~~NOTOC~~ 
   
====== Pmod NIC100  ======
  
{{Digilent Infobox
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
| Title = Pmod NIC100
| Subtitle = Network Interface Controller
| Header = Features
| Bullet = IEEE 802.3 compatible Ethernet controller
| Bullet = 10/100 Mb/s data rates
| Bullet = MAC and PHY support
| Bullet = 10BASE-T support and 100Base-TX support
| Bullet = 12-pin Pmod connector with SPI interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type2A
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 1.8 in (4.57 cm)
| Length = 0.80 in (2.03cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodnic100:pmodnic100.fzpz| }}
| Header = Documentation
| Primary IC = [[http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdf | ENC424J600]]
| Reference Manual = [[pmod/pmodnic100/reference-manual]]
| Schematic = {{reference:pmod:pmodnic100:pmodnic100_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = CS
| Pin 2 = MOSI
| Pin 3 = MISO
| Pin 4 = SCLK
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = ~INT/SPISEL
| Pin 8 = NC
| Pin 9 = NC
| Pin 10 = NC
| Pin 11 = GND
| Pin 12 = VCC
}}

{{page>reference-manual}} \\ \\
 

===== Example Projects =====
==Microprocessor==
  * [[/agreement|Libraries and MPIDE Example]]
    * Note: Must agree to Microchip's Terms of Use in order to download MPIDE library
==Programmable Logic==
  * No programmable logic example projects are available for the Pmod NIC100

----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-spi pmodnic100 network ethernet resource-center}}