~~NOTOC~~ 
     
====== Arty Z7 ======
{{Digilent Infobox
| Store Page = https://digilent.com/shop/arty-z7-zynq-7000-soc-development-board/
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com
| Title = Arty Z7  
| Subtitle = Zynq for Hobbyists and Makers
| Header = Features
| Bullet = Full support for Vivado, SDSoC, and Petalinux design environments
| Bullet = 650MHz dual-core Cortex-A9 processor with tightly integrated Xilinx FPGA 
| Bullet = 512 MB DDR3
| Bullet = Wide range of USB, Ethernet, Video and Audio connectivity
| Bullet = Arduino shield and Pmod connectors for adding-on hardware devices
| Bullet = Programmable from JTAG, Quad-SPI flash, and microSD card
| Header = Key FPGA Specifications
| Part Number = XC7Z020-1CLG400C \\ (XC7Z010-1CLG400C*)
| Logic slices = 13,300 (4,400*)
| 6-input LUTs =  53,200 (17,600*)
| Flip-Flops = 106,400 (35,200*)
| Block RAM = 630 KB (270 KB*)
| DSP Slices = 220 (80*)
| Clock Resources = Zynq PLL with 4 outputs \\ 4 PLLs (2 PLLs*) \\ 4 MMCMs (2 MMCMs*) \\ 125 MHz external clock
| Internal ADC = Dual-channel, 1 MSPS
| Bullet = (* -7010 variant value in parentheses when different)
| Header = Connectivity and On-board I/O
| USB = USB-UART \\ USB-JTAG Programmer \\ USB Host
| Ethernet = Gigabit Ethernet PHY
| HDMI = Sink (input) \\ Source (output)
| Audio = PWM driven mono audio output \\ with 3.5mm jack
| Pmod Connectors = 2
| Other Connectors = Arduino/chipKIT shield connector
| Switches = 2 slide switches
| Buttons = 4 Push buttons 
| LEDs = 4 LEDs, 2 RGB LEDs
| Header = Electrical
| Power Inputs = USB \\ 7V-15V External source
| Header = Physical
| Width = 3.46 in (88 mm)
| Length = 4.3 in (109.2 mm)
| Header = Design Resources
| Mechanical Drawing = {{:reference:programmable-logic:arty-z7:arty_z7_dimensions.zip|DXF }}
}}

{{page>reference-manual}} \\ \\

 ===== Documentation =====
{{topic>arty-z7 +doc -legacy -in-work}}

----
===== Tutorials =====

  * [[programmable-logic:guides:installing-vivado-and-vitis]]
    * Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
  * [[programmable-logic:guides:getting-started-with-ipi]]
    * Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
  * [[programmable-logic:guides:getting-started-with-vivado]]
    * Walks through using Vivado to create a simple design that blinks a single LED.
  * [[learn/programmable-logic/tutorials/pmod-ips/start]]
    * Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
    * It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.

----
===== Example Projects =====
{{topic>arty-z7 +project -legacy -in-work}}

----
===== Additional Resources ===== 
  * [[intro-to-fpga]]

  * [[https://support.xilinx.com/s/article/776702|Adam Taylor: Quick FLIR thermal vision for Arty Z7]]
  * [[https://www.rs-online.com/designspark/getting-started-guide-with-xilinx-sdsoc-on-arty-z7-20|Adam Taylor: Software Defined SoC on Arty Z7-20, Xilinx ZYNQ evaluation board]]
  * [[https://support.xilinx.com/s/article/777757|Adam Taylor: Software for FLIR thermal imager on Arty Z7]]
  * [[https://support.xilinx.com/s/article/762097|Adam Taylor: Pmods!]]
  * [[https://support.xilinx.com/s/article/764448|Adam Taylor: Pmods -- What if there is no driver?]]
  * [[https://www.hackster.io/adam-taylor/programming-python-on-zynq-fpga-ec4712|Adam Taylor: Programming Python on Zynq FPGA]]
  * [[https://www.hackster.io/adam-taylor/use-python-zynq-and-opencv-to-implement-computer-vision-361e1b|Adam Taylor: Use Python, Zynq and OpenCV to Implement Computer Vision]]
  * [[https://www.xilinx.com/support/university/workshops.html|Xilinx Vivado Workshop materials]]
  * {{reference:programmable-logic:arty-z7:arty_z7.zip|Arty Z7 STP file (large file format)}}
  * {{:reference:programmable-logic:arty-z7:arty_z7_dimensions.zip|Arty Z7 Mechanical Drawing }}
  * OOB bit file {{ :reference:programmable-logic:arty-z7:boot.zip |}}
  

----

{{tag>programmable-logic programmable-logic-start arty-z7 resource-center}}