~~NOTOC~~ 
   
====== Pmod DPOT  ======
  
{{Digilent Infobox
| Store Page = https://digilent.com/shop/pmod-dpot-digital-potentiometer/
| Manual = [[reference-manual]]
| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
| Title = Pmod DPOT
| Subtitle = Digital Potentiometer
| Header = Features
| Bullet = Digital potentiometer with 8-bit resolution
| Bullet = Select desired resistance from 60 Ω to 10 kΩ
| Bullet = Single or double tap detection
| Bullet = 6-pin Pmod port with SPI interface
| Bullet = Free fall detection
| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 2
| Header = Electrical
| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
| Specification Version = 1.2.0
| Logic Level = 3.3V
| Header = Physical
| Width = 0.9 in (2.28 cm)
| Length = 0.80 in (2.03cm)
| Header = Design Resources
| Fritzing Part = {{reference:pmod:pmoddpot:pmoddpot.fzpz| }}
| Header = Documentation
| Primary IC = [[http://www.analog.com/media/en/technical-documentation/data-sheets/AD5160.pdf | AD5160]]
| Reference Manual = [[pmod/pmoddpot/reference-manual]]
| Schematic = {{reference:pmod:pmoddpot:pmoddpot_sch.pdf| }}
| Header = J1 Pinout
| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
| Pin 1 = ~CS
| Pin 2 = MOSI
| Pin 3 = (NC)
| Pin 4 = SCLK
| Pin 5 = GND
| Pin 6 = VCC
}}

{{page>reference-manual}} \\ \\
 


===== Example Projects =====

== Microprocessor==
  * [[https://www.hackster.io/mmigs/using-the-pmod-dpot-with-arduino-uno-599aa5|Using the Pmod DPOT with Arduino Uno]] - Application note 

== Programmable Logic ==
  * No programmable logic example projects are available for the Pmod DPOT




----

===== Additional Resources =====
  * [[https://wiki.analog.com/resources/fpga/xilinx/pmod/ad5160|ZedBoard Demo Project]]
  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}

----

{{tag>pmod pmod-start pmod-spi pmoddpot potentiometer resource-center}}