:programmable-logic:cmod-a7:cmod_a7.fzpz |}}
| 3D STEP = {{ :reference:programmable-logic:cmod-a7:cmod_a7.zip |}}
| Vivado Board Files = [[/vivado/boardfiles2015 | 2015.1 and newer]] \\ [[/vivado/boardfilesold | 2014.4 and older]]
| Master XDC = {{https://raw.githubusercontent.com/Digilent/CmodA7/master/Resources/XDC/CmodA7_Master.xdc | GitHub}}
| Github Repo = {{:reference:programmable-logic:cmod-a7:cmoda7-master.zip|ZIP}}
| Header = Documentation
| Primary IC = [[https://docs.xilinx.com/v/u/en-US/ds181_Artix_7_Data_Sheet | XC7A15T & XC7A35T]] 
| Reference Manual = [[programmable-logic/cmod-a7/reference-manual]]
| Schematic = {{:reference:programmable-logic:cmod-a7:cmod_a7_sch.pdf|Rev. B}}
| Header = Design Resources
| 3D Model = {{:reference:programmable-logic:cmod-a7:Cmod_A7-3D.zip|STP Model}}
| Mechanical Drawing = {{:reference:programmable-logic:cmod-a7:cmod_a7_dimensions.zip|DXF }}
}} 

{{page>reference-manual}} \\ \\
 
===== Documentation =====
{{topic>cmod-a7 +doc -legacy}}

  * {{reference:programmable-logic:cmod-a7:cmod_a7_sch.pdf|Cmod A7 Schematic (Rev. B)}}
  * {{reference:programmable-logic:cmod-a7:cmod_a7_sch_rev_c0.pdf|Cmod A7 Schematic (Rev. C)}}

----
===== Tutorials =====

  * [[programmable-logic:guides:installing-vivado-and-vitis]]
    * Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
  * [[programmable-logic:guides:getting-started-with-ipi]]
    * Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
  * [[programmable-logic:guides:getting-started-with-vivado]]
    * Walks through using Vivado to create a simple design that blinks a single LED.
  * [[learn/programmable-logic/tutorials/pmod-ips/start]]
    * Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
    * It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.

  * [[learn/programmable-logic/tutorials/cmod-a7-programming-guide/start]]
  * [[learn/programmable-logic/tutorials/htsspisf/start]]
  * [[learn/programmable-logic/tutorials/program_fpgas_through_multisim/start]]

----

===== Example Projects =====
{{topic>cmod-a7 +project -legacy}}

  * [[https://forum.digilentinc.com/topic/2866-cmod-a7-35t-demo-project/|Link to Community Project to test the XADC, GPIO, buttons, LEDs, and SRAM]]

----
===== Additional Resources =====
  * [[http://www.xilinx.com/support/university/workshops.html | Xilinx Vivado Workshop Materials]]
  * {{:reference:programmable-logic:cmod-a7:cmod_a7_dimensions.zip|Cmod A7 Mechanical Drawing }}

----

{{tag>programmable-logic programmable-logic-start cmod-a7 resource-center}}