~~NOTOC~~ 
   
====== Pmod OLED  ======
  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-oled-128-x-32-pixel-monochromatic-oled-display/
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
| Title = Pmod OLED
| Subtitle = 128 x 32 Pixel Monochromatic OLED Display
| Header = Features
| Bullet = 128×32 pixel graphic OLED display
| Bullet = Clock speeds of up to 10 MHz
| Bullet = Internal display buffer
| Bullet = 16 different brightness settings
| Bullet = Small PCB size for flexible designs
| Bullet = 12-pin Pmod connector with SPI interface
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.8 in (4.57 cm)
| Length = 0.80 in (2.03cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodoled:pmodoled.fzpz| }}
| 3D STP CAD model = {{reference:pmod:pmodoled:pmodoled_cad.zip|CAD Model}}
| Header = Documentation
| Primary IC = [[https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf | SSD1306]]
| Reference Manual = [[pmod/pmodoled/reference-manual]]
| Schematic = {{:reference:pmod:pmodoled:pmodoled_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = CS
| Pin 2 = MOSI
| Pin 3 = NC
| Pin 4 = SCLK
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = D/C
| Pin 8 = RES
| Pin 9 = VBATC
| Pin 10 = VDCC
| Pin 11 = GND
| Pin 12 = VCC
}}

{{page>reference-manual}} \\ \\
 

===== Example Projects =====
==Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * {{:reference:pmod:pmodoled:oled.zip|Library and MPIDE Example}}
  * {{:reference:pmod:pmodoled:pmodoled_mplab_library.zip|Library and MPLAB Example}}
  * [[http://www.instructables.com/id/Behind-You-Anti-Creeper-Alert-System/|Behind You! Anti Creeper Alert System]] - Community Project
  * [[http://www.instructables.com/id/Wearable-Wellness-System-Digilent-Desing-Contest-2/|Wearable Wellness System]] - Community Project
  * [[http://www.instructables.com/id/Health-and-Security-Cloud-System-Digilent-Design-C/|Health and Security Cloud System]] - Community Project
  * [[http://www.instructables.com/id/3D-Road-Mapping-Autovehicle/|3D road mapping autovehicle]] - Community Project
  * [[https://www.hackster.io/mmigs/using-the-pmod-oled-with-arduino-uno-6c3b7b|Using the Pmod OLED with Arduino Uno]] - Application note
==Programmable Logic==
  * {{:reference:pmod:pmodoled:pmodoledctrl_verilog.zip|Nexys 3 Verilog Example - ISE 14.2}}
  * {{:reference:pmod:pmodoled:pmodoledctrl.zip|Nexys 3 VHDL Example - ISE 14.2}}
  * {{:reference:pmod:pmodoled:nexys4oleddemo.zip|Nexys 4 VHDL Example - Vivado 15.1}}
  * [[http://www.instructables.com/id/Sounding-Rocket-Avionics-With-FPGA/|Sounding Rocket Avionics with FPGA]] - Community Project
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
     * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.

----


===== Additional Resources =====
  * Digilent Forum user jmw created a Microblaze port of the [[https://github.com/jmwilson/Adafruit-GFX-Library_MicroBlaze|Adafruit GFX]] and [[https://github.com/jmwilson/Adafruit_SSD1306_MicroBlaze|Adafruit SSD1306]] libraries for the Arty, which likely can be made compatible with the Pmod OLED. The original Forum thread is available [[https://forum.digilentinc.com/topic/3407-adafruit-ssd1306-library-on-microblaze/|here]].
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-spi pmodoled oled resource-center}}