~~NOTOC~~ 
   
====== Pmod KYPD ======

  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-kypd-16-button-keypad/
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
| Title = Pmod KYPD
| Subtitle = 16-button Keypad
| Header = Features
| Bullet = 16 momentary push-buttons
| Bullet = Can detect simultaneous button presses
| Bullet = Isolated rows and columns
| Bullet = 12-pin Pmod port with GPIO interface
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 1
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 3.4 in (8.64 cm)
| Length = 2.7 in (6.86 cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmodkypd:pmodkypd.fzpz| }}
| Header = Documentation
| Reference Manual = [[pmod/pmodkypd/reference-manual]]
| Schematic = {{reference:pmod:pmodkypd:pmodkypd_sch.pdf| }}
| 3D CAD file = {{reference:pmod:pmodkypd:Pmod_KYPD.zip| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
| Pin 1 = COL4
| Pin 2 = COL3
| Pin 3 = COL2
| Pin 4 = COL1
| Pin 5 = GND
| Pin 6 = VCC
| Pin 7 = ROW4
| Pin 8 = ROW3
| Pin 9 = ROW2
| Pin 10 = ROW1
| Pin 11 = GND
| Pin 12 = VCC
}}

{{page>reference-manual}} \\ \\
 


===== Example Projects =====
==Microprocessor==
  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
  * {{:reference:pmod:pmodkypd:kypd.zip|Library and MPIDE Example}}
  * [[https://www.hackster.io/mmigs/using-the-pmod-kypd-with-arduino-uno-5a9a3c|Using the Pmod KYPD with Arduino Uno]] - Application note
==Programmable Logic==
  * {{:reference:pmod:pmodkypd:pmodkypd_demo_verilog.zip|Nexys 3 Verilog Example - ISE 14.2}}
  * {{:reference:pmod:pmodkypd:pmodkypd_ise_demo.zip|Nexys 3 VHDL Example - ISE 13.4}}
  * {{:reference:pmod:pmodkypd:pmodkypd_demo.zip|Nexys 3 VHDL Example - ISE 14.2}}
  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.


----

===== Additional Resources =====
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-gpio pmodkypd keypad resource-center}}